• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.3
• /
• pp.217-226
• /
• 2003

This study is focused on the finding out load transfer mechanism in the ground near the tunnel during tunnel excavation in the jointed sandy ground. Laboratory model tests were performed on various cases of the overburden heights above tunnel crown, location, and degree of discontinuity planes. For model tests, a movable plate was installed in the midst of the bottom of sandy ground. This plate, moving downwards, was intended to model the stress relaxation during tunnel excavation. The load transfer was measured at the fixed separated bottom plates adjacent to the movable plate. As the result, the loosening zone and the load-transfer form around the tunnelling site were affected by the overburden height and the characteristics of discontinuous planes. And large loosening zone was developed along the discontinuous planes which were close to the tunnel.

• Journal of the Korean Society of Safety
• /
• v.5 no.3
• /
• pp.33-38
• /
• 1990

In this study, the transient temperature distribution of welded zone was analyzed by Finite Element Method for the optimal design of weldment. This study was carried out for the steel plate 8mm thick, 100mm wide, 100mm long that butt weld. The weld was made with a heat input of 2,250 joule/cm(arc current ： 180 amperes ； arc voltage ：25 volts ； and arc travel steed ： 0.28 cm/sec). In the analysis of temperature, cooling in the welded zone by the conduction between materal was almost completed at 600 sec when a unique temperature field was formed. after this, the material was gradually cooled by the heat transfer to the circumference. In the early phase the temperature in base metal zone is little changed. but after the rise in temperature the whole area is cooled gradually.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.28-34
• /
• 2022

We study through computational simulation the focal performance of an infrared (IR) Fresnel lens, composed of a multilayer-graphene zone plate formed under a graphene electrode. Here the Fermi level E_F of the patterned multilayer graphene is adjusted by the overlying graphene electrode. The Fresnel lens effect, with respect to the reflectance contrast between the graphene electrode and the 8-layer graphene zone plate placed on a glass substrate, has been analyzed over a broad wavelength range from 4 to 30 ㎛. As the optimal wavelength of 8 ㎛ (considering the reflectance and the reflectance-contrast ratio) is incident upon the Fresnel lens with a focal length of 240 ㎛, the focal intensity is enhanced by a factor of 4.3 as the E_F of multilayer graphene increases from 0.4 eV to 1.6 eV, and is improved by a factor of 5.8 as the number of graphene layers increases from two to eight. As a result, an all-graphene-based IR Fresnel zone-plate lens, exhibiting multifocal function (240 ㎛ and 360 ㎛) according to the selected E_F, is proposed as an ultrathin lens platform.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1977.10a
• /
• pp.195.1-195
• /
• 1977

Cellulase 분비 균주인 Trichoderma viride의 cellulase 생산능력이 높은 변이주를 선별, 분러하기 위하여 cellulose 기질이 첨가된 Plate상에서 작은 단일 colony를 형성시키고 분비된 cellulase가 배지내의 cellulase를 분해하여 생긴 clear zone을 육안으로 관찰함로써 cellulase생성 조절변이주 혹은 효소역가가 높은 균주를 식별할 수 있는 방법을 개발하였다.(중략)

• Journal of the Korean Dietetic Association
• /
• v.23 no.2
• /
• pp.180-191
• /
• 2017

The purpose of this study was to identity the probability of cross-contamination from the environment. For this, we examined foodservices at 20 universities/colleges for microbiological analysis of their working facilities and environment as well as their preventive equipment against cross-contamination. Seventy percent of the 20 foodservices were found to maintain one unified working area, which suggests high probability of contamination of food/utensils/equipment in the cooking area by pre-preparation or dish washing. According to the microbiological analysis, the hygiene acceptance ratio of working facilities in the clean zone was 70%, which was higher than the average 45% hygiene acceptance ratio of working facilities in the contamination operating zone. There was a significant difference in the total plate count (P<0.001) and coliform count (P<0.01), which demonstrates that work tables in the clean zone were in a good state compared to those in the contamination operating zone. In the contamination operating zone, refrigerator shelves had a high probability of cross-contamination. Regarding the floor surface and airborne microbes, cooking areas which should be maintained as clean zones had higher cross-contamination probability than those in the contamination operating zone. So corrective actions such as cleaning and sanitizing, keeping dry floors, lowered temperature and humidity, shoe disinfecting facilities, and checking concentrations, are necessary to manage floor surfaces and airborne microbes in the cooking area.

• Computers and Concrete
• /
• v.21 no.1
• /
• pp.75-85
• /
• 2018

To improve the design equation for the evaluation of the bursting force in the post-tensioned anchorage zone, this paper presents the analyses and design of the post-tensioned (PT) anchorage zone on the basis of three dimensional (3D) finite element (FE) analyses. The structural behavior was investigated through linear elastic finite element analyses upon consideration of the change in design parameters such as the bearing plate size, the eccentricity, and the tendon inclination. Moreover, consideration of the duct hole, which causes an increase of the bursting stress with a change in its distribution along the anchorage zone as well, is emphasized. Since that an exact prediction of the bursting force is the primary interest in design practice, additional parametric analyses are carried out to evaluate the relative contribution of all design parameters in determining the bursting force, and a comparison with the design guidelines mentioned in AASHTO-LRFD has been provided. Finally, an improved design guideline that takes into account the influence by the duct hole is suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.12
• /
• pp.1017-1021
• /
• 2015

Induction heating has been applied to the preheating process in various industrial fields. It has been used as a simple device structure, limiting the heating zone through controlled variables, and free-welding positions. It would be helpful to weld thick plates with arc welding such as GMAW. The induction heating process is well suited to this process. In this study, in order to find suitable induction heating parameters, a simulation was conducted with multi physics S/W. Three kinds of material were heated by induction coils designed specially for thick plate. Consequently, steel and nimonic alloy were the most efficient materials for preheating by induction. It can be concluded that the induction heating process is a good method for preheating the thick plate.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.590-597
• /
• 2007

The portion of thin plate is expected to increases as to the development of design and fabrication technology. The weld-induced deformation is more serious in thin plates than in thick plates because heat affect zone of thin plates is wider than that of thick plates, and in addition internal and external constraints much more influence upon weld-induced deformation of thin plates. This paper is aimed at applying the mechanical tensioning method to fillet weld of thin plates to reduce the weld-induced deformation. For this purpose, fillet welding tests have been carried out for several thin plate specimens with varying plate thickness and magnitude of tensile load. From the present study, it has been found that the tensioning method is effective on reduction of weld-induced deformation.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.91-96
• /
• 1999

The problems of welding distortion in a welded structures are major concern in heavy industry. Weld-induced angular distortion's formula, composed weld parameter such as heat input and plate thickness, is developed analytically by the use of an elliptic cylindrical inclusion with an eigenstrain in an infinite laminated plate theory. The source of angular distortion in weldments is the plastic strains, which are caused by non-uniform temperature gradient. The distributions of the plastic strain corresponding eigenstrain are assumed by the use of Rosenthal's solution expressing thermal history. Comparison of calculated results with experimental data shows the accuracy and validity of the proposed method.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.121-145
• /
• 2008

The purposes of this study were to identify the misconceptions that students have on the magma and plate tectonics and to present the implications in developing textbooks as well as related curriculum of high school textbooks. Data were collected through questionnaire, consisting of some questions, short essays, and descriptive drawings, developed by the research team. A total of 140 high school students(9th graders) responded to those questionnaires and were interviewed for further information. It was reported that participants displayed various misconceptions related to magma and plate tectonics. The identified misconceptions are as follows: For the definition of magma, the 31% of participants misunderstood magma as lava. In respect to the generative mechanism of magma at subduction zone, over 90% of students responded that it is generated by frictional heat. The source of misconceptions were identified as a result from textbooks and related reference-books. For the concept of plates, 87% of students conceived 'crust or a lower part of the plates' as 'plates'. Most participants hold the right concept of oceanic ridge, whereas, 66% of them considered 'rift valley' as either 'divergence of continental plates' or 'converging boundary'. 63% of them defined 'collision boundary of continental plate' as either 'subduction zone' or 'diverging boundary'. For the definitions of the trench and Benioff zone, 86% of students responded them as the place of subduction or differing density between two converging plates. The students' misconceptions were resulted from the errors and insufficient explanation, inappropriate figures, and data presented in textbooks, reference-books, lecture, and web sites. The results of this study are implied to contribute the improvement of students' misconceptions.