• 한국디지털건축인테리어학회논문집
• /
• 제10권1호
• /
• pp.65-74
• /
• 2010

This study has been given careful consideration to an induction of the mixed-use districts for the efficiency of Land Use, the rational plot planning and the mixture/complex among the functions in order to complement the zoning plan with the primary purpose to purify the usage of landscape. Furthermore, it is aimed to indicate the implementations through the medium of the in-depth analysis about the cardinal factors such as the standards on the regional location, building size and building uses in the case of designating the Mixed-use districts.Abstract This study has been examined by the aspect of scope for securing the adequacy of Site Division Restriction, Floor Area Ratio, Building Coverage Ratio and Outdoor Area Ratio in the "Mixed-Use Districts" and especially, by the medium of the in-depth analysis about the actual condition of building and outdoor space scales. It has been deduced the scale standards by using the simulation and correlation analysis among the factors of those buildings and outdoor spaces. Moreover, it has been applied the analysis method of using the building scale, especially, the latter has analyzed the total 1,656 different types classified by 3 patterns of Plottage and Building Coverage Ratio, 9 patterns of the factor change on Outdoor Area Ratio and 8 different patterns of road width.

• Steel and Composite Structures
• /
• 제2권6호
• /
• pp.441-460
• /
• 2002

In the design of bridges, it is important to consider the thermal stresses induced by the non-linear temperature distribution as well as the variation of effective temperature in the bridge deck. To cope with this, design temperature profiles are provided by design codes, which are normally based on extensive research work. This paper presents the results of a comprehensive investigation on the thermal behaviour of bridges in Hong Kong with special emphasis on composite bridges. The temperature distribution in bridges depends primarily on the solar radiation, ambient air temperature and wind speed in the vicinity. Apart from data of the meteorological factors, good estimates of the thermal properties of material and the film coefficients are necessary for the prediction of temperature distribution. The design temperature profiles for various types of composite bridge deck with bituminous surfacing and concrete slab of different thicknesses are proposed. The factors affecting the design effective temperature are also reviewed and suitable values for Hong Kong are proposed. Results are compared with recommendations of the current local code. The method facilitates the development of site-specific temperature profiles for code documents, and it can also be applied to create zoning maps for temperature loading for large countries where there are great climatic differences.

• Nuclear Engineering and Technology
• /
• 제47권6호
• /
• pp.776-790
• /
• 2015

Background: The advanced spent fuel conditioning process facility (ACPF) of the irradiated materials examination facility (IMEF) at the Korea Atomic Energy Research Institute (KAERI) has been renovated to implement a lab scale electrolytic reduction process for pyroprocessing. The interior and exterior structures of the ACPF hot cell have been modified under the current renovation project for the experimentation of the electrolytic reduction process using spent nuclear fuel. The most important aspect of this renovation was the installation of the argon compartment within the hot cell. Method: For the design and system implementation of the argon compartment system, a full-scale mock-up test and a three-dimensional (3D) simulation test were conducted in advance. The remodeling and repairing of the process cell (M8a), the maintenance cell (M8b), the isolation room, and their utilities were also planned through this simulation to accommodate the designed argon compartment system. Results and conclusion: Based on the considered refurbishment workflow, previous equipment in the M8 cell, including vessels and pipes, were removed and disposed of successfully after a zoning smear survey and decontamination, and new equipment with advanced functions and specifications were installed in the hot cell. Finally, the operating area and isolation room were also refurbished to meet the requirements of the improved hot cell facility.

• 한국BIM학회 논문집
• /
• 제10권3호
• /
• pp.22-32
• /
• 2020

Apartment building site planning is one of time consuming and labor-intensive tasks in architectural design field, due to its complexity in zoning regulations, building codes, local restrictions, and site-specific conditions. In other words, the process can be seen as a very complicated mathematical function with layers of variables and parameters, which ironically can be automated using computational methods on parametric tools. In this paper, a practical method of automating site planning of an apartment complex has been proposed by utilizing parametric approaches in Rhino 3D and Grasshopper. Two primary parameters, building heights and positions, determine the efficacy of building layouts under all regulatory standards, thus testing out numerous combinations of the two will produce some successful layout alternatives. For this, equation solver has been used for iterating the parametric model to sort out meaningful results among others. It also has been proven that the proposed process significantly reduced the time in site planning down to less than an hour on most cases, and many successful alternatives could be obtained by using multiple computers. Post evaluation processes such as day light and view shed analysis helped sort out the best performing ones out of functioning alternatives.

• 한국BIM학회 논문집
• /
• 제11권4호
• /
• pp.42-52
• /
• 2021

Paneling building facades is one of the essential procedures in building construction. Traditionally, it has been an easy task of simply projecting paneling patterns drawn in drawing boards onto 3d building facades. However, as many organic or curved building shapes are designed and constructed in modern architectural practices, the traditional one-to-one projection is becoming obsolete for the building types of the kind. That is primarily because of the geometrical discrepancies between 2d drawing boards and 3d curved building surfaces. In addition, curved compound surfaces are often utilized to accommodate the complicated spatial programs, building codes, and zoning regulations or to achieve harmonious geometrical relationships with neighboring buildings in highly developed urban contexts. The use of the compound surface apparently makes the traditional paneling pattern projection more challenging. Various mapping technics have been introduced to deal with the inabilities of the projection methods for curved facades. The mapping methods translate geometries on a 2d surface into a 3d building façade at the same topological locations rather than relying on Euclidean or Affine projection. However, due to the intrinsic differences of the planar 2d and curved 3d surfaces, the mapping often comes with noticeable distortions of the paneling patterns. Thus, this paper proposes a practical method of drawing paneling patterns directly on a curved compound surface utilizing Geodesic, which is faithful to any curved surface, to minimize unnecessary distortions.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.221-225
• /
• 2015

To hoist construction workers to their working space is directly related to the productivity of building construction since hoisting tasks are carried out during the working time. In order to reduce hoisting time in the condition that the number of construction lift-cars is limited, various types of the lift-cars group operation plans such as zoning and sky-lobby have been applied. However, previous researches on them cannot be compared in the performance due to their methodological limitation, discrete-event simulation methods, and cannot be find better solution to increase the performance. Therefore, this research proposed the simulation-based optimization model combining the agent-based simulation method to the scatter search optimization methods. Using the proposed model, this paper carried out the comparison analysis on the performance of typical operation plans and also optimize an operation plans by controlling the service range of lift-cars, the size and number of service zones. In this case study, it is verified that better alternatives than typical operation plans can be exists and it is possible to increase the productivity of building construction.

• 환경영향평가
• /
• 제22권1호
• /
• pp.65-78
• /
• 2013

Since pursuing the pleasant life for people, there is an increase of desire to appreciate outstanding scenery with the difference in certain level for perception and understanding of human on landscaping, However, the quality of landscaping has become artificial with the pleasance to be declining due to the urbanization. This study was applied at the site around High One Resort area in Gohan-eup, Jeongseon-gun Gangwon-do for analyzing the areas sensitive to the landscaping change as well as degree of requirement for landscape management for forest landscape management with the focus on presenting the zoning method and the management class classification method. Even if the forest is the same, the function of it is different depending on land use or what resource is placed that the forestry function is found out to present the management plan for each forestry function in the subject site and the result of the management grade classification is analyzed in overlapping to the forestry function level. As a result, from the landscaping management requirement and visual absorption analysis, the result formulated for upper, middle and lower zones to classify the final forestry landscape management degree into 1-4 grades and the management plan is presented on the respective 1-4 grade area for each forestry function. By applying the technique to set the management grade, it was possible to formulate the result to provide the means for integrated management in consideration of the forestry function and management of forestry landscape and resources.

• 한국ITS학회 논문지
• /
• 제23권2호
• /
• pp.50-68
• /
• 2024

본 연구의 목적은 버스노선의 설계 및 운영 단계에서 노선조정 활용을 위한 버스노선 스케치 방법론(Bus Route Sketch, BRS)을 개발하고, 그 적용 가능성을 제시하는데 있다. BRS 방법론은 버스 서비스의 공급자와 이용자를 모두 만족할 수 있는 버스노선 경로를 설계하기 위해 (1)적정 교통존의 설정, (2)설정된 교통존과 경로조합 방법론을 이용한 버스 운행경로 조합의 생성, 그리고 (3)노선버스 서비스 공급자와 이용자 측면의 다중 평가지표를 이용한 대안 운행경로의 평가와 순위결정으로 구성된다. 제시한 방법론을 적용한 결과, 공급자 관점에서 평가점수는 8.83에서 9.50으로 향상되고 이용자 관점에서 평가점수는 7.13에서 9.89까지 향상되는 바람직한 결과를 도출하였다. 본 BRS 방법론은 노선 계획 및 운영과정에 적합하도록 설계 및 개발되었기 때문에 운영 중인 버스노선의 평가와 조정 그리고 노선설계의 실무에서 활용이 가능할 것으로 기대된다.

• 대한지리학회지
• /
• 제43권6호
• /
• pp.914-937
• /
• 2008

본 논문에서는 지금까지 대부분의 지방재정 논의가 중앙정부를 중심축으로 하는 지방재정의 재정분권과 형평화 효과를 중심으로 이루어지고 있다고 보고 대안적으로 수도권과 비수도권의 상생발전을 위한 수평적 형평화 기금 조성방안을 제시한다. 먼저 지역 간 재정기반의 불균등을 분석하고, 형평화 기금 조성을 위한 부동산관련 조세적 방법, 개발이익 및 개발부담금 등을 활용하는 비조세적 방법, 공동세 방법, 수도권 규제조정 및 용도지역 변경에 따른 이익활용방법을 분석한다. 마지막으로 형평화 기금의 운용을 위한 사회적 협약과 계약이론에 기반 하는 거버넌스 전략을 제시한다.

• 건축역사연구
• /
• 제3권2호
• /
• pp.29-46
• /
• 1994

The KAMYOUNG is the supreme local government office in CHOSEON dynasty. This study aims to propose the new methodology on research of local government office's prototype in CHOSEON dynasty. Especially this study is the zoning plan of the KAMYOUNG in the late CHOSEON dynasty, It is meant to present the first trial that pursue to total frame of local government in CHOSEON dynasty through the new methodology. The 18th century is the transitional era when the system of norm was deconstructed. The institution and organization of the supreme lacal government office(KAMYOUNG) was united nationwidely and at the same time its deconstruction was carried out in the 18th century. The domain of the governer has fixed in the 18th century, though the scale of 街e KAMYOUNG was enlarged. These domain expressed a strong symbolization according to hierarchy in exterior appearance of the traditional architecture. With the entire execution of a local government coming soon, the concerns about the localization have been increased rapidly. Under this time situation, as the discussion centered on the creation or change of the local self-governing community, so the concerns regarding the traditional aspects of a local government office have been increasing. Hower, without the recognition of this history, as the research of these existing historical materials has been progressed, so the misunderstanding is still left. Especially, because the government office of CHOSEON is a Confucian nation thinking much of a hierarchy based on Yae - Jae, the hierarchy of this architecture has a deep correlation with the organization of an office. The method of this study is like following: Firstly, prescribed characteristic of KAMYOUNG tough syudys of hierarchy in a local government system, human and material composition. secondly, as the changing progress of KAMYOUNG is compared and analyzed with organization of an office in the center. So characteristics of KAMYOUNG are abstracted. And finally, from this, the interpretation methodology of KAMYOUNG is revealed, with a deep correlation between specific characters of organization and architectural structurals. And also, with these methodologies, the interpretation method of the local government office and normative frame in CHOSEON dynasty are suggested.