• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.415-431
• /
• 2010

Station-area development need transportation system and efficiency of public transit operation. but it had a great difficulty in developing by lack of profitability station-area because the excessive public contributions, and increase of land usage, a lot of tallege. Recently station-area development accelerated by the new law has been overridden and more efficient transport system configuration stations, possible of urban regeneration. The purpose of this study is to successful promotion of the urban Planning by Unit-Station-area development, the optimal method of financing, changeable of zoning to the development of high density.

• Nuclear Engineering and Technology
• /
• v.29 no.4
• /
• pp.299-309
• /
• 1997

The neutronic feasibility of typical Korean three-loop 900MWe class PWR core loaded with mixed oxide fuels for both annual and 18-month cycle strategies has been investigated as a means for spent fuel management. For this study, a method of determining equivalent plutonium content was developed under the equivalence concept which gives the same cycle length as uranium fuel. Optimal plutonium zoning within the MOX assembly was also designed with the aim of minimizing the peak md power. Conceptual core designs hate hen developed for equilibrium cycle with the following variations: annual and 18-month cycle, 1/3 and full MOX loading schemes, and typical and high moderation lattice. The analysis of key core physics parameters shows that in all cases considered satisfactory core designs seem to be feasible, though addition of control rod system and change in Technical Specification for soluble boron concentration are required for full MOX loading in order to meet the current design requirements.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.93-101
• /
• 1997

The purpose of this paper is to study the using method of the satellite image processing and GIS(Geographic Information System) map-algebra for the sustainable (land-use) plan. The research has been made by the two kinds of approaching steps. The first one is to allocate the sustainable zoning which is applicable to the environmental and the legal restriction elements base on space structure. The second one is to make a more sustainable plan through the extension of analysis range and the inclusion of analyzed environmental impacts within the plan making processes.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.14-21
• /
• 1998

Landscape has two side, ecological structure and visual characteristics. And Landscape evaluation should be implemented from this viewpoint. In this study, landscape of the Moodeungsan natural park was evaluated based on ecological and visual characteristics, and the results was compared with the existing zoning. And it was recognized that the areas having high preserbability are located in the nature environmental zone. For the purpose of natural park management planning, in this study, rezoning method of natural park based on landscape evaluation is proposed.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.106-113
• /
• 2012

A study on techniques to evaluate auditorium assignment visible efficiency using three-dimensional simulation. The most important thing to be considered is to ensure the visibility to the podium upon assigning auditorium of venues, classrooms or seminar rooms. However, since there are so many variables to be considered such as the form of the stage, the area and height of the stage, size of screen, and the distance and angle of the auditorium from the podium, the methods to assign auditorium are staying at the level of basic for a long time. Thus, in this study, we proposed simulation methodology to quantitatively evaluate the three-dimensional visible efficiency based on Visual Graph Analysis (VGA) theory. After analytical methodology manufactures application, it sets examples of visibility depending on location of screen, visibility depending on degree of height difference and visibility about three-dimensional Mass Zoning like a stage and verifies the efficacy. In addition, based on results, visibility expectation curve is drawn and the method to calculate the stepped height depending on necessary visibility is proposed.

• Steel and Composite Structures
• /
• v.47 no.4
• /
• pp.451-454
• /
• 2023

Landslides are one of the natural disasters that cause a lot of financial and human losses every year It will be all over the world. China, especially. The Mainland China can be divided into 12 zones, including 4 high susceptibility zones, 7 medium susceptibility zones and 1 low susceptibility zone, according to landslide proneness. Climate and physiography are always at risk of landslides. The purpose of this research is to prepare a landslide hazard map using the Hierarchical Analysis Process method. In the GIS environment, it is in a part of China watershed. In order to prepare a landslide hazard map, first with Field studies, a distribution map of landslides in the area and then a map of factors affecting landslides were prepared. In the next stage, the factors are prioritized using expert opinion and hierarchical analysis process and nine factors including height, slope, slope direction, geological units, land use, distance from Waterway, distance from the road, distance from the fault and rainfall map were selected as effective factors. Then Landslide risk zoning in the region was done using the hierarchical analysis process model. The results showed that the three factors of geological units, distance from the road and slope are the most important have had an effect on the occurrence of landslides in the region, while the two factors of fault and rainfall have the least effect The landslide occurred in the region.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.277-292
• /
• 2017

The development impact fee (DIF) zoning is a very beneficial public tool to provide the pre-planned urban infrastructures in those areas where significant urban sprawl had already taken place. In order to guarantee its benefit, however, it is required to designate the zone boundaries accurately and consistently. This study, in this context, tries to test the validity of the 50m-grid suggested in the official DIF manual, and to compare an alternative Hot Spot Analysis tool with the existing Spatial Aggregation method in configuring the zone boundaries. The results indicate that, unlike the case of population growth rate, current 50m grid size could not be much adequate in the case of using the development-permit increase rate to configure the primary DIF zones. Also, the optimal grid sizes seem to differ in the cases of Spatial Aggregation and Hot Spot Analysis. Further extended studies, in this regard, seem necessary to check the validity of the existing grid-size criteria as well as the boundary configuration methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.50-56
• /
• 2017

The perimeter structure in high-rise buildings, which plays a major role in resisting lateral forces, is generally formed by the orthogonal placement of the beam and column, but currently various grid patterns are implemented. In a previous study, the adaptability of the $IsoTruss^{(R)}$ grid (ITG) as a perimeter structure was examined. In this study, a method of estimating the required cross sectional area of a member in a preliminary design is proposed. The members of the perimeter structure are placed in three planes, perpendicular (PPR), parallel (PPL) and oblique (POQ) to the lateral loading, and the stiffness of the members in the POQ was taken into account by projecting them onto the PPL or PPR. Three models are established for member size zoning through the height of the building, in order to investigate the effect of the shear and moment in the calculation of the required cross sectional area. To examine the effectiveness of this study, a 64-story building is designed and analyzed. The effect of the member size zoning was examined by comparing the maximum lateral displacement, required steel amount, and axial strength ratio of the columns. Judging from the maximum lateral displacement, which was 97.3% of the allowable limit, the proposed formula seems to be implemental in sizing the members of an ITG structure at the initial stage of member selection.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.491-496
• /
• 2009

Recently, the high-rise building has been constructed competitively because it is symbol of the national competitive power including the technical power. The higher buildings are getting, the more important building mechanical systems are. So, the building mechanical systems are getting developed. Among the building mechanical systems, the sanitary system is basically necessary in order to maintain the building hygienically along with convenience and safety. This study has been investigated for various cases of high-rise building plumbing system. As a result, a variety of zoning method has been applied to most skyscrapers depending on the building height in the building mechanical system. And a variety of joint have been applied to minimize the Shortening and Sway. Also, the drainage in same uses has been discharged outside of a build through the one vertical pipe line. And airing system has been used like Individual Vent Pipe Yoke Vent Pipe Stack Vent Pipe Loop Vent Pipe Relief Vent Pipe method. It is sure that this study could be used as the high-rise building design.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.4
• /
• pp.51-58
• /
• 2014

This study is to clarify the actual condition of the plan of high schools in the rural area. Recently, many high schools are remodeling the buildings and facilities based on departmental system. This study, through analyzing on 5 remodeling cases of high school in gyeongnam area. This article discuses about the basic characteristics of the plan composition and the education program of 5 high schools. This study is showing the variation before and after remodeling and space organization types. The results of this study are summarized as follows; We studied 5 high schools in 2012~2013 of them, which located in the rural area. We studied the location of department classrooms, teachers' labs and home bases of them. 1) Most of them take horizontal zoning system in the department classrooms. 2) The number of teachers' labs were increased in most of floors. On the other hand, most of Labs' area were decreased. Every department classroom zone has one teachers' lab. 3) Sample schools took much more spaces of home-base and media-space than before.