• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.374-379
• /
• 1994

This paper deals with the problem of plate separation and anchorage at the ends of steel plates strengthened by EBSP. Test results show that the reinforced concrete beams strengthened by EBSP occurs the premature failure without the beams achieving their full flexural strength at the end of plates. The premature failure is the cause of stress concentrations in the adhesive layer of plate, reinforced concrete incase of lack of plate length. Then a simple, approximate procedure for predicting the shear and normal stress concentrations is investigated by Robert's the ory based on partial interaction theory. The theoretical results are compared, and show close agreement with test results. A method is derived for determining the plate length that prevents the premature anchorage zone failure

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.1
• /
• pp.66-76
• /
• 2017

This paper is concerned with investigating the plastic material properties of steel plate formed by line heating method, and is aimed at implementing more rational design considering the accidental limit states such as collision or grounding. For the present study, line heating test for marine grade steel plate has been carried out with varying plate thickness and heating speed, and then microscopic examination and tensile test have been carried out. From the microscopic, it is found that the grain refined zones like ferrite and pearlite are formed all around the heat affected zone. From the tensile test results, it is seen that yield strength, tensile strength, fracture strain, hardening exponent and strength coefficient vary with plate thickness and heat input quantity. The formulae relating the material properties and heat input parameter should be, therefore, derived for the design purpose considering the accidental impact loading. This paper ends with describing the extension of the present study.

• Korean Journal of Veterinary Service
• /
• v.20 no.2
• /
• pp.161-168
• /
• 1997

This study was undertaken to determined the sulfamethazine residues In urine, serum and muscle of slaughtered pigs(n: 230) by the method of TLC, EEC-4-plate and HPLC. 1. Inhibition diameter characteristics of reference bacterial substance by EEC-4-plate method and antibacterial inhibition zone was appeared sulfonamides in BS pH 7.2 2. Residual sulfamethazine was detceted from 7 serum(3.04%) and 10 urine(4.35%) by TLC test and concentration of residues was higher In urine than serum. 3. Residual sulfamethazine was detected from 9 muscle(3.91%) by EEC-4-plate method. 4. Positive samples by TLC test and EEC-4-plate method were exceed 0.1ppm quantitative analysis from 7 muscle(3.04%).

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• Applied Microscopy
• /
• v.26 no.2
• /
• pp.197-206
• /
• 1996

cis-Dichlorodiammineplatinum (II) (cis-Platin) inhibits the proliferation and growth of the tumor cells by way of inhibiting DNA and protein synthesis of the cancer cells. Although cis-Platin is very effective antitumor drug, it also produces many other side effects. Thus the author has studied the effects of cis-Platin on the proximal epiphyseal plate in the tibia of the rat. The results were as follows: In the chondrocyte of the proliferative zone, sacculated, and fragmented cisternae of rough endoplasmic reticulum, some mitochondria with disorganized mitochondrial cristae and distorted procollagens were observed, and in the matrix some large matrix granules and dispersed collagen fibrils were revealed on the 1st, 3rd day and 1st week group of cis-Platin treated rats. In the chondrocyte of the proliferative zone of cis-Platin treated rats on the 2nd and 3rd week group, parallely arranged rough endoplasmic reticulum and many procollagens were shown, and in the matrix a number of large matrix granules and many small matrical granules as well as collagen fibrils were revealed. Consequently it is suggested that though cis-Platin induces the degenerative changes of the chondrocyte resulting in components of the cartilagenous matrix, these toxic effects are regressed with time.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1151-1153
• /
• 1999

3-layer polysilicon 표면미세가공공정을 이용하여 micro zone plate 렌즈와 미러 및 이를 구동하기 위한 구동기를 일체화시킨 마이크로 구동형 광학소자를 설계, 제작하였다. 650nm의 파장대역에서 초점거리가 $500{\mu}m$가 되도록 마이크로 zone plate 렌즈를 설계하였으며, 렌즈의 광학축은 실리콘 기판 상에서 $121{\mu}m$거리에 위치하도록 제작하였다. 마이크로 hinge와 스프링 latch 및 측면지지 plate를 이용하여 마이크로 렌즈와 미러가 실리콘 기판상에서 out-of-plane동작이 가능하도록 하였다. 마이크로렌즈 초점거리의 가변을 위하여 6개의 SDA(Scratch Drive Actuator)어레이를 설계, 제작하였다. 또한 빔 반사를 위한 마이크로 미러를 설계하고 $45^{\circ}$ self-assembly를 위하여 마이크로 hinge와 SDA array를 제작하였다.

• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.39-50
• /
• 2022

Layer separation (delamination) is an essential threat to fiber-reinforced polymer (FRP) plates under dynamic, static, and fatigue loads. Under compressive load, the growth of delamination will lead to structural instability. The aim of this paper is to present a method using shape memory alloy (SMA) stitches to suppress the delamination growth in a FRP plate and to improve the buckling behavior of the plate with a rectangular hole. The present paper is divided into two parts. Firstly, a closed-form (CF) formulation for evaluating the buckling load of the FRP plate is presented. Secondly, the finite element method (FEM) will be employed to calculate the buckling loads of the plates which serves to validate the results obtained from the closed-form method. The novelty of this work is the development of the closed-form solution using the p-Ritz energy approach regarding the stress-dependent phase transformation of SMA to trace the equilibrium path. For the FEM, the Lagoudas constitutive model of the SMA material is implemented in FORTRAN programming language using a user material subroutines (VUMAT). The model is simulated in ABAQUS/Explicit solver due to the nature of the loading type. The cohesive zone model (CZM) is applied to simulate the delamination growth.

• Ocean and Polar Research
• /
• v.27 no.1
• /
• pp.35-44
• /
• 2005

The bathymetric and gravity data were obtained in 2001 and 2003 during a survey of seamounts in the northwest of the Marshall Islands, western Pacific. The study areas are located in the Pigafetta Basin which is the oldest part of the Pacific plate and in the Ogasawara Fracture Zone which formed from the spreading ridge between the Izanagi and Pacific plates in the Jurassic. The densities of seamounts and the elastic thickness values of the lithosphere are calculated by using three-dimensional flexure modeling considering the constant sediment layer in the infinite plate model. Very low elastic thickness values (5km), relatively young seamounts, and old lithosphere in the east study area suggest the possibility of the rejuvenation of lithosphere by widespread volcanisms, whereas the elastic thickness values (15km), relatively old seamounts, and young lithosphere of the west study area are suitable for a simple cooling plate model of $300-600^{\circ}C$ isotherm. The gravity residuals of OSM6-1 and OSM6-2 suggest the possibility of different load density or elastic thickness. Relatively older OSM6-2 formed on the younger lithosphere with relatively thin elastic thickness, while younger OSM6-1 on the older lithosphere with relatively thick elastic thickness.

• Proceedings of the KSEG Conference
• /
• 2005.04a
• /
• pp.101-106
• /
• 2005

The three-dimensional Tomography developed by Kim and Bae(2004) was applied to 64,024 P and 64,618 S wave arrival times observed at 238 seismic stations for 4050 local earthquakes in the depth range from 0 to 300 km in and around Hokkaido, Japan. High and low velocity zones for Vp/Vs were clearly imaged in and around Hokkaido. The upper seismic planes of the double seismic zone (DSZ) were found in the subducted Pacific Plate beneath Hokkaido at depth of 40- 80 km, which produced high seismicity around Hokkaido. The findings of high Vp/Vs anomalies beneath the Moho discontinuity supports an evidence of a surface triple-collision hypothesis prepared by Moriya(1994) that the Kuril Arc(Okhotsk Plate or North American Plate) is colliding against the NE Japanese Arc(Amurian Plate or Eurasian Plate), along and beneath the Hidaka Mountain Range, and at the same time the Pacific Plate is subducting into these two plates, making an equilibrium of tectonic forces along the Hikada Mountain Range (HMR) corner and the central tectonic axis(142 ~ 143E) in Hokkaido. The low Vp and Vs were also found in east and west along the central tectonic axis in which the focal mechanism represents the extensional forces. These phenomena are also consistent with low Bouguer gravity anomalies in this region. It is understood why most of great earthquakes occurred outside Hokkaido where the balance of tectonic forces are breaking from the triple junction of three tectonic forces in Hokkaido.

• The Journal of Korean Medicine
• /
• v.33 no.2
• /
• pp.1-10
• /
• 2012

Objectives: This study was aimed to investigate the effect of Bojungikgitang-gagambang (BJIG) on longitudinal bone growth in rats. Methods: The BJIG treated group (300 mg/kg) and the control group (vehicle) were administered orally twice daily for 4 days. To investigate the effects of BJIG we measured body weight gain. The bone growth effect was analyzed by measuring between fluorescent lines marked with tetracycline, which plays the role of fluorescent dye on the surface of the tibia. Tetracycline was intraperitoneally injected. The height of growth plates in the epiphyseal plate was measured. The expression of bone morphogenetic protein-2 (BMP-2) and insuline-like growth factor-1 (IGF-1) was investigated by immunohistochemistry. Results: BJIG caused a significant acceleration of longitudinal bone growth of $349.7{\pm}15.9{\mu}m/day$ compared to control ($319.8{\pm}21.4{\mu}m/day$). The height of overall growth plate was not significantly more compared to the control, but the size of cells in the proliferative zone and hypertrophic zone were. In the immunohistochemistry, BMP-2 and IGF-1 were expressed markedly in the proliferative or hypertrophic zone, respectively. Conclusions: BJIG stimulated the chondrocyte hypertrophy and chondrogenesis in the growth plate and directly increased the longitudinal tibia length of rats.