• 대한치과기공학회지
• /
• 제31권2호
• /
• pp.45-52
• /
• 2009

Esthetic restorations have been widely used in dental practice, although many studies have focused on the development and improvement of all ceramic restorations. The success of esthetic restorations depends primarily on an optimal bond strength between various veneered ceramics and core materials for esthetic restorations. The purpose of this study was to compare the shear bond strength between various veneered ceramics and core materials for esthetic restorations. 30 metal cores and 20 zirconia cores were fabricated and divided into five groups according to veneered ceramic materials such as Creation porcelain powder, Cercon Ceram Kiss, and IPS e.max ZirPress. Thirty spacimens were prepared using Creation porcelain powder, veneered 3mm height and 3mm in diameter, over the metal cores (n=10). Twenty specimens were prepared using Cercon Ceram Kiss and Zirpress, veneered 3mm height and 3mm in diameter, over the zirconia cores (n=10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 1mm/min. Ultimate shear bond strength data were analyzed with One-way ANOVA and the Scheffe's test (p=.05). Within the limits of this study, the following conclusions were drawn: The mean shear bond strengths (MPa) were: 18.44 for Uni metal VH/Creation (NCUC); 18.72 for Heraenium/Creation (NCHC); 16.23 for Wirobond C/Creation (NCWC); 13.88 for Zirconia core/$110{\mu}m$ $Al_2O_3$ sandblasting/Cercon Ceram Kiss (ZS110P); 14.61 for Zirconia core/No surface treatment/IPS e.max ZirPress (ZNTH). The mean shear bond strength for NCUC (Uni metal VH/Creation), NCHC (Heraenium/Creation) and NCWC (Wirobond C/Creation) were significantly superior to ZS110P (Zirconia core/$110{\mu}m$ $Al_2O_3$ sandblasting/Cercon Ceram Kiss) and ZNTH(Zirconia core/No surface treatment/IPS e.max ZirPress) (p<0.05).

• 토지주택연구
• /
• 제6권2호
• /
• pp.49-60
• /
• 2015

북한이 2013년 5월 29일 경제개발구법을 제정하고, 같은 해 11월 21일 13개 지방급 경제개발구를 대외에 개방하였다. 이어 2014년 7월 23일 6개의 경제개발구를 추가로 개방하였는데, 이것은 북한이 1950년대 말부터 추진한 경제개발계획의 근간인 자급자족적이고 폐쇄적인 계획경제 운용노선으로부터의 커다란 전환이다. 북한은 사회주의 시장경제를 지향하는 중국과 달리 완전한 사회주의 건설을 목표로 하고 있으며, 계획경제의 안정적 관리를 위하여 자본주의 시장경제 요소를 일부 도입하여 시험하고 있다. 북한의 경제개발구를 통한 경제 활성화 추진전략은 북한 자체는 물론 인접한 한국과 중국의 정치 및 경제에 미치는 영향이 지대하다. 정부의 대북정책은 남북 간 경제적 상생관계 형성을 통해 정치적 통합을 목표로 하고 있다. 정부의 통일정책 비전은 한반도의 경제통합을 넘어 한반도를 대륙과 연결하는 유라시아 이니셔티브 실현을 통해 동북아시대에 주도권을 확보하는 것이다. 유라시아 이니셔티브 실현을 위해서는 남한과 아시아 대륙, 유럽을 잇는 연결고리인 북한의 협력이 필수적이다. 북한은 2013년 3월 31일 경제 건설과 핵무력 건설 병진노선을 채택하고 경제개발구 개발을 통한 경제 활성화 전략을 최우선 과제로 추진하고 있다. 본 논문은 남북 간 개발협력을 통한 북한지역 경제개발사업 추진을 목표로 남한 투자자의 시각에서 북한이 2013년에 개방한 13개 지방급 경제개발구를 대상으로 입지적, 경제적, 법률적 측면의 투자 잠재력을 평가하고 경제개발구에 대한 개발방향을 제시한다. 투자 잠재력 평가 결과 송림, 현동, 흥남, 청진, 와우도 경제개발구의 투자 잠재력이 높게 나왔다.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.455-461
• /
• 2005

This study was designed to investigate the fundamental aspects of a possible recovery of phosphorus strategy from wastewater by using the zirconium mesoporous structured materials as a new type of ion exchangers. Zirconium mesoporous structure material was synthesized by hydro-thermal synthesis. The synthesized zirconium mesoporous structure was examined by X-ray diffraction (XRD) and Transmission electron micrograph (TEM). From the results of XRD and TEM, it was found out that hexagonal mesoporous structure, pore size was about $47{\AA}$, was synthesized. Experimental results showed that the complex of zirconium sulfate tetrahydrate and surfactant micelles had very high ability for capture of phosphorus. The amount of phosphate ions exchanged into the solid was as great as 3.4mmol/g-ZS. And the ion exchange reaction was occurred between $PO_4{^{3-}}$ and $SO_4{^{2-}}$ and also between $PO_4{^{3-}}$ and $OH^-$. Therefore, it is possible to get the higher removal efficiency than other ion exchange media and adsorbent.

• 천문학회보
• /
• 제40권1호
• /
• pp.61.3-62
• /
• 2015

Remote-sensing observation is one of the observation methods that provide valuable information, such as composition and surface physical conditions of solar system objects. The Hayabusa spacecraft succeeded in the first sample returning from a near-Earth asteroid, (25143) Itokawa. It has established a ground truth technique to connect between ordinary chondrite meteorites and S-type asteroids. One of the scientific observation instruments that Hayabusa carried, Asteroid Multi-band Imaging Camera(AMICA) has seven optical-near infrared filters (ul, b, v, w, x, p, and zs), taking more than 1400 images of Itokawa during the rendezvous phase. The reflectance of planetary body can provide valuable information of the surface properties, such as the optical aspect of asteroid surface at near zero phase angle (i.e. Sun-asteroid-observer's angle is nearly zero), light scattering on the surface, and surface roughness. However, only little information of the phase angle dependences of the reflectance of the asteroid is known so far. In this study, we investigated the phase angle dependences of Itokawa's surface to understand the surface properties in the solar phase angle of $0^{\circ}-40^{\circ}$ using AMICA images. About 700 images at the Hayabusa rendezvous phase were used for this study. In addition, we compared our result with those of several photometry models, Minnaert model, Lommel-Seeliger model, and Hapke model. At this conference, we focus on the AMICA's v-band data to compare with previous ground-based observation researches.

• 한국패류학회지
• /
• 제29권4호
• /
• pp.291-301
• /
• 2013

This study researched and compared the sedimentation environment and photosynthetic pigments at Gomso (GS) -bay, Yoja (YJ) -bay and KangJin (KJ) -bay in May, 2012. It was shown that KJ-bay consist of C (clay) and M (mud), and GS-bay consists of Zs (silty sand) and Sz (sandy silt). Averagely, IL of YJ-bay was 4.98%, KJ-bay 6.10%, and GS-bay 1.45%. As for COD concentration, there were no places that exceeded Japanese sediment contamination standard 20 mg/g-dry. As for AVS concentration, in case of KJ-bay, two places exceeded Japanese sediment contamination standard 0.2 mg/g-dry. If we look into the average C/N ratio of bays, YJ-bay showed 8.50, KJ-bay 6.60, and GS-bay 5.52, thus all of them showed the characteristic of oceanic origin. As for the plankton make-up classified by photosynthetic pigments, diatom was dominant, and both ratios of pigment and C/chlorophyll. a showed the relatively lower distribution at GS-bay than at KJ-bay and YJ-bay. It is judged that this is related to the characteristic of flow-in, and it implies that predation process and decomposition by organic matters actively occurs at YJ-bay and KJ-bay.

• 천문학회보
• /
• 제43권1호
• /
• pp.73.2-73.2
• /
• 2018

The Hayabusa remote-sensing images of near-Earth asteroid (25143) Itokawa exhibited large diversity in spectral properties. The evidence suggests a various degrees of space weathering on the surface. It is known that the space weathering changes the spectra of S-type asteroids redder and reduces the depths of absorption around $1{\mu}m$. It is therefore possible to determine the surface ages through the investigation of the degree of space weathering. It is, however, reported that the scattered light components severely degrade the Asteroid Multiband Imaging Camera (AMICA) images, especially at the wavelengths > $0.86{\mu}m$. Our team came up with a technique for subtracting the scattered light components (Ishiguro 2014). Here, we upgraded the techniqu e by applying simplex algorism to correct the artifacts for all AMICA bands. This new technique enables to apply for the longest channel (i.e., zs-band at $1.01{\mu}m$) images, which was not studied so far. With the AMICA all bands data, we estimated the surface ages at the different location to be 0.6-2 Myr. Based on this data together with the geological information (e.g. gravitational potentials and local). we will discuss about the evolution of surface materials on the asteroid.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2661-2668
• /
• 2021

Gamma radiation shielding features for three series of binary alloys identified as (Pb-Sn), (Pb-Zn), and (Zn-Sn) have been investigated. The mass attenuation coefficients (µ/ρ) for the selected alloys were simulated using the MCNP-5 code in the energy range between 0.01 and 15 MeV. Moreover, the (µ/ρ) values were computed using WinXCOM database in the same energy range to validate the simulation results. Results reveal a good agreement between the simulated and computed values. The half value layer (HVL), mean free path (MFP), effective atomic number (Z_eff) and exposure buildup factor (EBF) were evaluated for the selected binary alloys. Results showed that the PS1, PZ1, and ZS2 alloys have the best shielding parameters and better than the commercially standard and available radiation shielding materials. Therefore, the investigated alloys can be used as effective radiation shielding materials against gamma ray with energies between 0.01 and 15 MeV.

• 식품보건융합연구
• /
• 제8권2호
• /
• pp.1-6
• /
• 2022

Purpose: This study aims to examine the opportunities in the food industry in the context of non-fungible tokens (NFTs) and the metaverse. The metaverse expands offline experiences into a virtual space and provides users with the advantage of overcoming the limitations of physical space. Research design, data and methodology: With the development of various contents based on advanced technology, the metaverse is becoming popular among the MZ generation (comprising millennials and Gen Zs), who are skilled at navigating digital platforms. Moreover, the previously entertainment game focused service has expanded to the business field after COVID-19; activities on the metaverse are now making space for economic value creation. I examined the recent global trends in the context of NFTs and the metaverse as well as the existing cases in Korea. Results: Globally, gaming and performance platforms such as Roblox, Fortnite etc. are still concentrated in the entertainment industry. However, as shown by ZEPETO and ifland in Korea there are many opportunities in the retail and food industries. Conclusions: We analyzed the ecosystems of the retail and food and beverage sectors, where the metaverse will be useful in the future, and have suggested the implications of the opportunities provided by the metaverse.

• 대한치과기공학회지
• /
• 제34권1호
• /
• pp.11-21
• /
• 2012

Purpose: Densification and mechanical properties of dental zirconia ceramics were evaluated by different sintering methods. Materials and Methods: Y-TZP zirconia block(Kavo $Everest^{(R)}$ ZS blank, Kavo dental GmbH, Bismarckring, Germany) was used in this study. Sintering were performed in heat sintering furnace and microwave sintering furnace, and then experimented and analyzed on a change in densification according to the sintering time, a change in densification according to thickness, flexural strength and micro-structure in zirconia specimens. Results: Microwave sintering was very effective in considerable mechanical properties such as flexural strength and bulk density was drastically increased than conventional electric heating method. It is also shown that microwave sintering time was faster and more economical than common method to be present in qualities which equal or exceed. Conclusion: It will be important to seek the accurate sintering condition of dental zirconia by microwave sintering method and the continuous research is necessary for the study of relationship between sintering methods and mechanical properties.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.81-87
• /
• 2010

PURPOSE. The purpose of this study was to compare the linear sintering behavior of presintered zirconia blocks of various densities. The mechanical properties of the resulting sintered zirconia blocks were then analyzed. MATERIALS AND METHODS. Three experimental groups of dental zirconia blocks, with a different presintering density each, were designed in the present study. Kavo $Everest^{(R)}$ ZS blanks (Kavo, Biberach, Germany) were used as a control group. The experimental group blocks were fabricated from commercial yttria-stabilized tetragonal zirconia powder (KZ-3YF (SD) Type A, KCM. Corporation, Nagoya, Japan). The biaxial flexural strengths, microhardnesses, and microstructures of the sintered blocks were then investigated. The linear sintering shrinkages of blocks were calculated and compared. RESULTS. Despite their different presintered densities, the sintered blocks of the control and experimental groups showed similar mechanical properties. However, the sintered block had different linear sintering shrinkage rate depending on the density of the presintered block. As the density of the presintered block increased, the linear sintering shrinkage decreased. In the experimental blocks, the three sectioned pieces of each block showed the different linear shrinkage depending on the area. The tops of the experimental blocks showed the lowest linear sintering shrinkage, whereas the bottoms of the experimental blocks showed the highest linear sintering shrinkage. CONCLUSION. Within the limitations of this study, the density difference of the presintered zirconia block did not affect the mechanical properties of the sintered zirconia block, but affected the linear sintering shrinkage of the zirconia block.