• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.117-120
• /
• 1996

In this paper, a new approach to acquire the cross-sentional image for automatic solder joint inspection of double-sided PCB using X-ray source is presented. We designed the apparatus with fixed X-ray source to realize the cross-sectional image by tunning object and detector synchronously. The cross-sectional images are captured at several view angle of X-ray source, the geometric image distortions caused by view angle and the shape of image intensifier are compensated. The precision variation of cross-sectional image by the change of view angle was investigated. Also we acquired the cross-sectional image to the solder joint of double-sided PCB and reconstructed the shape of solder joint.

• 대한전자공학회논문지TC
• /
• 제39권8호
• /
• pp.26-32
• /
• 2002

본 논문에서는 DS/CDMA 시스템에서 적응 배열 안테나에 부귀환 직교 다중 사용자 검출기를 결합한 준 최적 수신기에 관한 성능을 분석하였다. 적응 배열 안테나는 빔 형성 기법을 사용하여 사용자 신호 방향으로는 빔을 형성하고 다른 방향의 사용자 신호로는 널(null)빔을 형성하여 공간적으로 간섭을 제거할 수 있다. 그러나 유사한 방향에서 입사하는 사용자들 간에 대해서는 기존의 적응 배열 안테나만으로는 간섭을 제거할 수 없다. 본 논문에서는 적응 배열 안테나에 부귀환 직교 다중 사용자 검출기(ODFD)를 결합함으로 써 적응 배열 안테나에서 제거할 수 없었던 유사한 입사각을 갖는 사용자들에 대한 간섭을 제거할 수 있는 수신기의 성능을 비교하여 분석하였다. 또한, 부귀환 역상관 다중사용자 검출기(DDFD)를 채택하였을 경우와도 비교하여 부귀환 직교 다중사용자 검출기를 사용함으로써 성능은 유사한 반면 복잡도를 줄일 수 있음을 보였다.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.236-240
• /
• 2016

The purpose of this study is to propose a novel high sensitivity neuro-PET design. The improvement of sensitivity in neuro-PET is important because it can reduce scan time and/or radiation dose. In this study, we proposed a novel PET detector design that combined conical shape detector with cylindrical one to obtain high sensitivity. The sensitivity as a function of the oblique angle and the ratio of the conical to cylindrical portion was estimated to optimize the design of brain PET using Monte Carlo simulation tool, GATE. An axial sensitivity and misplacement rate by penetration of ${\gamma}$ rays were also estimated to evaluate the performance of the proposed PET. The sensitivity was improved by 36% at the center of axial FOV. This value was similar to the calculated value. The misplacement rate of conical shaped PET was about 5% higher than the conventional PET. The results of this study demonstrated the conical detector proposed in this study could provide subsequent improvement in sensitivity which could allow to design high sensitivity PET for brain imaging.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.970-977
• /
• 2007

Absolute position detector which is one of the major equipment in the field of factory automation, not only perceives the absolute position of the rotary machine but also outputs switch data according to the given angle. Absolute position detector is composed of sensor module and its controller. In this paper, a sensor driver is implemented using FPGA with VHDL. This chip has a less form factor than conventional circuit. A test shows reliable precision within THD(total harmonic distortion) of 0.2% which can be applicable commercially. Also, FPGA-based phase error compensation methods were newly discussed. In the future, more research will be conducted to enhance the precision by the introduction of 3-phase transformer.

• 한국광학회지
• /
• 제5권3호
• /
• pp.431-436
• /
• 1994

가시광선과 근적외선에서 광학유리 및 액체의 굴절률을 정밀측정하기 위하여 Littrow 프리즘을 이용한 자동시준형 분광굴절률 측정장치를 설계, 제작하였다. 먼저 여러가지 측정변수를 변화시켜 측정정확도를 분석하였으며 rotary encoder와 position sensitive detector를 이용한 고분해능 각도측정장치와 항온장치등을 제작하였다. 마이크로 컴퓨터를 사용하여 측정자동화 하였으며 자세한 설계변수와 성능평가 결과를 제시하였다.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.31-35
• /
• 2008

목적: 본 논문은 CCTV 카메라용 렌즈 설계를 triplet형으로 광학 설계를 하였다. 방법: 초점거리를 56 mm, 유효경을 20 mm 그리고 화각을 $5^{\circ}$로 한 망원 렌즈 형태이고, 설계하고자 하는 카메라의 CCD array detector의 크기를 2/3인치로 하였다. 결과: 광학계의 성능은 ray-fan과 spot diagram 그리고 회절 광학적인 MTF를 계산하여 평가하였고, 파장은 Fraunhofer C, d 및 F-line에 대해 achromat 되었으며 MTF 값도 tangential과 sagittal MTF 모두 50 line pairs/mm의 공간 주파수에 70% 정도가 나왔다. 결론: triplet형으로 비교적 저가 보급형 감시용 목적 CCTV 카메라를 설계하였고 충분히 실용적이라 생각된다.

• 천문학회보
• /
• 제43권1호
• /
• pp.72.2-72.2
• /
• 2018

The Opposition Effect (OE) is an enhancement of the brightness of a reflecting light as the phase angle (the Sun-target-observer angle) approaches zero. The mechanisms have been studied both theoretically and experimentally and nowadays recognized that there are two major mechanisms, namely, coherent backscattering OE (CBOE) and shadow hiding OE (SHOE). From data analyses of an S-type asteroid Itokawa taken with the Hayabusa spacecraft onboard camera, it is suggested that the CBOE would be dominant at phase angle smaller than ~ 1.4 deg, while SHOE dominates at larger phase angles (M. Lee & M. Ishiguro, under review). The study on the physical parameters which affect the OE, such as size and composition, will lead us to find a way to disentangle each of them from observation. The experiments in lab, however, faces two major difficulties: (a) the detector blocks the incident light if phase angle is nearly zero and (b) incident and emission angles must be controlled with high angular resolution to prevent blurring of OEs at different phase angles in one measurement. In this presentation, we introduce a new apparatus which has been installed at Seoul National University to investigate the OE in our lab, and summarize the initial results. It will be a valuable starting point to establish infrastructure in Korea, and will shed light on the investigation of OE physics using laboratory simulants.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.1-5
• /
• 2016

본 논문은 영상화재감지기(Video Fire Detector)의 시험 및 설치기준에 관한 연구로서 FM Approvals, UL, ISO7240 및 NFPA 72 기준들을 서로 비교분석하여 국가화재안전기준 203 (NFSC 203)에 반영되어야 할 기준들을 제안하였다. 영상화재감지기의 시험과 관계된 FM Approvals 기준에는 연기형, 불꽃형으로 분류되고 비화재보시험이 있었으나 UL 기준에는 연기형만 제시되어 있었다. 외국 기준인 ISO 7240에서는 화재현상 검출유형 등 6가지를, NFPA 72에서는 화재현상 검출유형 등 3가지를 조사하였다. CCTV 설치 표준공법에서는 영상화재감지기의 설치기준에 필요한 항목이 15가지가 있었으며 설치방법에 따라 각 분야별 기준이 제시되어 있었다. 영상화재감지기 적용을 위해서는 감지기 시험항목 중 용어의 정의, 감지기의 구분, 구조 및 기능에 관련항목을 삽입하고 감도조정, 비화재보방지, 주위온도시험, 유효감지거리 및 감도와 시야각, 노화시험, 살수시험, 내화시험의 7개 항목의 적용이 필요하다. 현장 설치를 위해서는 국가화재안전기준 203 (NFSC 203)에 작동환경 및 조도기준을 설정하고 음향장치, 표시등의 설치거리 등의 기준을 삽입하여야 한다.

• Biomedical Engineering Letters
• /
• 제8권4호
• /
• pp.383-392
• /
• 2018

For prompt gamma ray imaging for biomedical applications and environmental radiation monitoring, we propose herein a multiple-scattering Compton camera (MSCC). MSCC consists of three or more semiconductor layers with good energy resolution, and has potential for simultaneous detection and differentiation of multiple radio-isotopes based on the measured energies, as well as three-dimensional (3D) imaging of the radio-isotope distribution. In this study, we developed an analytic simulator and a 3D image generator for a MSCC, including the physical models of the radiation source emission and detection processes that can be utilized for geometry and performance prediction prior to the construction of a real system. The analytic simulator for a MSCC records coincidence detections of successive interactions in multiple detector layers. In the successive interaction processes, the emission direction of the incident gamma ray, the scattering angle, and the changed traveling path after the Compton scattering interaction in each detector, were determined by a conical surface uniform random number generator (RNG), and by a Klein-Nishina RNG. The 3D image generator has two functions: the recovery of the initial source energy spectrum and the 3D spatial distribution of the source. We evaluated the analytic simulator and image generator with two different energetic point radiation sources (Cs-137 and Co-60) and with an MSCC comprising three detector layers. The recovered initial energies of the incident radiations were well differentiated from the generated MSCC events. Correspondingly, we could obtain a multi-tracer image that combined the two differentiated images. The developed analytic simulator in this study emulated the randomness of the detection process of a multiple-scattering Compton camera, including the inherent degradation factors of the detectors, such as the limited spatial and energy resolutions. The Doppler-broadening effect owing to the momentum distribution of electrons in Compton scattering was not considered in the detection process because most interested isotopes for biomedical and environmental applications have high energies that are less sensitive to Doppler broadening. The analytic simulator and image generator for MSCC can be utilized to determine the optimal geometrical parameters, such as the distances between detectors and detector size, thus affecting the imaging performance of the Compton camera prior to the development of a real system.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1277-1281
• /
• 2020

A novel ceramic Gas Electron Multiplier (GEM) has been developed to meet the demand of high counting rate for the neutron detection which is an alternative to ³He-based detector at China Spallation Neutron Source (CSNS). An experiment was performed to measure the neutron transmittance of ceramic-GEM and FR4-GEM at the small angle neutron scattering (SANS) instrument. The result showed the ceramic-GEM has higher transmittance and less self-scattering especially for cold neutrons. One single ceramic GEM could give a gain of 10²-10⁴ in the mixture gas of Ar and CO₂ (90%:10%) and its energy resolution was about 27.7% by using ⁵⁵Fe X ray of 5.9 keV. A prototype has been developed in order to investigate the performances of the ceramic GEM-based neutron detector. Several neutron beam tests, including detection efficiency, spatial resolution, two-dimensional imaging, and wavelength spectrum, were carried out at CSNS and China Mianyang Research Reactor (CMRR). The results show that the ceramic GEM-based neutron detector is a good candidate to measure the high intensity neutrons.