• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1363-1372
• /
• 2011

Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.393-398
• /
• 2007

본 논문은 작업 현장에서 청각장애인의 의사소통을 보조하는 한국 수화 메시지 보드의 개발에 대하여 다룬다. 청각 장애인은 일상적인 직업 현장에서 의사소통이 자유롭지 못하여 업무에 잘 적응하지 못하고 사내의 인간관계에 많은 어려움을 겪고 있다. 문자를 이용한 정보 전달을 통해 모든 의사소통을 대체할 수 있을 것이라는 일반적인 생각과는 달리, 청각장애인의 경우 비장애인과 비교하여 사물의 개념 습득에 어려움이 있을 수 있으며 마찬가지로 사용하는 어휘수도 제한적인 경우가 많아 문자를 통한 의사소통에는 명확한 한계가 존재한다. 실제로 청각 장애 근로자가 이직하는 사유로 의사소통이나 인간관계가 높은 비중을 차지한다. 수화 메시지 보드는 크게 사내 네트워크를 이용한 공지 사항 전달을 위한 용도와 복수 개의 메시지 보드 간 문자 송수신의 용도로 사용 가능하다. 비장애인이 청각장애인에게 문자 입력으로 의사를 전달하면, 전달된 문자는 문자-수화 번역기를 통해 자동으로 수화로 번역되어 아바타의 수화 동작으로 화면에 출력된다. 전체 시스템은 수화 아바타를 포함한 그래픽 유저 인터페이스 (GUI), 수화 데이터베이스 및 한글 형태소/문장 분석기를 포함하는 문자-수화 번역기, 그리고 TCP/IP 기반의 문자 전송기의 세 부분으로 나뉜다. 본 논문에서는 수화 데이터베이스의 단어 선정을 위한 대상 작업 현장을 청각 장애 근로자가 타 직업에 비해 많은 비중을 차지하는 전자 부품 조립 업체로 한정하였다. 수화 데이터베이스는 자음 14종, 모음 17종, 숫자 15종, 일상생활 용어 1000종, 전자 부품 조립 업체에 특화된 단어 50종 및 직업 교육 관련 용어 50종으로 이루어진 총 1146종의 수화 단어를 포함하며, 수화 데이터베이스에 등록되지 않은 단어에 대해서는 지화로 표현하도록 한다. 이 중 전자 부품 조립 업체 특화 단어와 관련하여서는, 현재 동일한 분야의 작업 현장이라 하더라도 각 사업장 간 사용되는 수화가 통일되지 않아 문헌 조사 및 현장 조사를 통해 사용 빈도가 높고 형태가 공통적인 50종을 추려내었다. 본 연구는 실제 업무현장에서 청각장애인이 겪는 의사소통의 문제를 효과적으로 해결함으로써, 청각장애인이 직업 현장에 보다 쉽게 적응하도록 도움을 줄 뿐만 아니라, 일을 통해 자아 실현을 하도록 돕는 방안이 될 수 있다는 점에서 중요한 의의를 갖는다.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.55-61
• /
• 2006

In modern society, development of medical technology has extended the human life span. However, it has also caused some side-effects. Mostly old people who live alone are not available the medical service quickly when they are in emergency situations. Moreover heart related diseases as well are rapidly increasing with aging. This study proposes the emergency medical alarm system. This system measures the physiological signals such as ECG(electrocardiogram), temperature, and motion data, analyzes those data automatically, and sends the urgent message to the Emergency Medical Center and to their family. There are two main parts in the system. In the first part, physiological data acquisition part, the troublesome addition and deletion of body signals on existing proposed systems have been supplemented, which led to the modulized production by means of ECG sensor module, temperature sensor module, acceleration sensor module. The other part is mobile unit, which includes signal processing and transmission functions. And bluetooth allows two parts to communicate with each other. Data that are processed in the mobile unit are stored in the PC database through the WLAN using TCP/IP protocol.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.953-956
• /
• 2003

Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency Is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of PV system. This paper describes the design of the monitoring system for sensing the monitoring data and indirect controlling of the PV system. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-on card based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, free of the place restriction and unmanned system of the generation plants, etc..

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.3
• /
• pp.22-30
• /
• 2001

This paper investigated future telemedicine as implementation of the telemonitoring system using LAN environment. For telemonitoring system rapidly implementation used the PC compatible embedded computing system in the ROMDOS and application program used the WATTCP that free TCP/IP Stack. Host computer program - programed by Visual C++ - had saved ECG signal and Patient Data coming inside Embedded PC and displayed. Embedded PC acquired ECG signal and transmitted a Packet to Host Computer. Host Computer remote access Embedded PC. This structure is the same Client/Sever Model. This system will be basic telemedicine model. There are problems of realtime telemonitoring because of network delay and data packet. Because of these problems, telemedicine systems will be required faster network speed and method of bio-signal transmission.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.97-105
• /
• 2008

The various mutations of the malicious codes are fast generated on the network. Also the behaviors of them become intelligent and the damage becomes larger step by step. In this paper, we suggest the method to select the useful measures for the detection of the codes. The method has the advantage of shortening the detection time by using header data without payloads and uses connection data that are composed of TCP/IP packets, and much information of each connection makes use of the measures. A naive estimator is applied to the probability distribution that are calculated by the histogram estimator to select the specific measures among 80 measures for the useful detection. The useful measures are then selected by using relative entropy. This method solves the problem that is to misclassify the measure values. We present the usefulness of the proposed method through the result of the detection experiment using the detection patterns based on the selected measures.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2014

This paper presents the implementation of a control system of pellet boiler using wood pellet as carbon neutral material. The system also has the additional features to provide remote controlling and monitoring based on home networking technology through either public switched telephone networks or mobile communication networks. It consists of three kinds of sub-modules; a main controller provides basic and additional features such as a setting of temperature, a supplying of wood pellet, a controlling of ignition and fire-power, and a removing of soot. The second is temperature controller of individual rooms which is connected to the main controller through RS-485 links. And interface modules with PSTN and mobile networks can support remote controlling and monitoring the functions. The test results under the heating area of $172m^2$ show a thermal efficiency of 93.6%, a heating power of 20,640kcal/hr, and a fuel consumption of 5.54kg/hr. These results are superior to those of the conventional pellet boilers. In order to obtain the such high performance, we newly applied a 3-step ignition flow, a flame detection by $C_dS$ sensor, and a fire-power control by fine controlling of shutter to our pellet boiler.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.262-269
• /
• 2020

Recently, many attempts have been made to reduce the time required for payment in various shopping environments. In addition, for the Fourth Industrial Revolution era, artificial intelligence is advancing, and Internet of Things (IoT) devices are becoming more compact and cheaper. So, by integrating these two technologies, access to building an unmanned environment to save people time has become easier. In this paper, we propose a smart shopping cart system based on low-cost IoT equipment and deep-learning object-detection technology. The proposed smart cart system consists of a camera for real-time product detection, an ultrasonic sensor that acts as a trigger, a weight sensor to determine whether a product is put into or taken out of the shopping cart, an application for smartphones that provides a user interface for a virtual shopping cart, and a deep learning server where learned product data are stored. Communication between each module is through Transmission Control Protocol/Internet Protocol, a Hypertext Transmission Protocol network, a You Only Look Once darknet library, and an object detection system used by the server to recognize products. The user can check a list of items put into the smart cart via the smartphone app, and can automatically pay for them. The smart cart system proposed in this paper can be applied to unmanned stores with high cost-effectiveness.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.315-319
• /
• 1996

We have developed a prototype patient monitoring system including module-based bedside units, interbed network, and central stations. A bedside unit consists of a color monitor and a main CPU unit with peripherals including a module controller. It can also include up to 3 module cases and 21 different modules. In addition to the 3-channel recorder module, six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmogaph are provided as parameter modules. Modules and a module controller communicate with up to 1Mbps data rate through an intrabed network based on RS-485 and HDLC protocol. Bedside units can display up to 12 channels of waveforms with any related numeric informations simultaneously. At the same time, it communicates with other bedside units and central stations through interbed network based on 10Mbps Ethernet and TCP/IP protocol. Software far bedside units and central stations fully utilizes gaphical user interface techniques and all functions are controlled by a rotate/push button on bedside unit and a mouse on central station. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances. In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we are developing a relational database server dedicated to the patient monitoring system. We are also developing a clinical workstation with which physicians can review and examine the data from patients through various kinds of computer networks far diagnosis and report generation. Portable bedside units with LCD display and wired or wireless data communication capability will be developed in the near future. New parameter modules including cardiac output, capnograph, and other gas analysis functions will be added.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.