• 전기학회논문지
• /
• 제64권5호
• /
• pp.824-829
• /
• 2015

The rotary type testing machine undergoes mechanical stress as an external force is applied. In case of the rotary type testing machine, even a tiny flaw results in a fatal demage because the size of the machine is huge. Therefore, when designing the rotary type testing machine, it is necessary to secure a safety factor with the mechanical stress analysis in order to prevent the machine from being destroyed due to scattering or transformation of rotating field. This thesis proposes a LSM rotary type tesitng machine which rotates at the speed of up to 600km/h. And the mechanical stress is considered in order that the safety factor remains above 1.5 at the maximum speed. In addition, because normal force as well as thrust occurs in the machine, the normal force exerted was considered through the strength analysis. Finally, a design plan which enables to weaken the normal force affecting the rotary type testing machine is introduced and its validity is proved by the results of FEM analysis.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.84-92
• /
• 1997

The purpose of this study is to develop a geometric error model and path compensation algorithm for rotating axes of the 5-axis machine tools, by a method to calibrate a rotary table using one master ball and three LVDTs. It was developed a new methodology to measure 3 translation errors of the rotary table and with a compensation procedure for setup errors of the master ball. The method is experimentally verified using a ball-table and on-machine inspection method. The results showed that the geometric error models with the path compensation strategy can be practically used as a means for improving the accuracy of the machine tools with rotary table.

• 한국기계가공학회지
• /
• 제15권4호
• /
• pp.23-29
• /
• 2016

Rotary machine is major equipment in industry. The rotary machine is applied for a machine tool, ship, vehicle, power plant, and so on. But a spindle fault increase product's expense and decrease quality of a workpiece in machine tool. A turbine in power plant is directly connected to human safety. National crisis could be happened by stopping of rotary machine in nuclear plant. Therefore, it is very important to know rotary machine condition in industry field. This study mentioned fault diagnosis algorithm with statistical parameter and empirical mode decomposition. Vibration locations can be found by analyze kurtosis of data from triaxial axis. Support vector of data determine threshold using hyperplane with fault location. Empirical mode decomposition is used to find fault caused by intrinsic mode. This paper suggested algorithm to find direction and causes from generated fault.

• 한국전자통신학회논문지
• /
• 제10권2호
• /
• pp.189-194
• /
• 2015

본 연구에서는 회전기계에서 발생할 수 있는 고장에 대한 안전진단에 대한 사례연구이다. 각각의 회전기계에 대하여 진동분석을 통한 고장발생유무를 각종의 측정 데이터를 이용하여 분석하여 향후에 발생할 수 있는 고장에 대한 안전진단에 대한 방법을 연구하였다. 본 연구에서 제안한 상태 감시 및 진단 방법을 적용한 결과, 회전기계의 추후 고장을 예측할 수 있었다.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.401-404
• /
• 2006

In order to select the seeding machine for mechanizing cultivation of rapeseed in southern areas of Korea, three different seeding machines, ridge rotary, power tiller ridge rotary, tractor ridge rotary were used for sowing one of the high yielding rapeseed cv. Hybrid with five different seeding methods. Seeding of ridge rotary was reduced the seeding effort with 45% and yield components such as plant height, ear length, number of branches and pods, pod length and seed setting rate were higher. The seeding of ridge rotary also was showed highest seed yield. On the basis of time requirement for seeding, vegetative and yield parameters ridge rotary seeding machine was a suitable seeding machine for rapeseed cultivation at the southern area of Korea.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.926-931
• /
• 2012

Rotary bar was cutting tool being in use for deburring scale after welding metal and for eliminating sharp edges. It was necessary to develop exclusive 6-axis machine being possible to process machining continuously for making an cutting edge of rotary bar and to revise easily machining program. This study aimed at the structural analysis of strength according to the configuration of new made 6-axis machine and at the machining accuracy and durability of rotary bar. As a result of test, the runout of new rotary bar manufactured out of 6-axis machine was decreased from 0.385 mm to 0.027mm extensively than old one. And good cutting ability and durability was obtained equal quality compared with imported products.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.208-213
• /
• 2012

In this paper, the radial error of a rotary table at five-axis machine tool is evaluated by utilizing ISO 230-2 and estimation method using double ball-bar. The geometric error of a rotary table is defined as position dependent geometric errors or position independent geometric errors according to their physical character. Then estimation method of geometric errors using double ball-bar is simply summarized including measurement path, parametric modeling and least squares approach. To estimate representative radial error, offset error, set-up error which affect to the double ball-bar data, mean value of measured data including CCW/CW-direction are used at estimation process. Radial errors are separated from measured data and used for evaluation with ISO 230-2. Finally, suggested evaluation method is applied to a rotary table at five-axis machine tool and its result is analyzed to improve the accuracy of the rotary table.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.290-294
• /
• 1996

In many application, LBLDCM is special-purpose devices in that, unlike their rotary counterparts, LBLDCM is tailored to specific needs. Whereas a rotary machine or a rotary motor interface with the mechanical systm through the shaft, a linear motor often interacts with the moving member(of the "rotor"), which is the mechanical system itself. This paper focuses on the load characteristics of LBLDCM.of LBLDCM.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.505-508
• /
• 2012

A permanent magnet flux switching (PMFS) machine has a simple rotor, whilst both magnets and coils are set in the stator, resulting in easy removal of heat due to both copper loss and eddy current loss in magnets. However, the volume of magnets used in PMFS machines is usually larger than in conventional PM machines, and leakage flux does exist at the non-airgap side. To make full use of the magnets and gain higher power density, a novel 3-dimensional (3D) field PMFS machine is developed. It combines merits of the tubular linear machine, external-rotor rotary machine and axial-flux rotary machine, hence, offers high power density and peak torque capability, as well as efficient utility of magnets owing to the unique configuration of triple airgap fields.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.965-970
• /
• 2016

Fuel used in the steel metallurgy industry is stored in huge stage systems called SILO. Fuel is released by RDM (Rotary Discharge Machine), at the place of utilization. RDM is located in the Silo, and is constituted of a main frame, driving part, discharging part and control part. RDM is combined to a direct motion on the rail in tunnel, having a rotary motion enabled by a motor. In this paper, we calculate the theoretical discharging capacity of RDM to confirm the correlation between design element and discharging capacity of RDM. Also, through structure analysis, we confirm the vulnerable point of RDM when it discharges the storage materials. We hope to apply these results to design a more efficient RDM.