• 한국균학회지
• /
• 제24권1호통권76호
• /
• pp.49-55
• /
• 1996

살충성진균 Metarhizium anisopliae가 시들음병을 일으키는 Fusarium oxysporum, 잿빛곰팡이 병을 일으키는 Botrytis cinerea, 겹둥근무늬병을 일으키는 Alternaria solani 등에 대하여 항진균활성을 갖는지 알아보았다. 그 결과 Plate상에서 균사생장저해 실험과 inhibition rate실험을 했을 때 항진균활성이 검정되었으며 또한 YPD배지에서 배양된 M. anisopliae로부터 얻은 배양여액을 식물병원균에 30%농도로 첨가했을 때 이들의 포자발아율은 B. cinerea, F. oxysporum에서 각각 21.5%(control: 88.2%), 53.0%(control: 78.6%)로 감소하였으며 발아개시 시간도 8시간 정도 지연되었다. 또한 현미경을 통한 미세구조관찰에서는 10% 배양여액을 첨가했을 때 F. oxysporum의 균사로부터 후막포자가 생성되고 생장저해가 일어나는 것이 확인되었다. 이상의 결과로부터 M. anisopliae의 항진균활성은 fungistatic effect를 나타냄을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제12권4호
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• 한국미생물·생명공학회지
• /
• 제33권2호
• /
• pp.112-116
• /
• 2005

스웨덴 산림지역의 토양시료로부터 분리한 Bacillus licheniformis KMU-3의 작물병원성 곰팡이에 대한 항진균 활성 및 항진균물질의 생산조건에 대하여 검토했다. B. licheniformis KMU-3은 Rhizoctonia solani KACC 40101에 대하여 높은 항진균활성을 나타냈었다. 항진균물질 생산을 위한 최적배양조건은 탄소원으로 $1.0\%$ sodium acetate, 질소원으로는 $1.0\%$ ammonium sulfate, $24^{\circ}C$, pH 8.0, 180 rpm, 24시간 진탕배양하였을 때 가장 높은 항진균활성를 나타내었다. TLC상에서 Rf값이 0.49인 밴드에 나타난 물질에서 항진균활성이 확인되었으며, 이물질은 Rhizoctonia solani AG-4 KACC 40142, Colletotrichum orbiculare KACC 40808, Colletotrichum gloeosporioides KACC 40804, Cladosporium cucumerinum KACC 40576, Fusarium graminearum KACC 41040, Fusarium oxysporum KACC 40052에 대하여서도 높은 항진균활성을 나타내었다.

• 대한조선학회지
• /
• 제26권1호
• /
• pp.24-38
• /
• 1989

본 논문에서는 초기부정을 가진 판이 최종강도에 도달하기까지 나타내는 탄소성대변형 거동을 해석하기 위하여 새로운 간이 유한요소법을 개발한다. 본 논문에서 개발하는 유한요소는 4개의 절점만을 가진 4각형 plane-shell요소로서 면외 뿐만 아니라 면내의 대변형거동에 의한 기하학적 비선형성의 효과도 고려한다. 또한, 요소의 소성거동에 대한 취급은 소성절점법을 적용하여 판두께방향의 소성영역의 확산을 일일히 고려하는 대신에 판두께방향의 중앙부에 생성되는 소성절점에 집약시켜 나타내는 방법으로 단순화하며, 그 결과, 요소의 탄소성 강성행렬은 판두께방향의 수치적분을 수행할 필요없이 간단한 행렬연산만으로 얻어지기 때문에 기존의 유한요소법에 비해 상당한 수치계산 시간의 절약이 예상된다. 본 논문에서 정식화한 해석이론을 바탕으로 컴퓨터 프로그램을 개발하고, 해석예를 통하여 기존의 유한요소법등에 의한 해석결과와 비교하여 본 논문에서 정식화한 해석이론 및 컴퓨터 프로그램의 정도와 유용성을 확인한다.

• 한국균학회지
• /
• 제39권2호
• /
• pp.126-130
• /
• 2011

작물의 생육촉진 및 식물 진균병의 생물방제능을 동시에 나타내는 다기능성 미생물제제를 개발하고자 토양으로부터 분리하여 보관중인 세균 120종의 활성을 검토하였다. 그 중 siderophore를 생성하고 항진균 활성을 보이는 BS11-1, BS11-2, BS11-3를 선발하였다. 이들 균주는 cellulase, protease 같은 lytic enzyme을 생산하였으며 식물성장 촉진 호르몬중의 하나인 IAA를 생성하였다. 이들 선발균들에 의한 식물 생장 촉진을 조사한 결과, BS11-1, BS11-2, BS11-3 균 배양액 관주 시 고추 유묘의 생육을 132%, 122%, 120% 증가 시켰으며, BS11-1, BS11-2 균주의 경우 뿌리의 신장 및 생육이 촉진되었음을 확인 할 수 있었다.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• 태양에너지
• /
• 제19권3호
• /
• pp.29-41
• /
• 1999

본 연구에서는 돌출된 단일 모듈이 부착된 수직 채널내의 3차원 자연대류 특성을 실험적으로 조사하였으며, 특히 모듈로부터 대류에 의한 열에너지 제거에 초점을 두었다. 채널내의 유동장은 smoke-method를 이용하여 가시화 하였다. 또한 채널내부, 수직벽면 및 모듈표면의 국소온도를 열전대와 열플럭스 센서를 이용하여 측정하여 복사와 전도에의한 열손실량을 계산하였다. 실험결과 대류열전달은 모듈 하부의 모서리 부근에서 가장 활발히 일어나고, 모듈 상부에서의 재순환영역은 열전달을 감소시킴을 알 수 있으며 임계 채널간격비를 예측할 수 있는 상관식을 레일리히수의 함수로 구하였다. 또한 $8.28{\times}10^3<Ra^*_c<3.48{\times}10^6$의 범위에서 수정 채널 레일리히수의 함수로써 평균 누셀트수와의 상관식을 구하였다.

• Restorative Dentistry and Endodontics
• /
• 제41권4호
• /
• pp.278-282
• /
• 2016

Objectives: Glass ionomer cements (GICs), which are biocompatible and adhesive to the tooth surface, are widely used nowadays for tooth restoration. They inhibit the demineralization and promote the remineralization of the tooth structure adjacent to the restoration, as well as interfere with bacterial growth. Hence, the present study was conducted to assess and compare the antimicrobial activity of three commercially available GICs against two cariogenic bacteria. Materials and Methods: An agar plate diffusion test was used for evaluating the antimicrobial effect of three different GICs (Fuji IX, Ketac Molar, and d-tech) on Streptococcus mutans (S. mutans) and Lactobacillus acidophilus (L. acidophilus). Thirty plates were prepared and divided into two groups. The first group was inoculated with S. mutans, and the second group was inoculated with L. acidophilus. These plates were then incubated at $37^{\circ}C$ for 24 hours. Zones of bacterial growth inhibition that formed around each well were recorded in millimeters (mm). Results: The zones of inhibition for Fuji IX, Ketac Molar, and d-tech on S. mutans were found to be $10.84{\pm}0.22mm$, $10.23{\pm}0.15mm$, and $15.65{\pm}0.31mm$, respectively, whereas those for L. acidophilus were found to be $10.43{\pm}0.12mm$, $10.16{\pm}0.11mm$, and $15.57{\pm}0.13mm$, respectively. Conclusions: D-tech cement performed better in terms of the zone of bacterial inhibition against the two test bacteria, than the other two tested glass ionomers.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.1-12
• /
• 1996

In lots of application to heat exchanger systems, closed two-phase thermosyphons are tilted from a horizontal. If the tilt angle, especially, is less than 30$^{\circ}$, the operational performances of thermosyphon are highly dependent on tilt angle. The present study was conducted to better understand such operational behaviors as mech-anni는 of phase change, and flow patterns inside a tilted thermosyphon. For experiment, an ethanol thermosyphon with a 35% of fill charge rate was designed and manufactured, using a copper tube with a diameter 19mm and a length 1500mm. Through a series of test, the tilt angle was kept constant at each of 4 different values in the range 10~25deg. and the heat supply to the evaporator was stepwisely increased up to 30㎾/$m^2$. When a steady state was established to the thermosyphon for each step of thermal loads, the wall temperature distribution and vapor temperature at the condenser were measured. The wall temperature distributions demonstrated a formation of dry patch in the top end zone of the evaporator, with a values of temperature 20~4$0^{\circ}C$ higher than the wetted surface for a moderate heat flux q≒20㎾/$m^2$. Inspite of the presence of hot dry patch, however, the mean values of boiling heat transfer coefficient at the evaporator wall were still in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine the total thermal resistance of a tilted thermosyphon. The correlation formula showed a good agreement with the experimental data within 20%.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1741-1751
• /
• 2004

It is commonly requested that the steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criterion is known to be too conservative for some locations and types of defects and its application is limited to a single crack in spite of the fact that the occurrence of multiple through-wall cracks is more common in general. The objective of this research is to propose the optimum failure prediction models for two adjacent through-wall cracks in steam generator tubes. The conservatism of the present plugging criteria was reviewed using the existing failure prediction models for a single crack, and six new failure prediction models for multiple through-wall cracks have been introduced. Then, in order to determine the optimum ones among these new local or global failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two adjacent through-wall cracks in thin plate were carried out. Thereby, the reaction force model, plastic zone contact model and COD (Crack-Opening Displacement) base model were selected as the optimum ones for assessment of steam generator tubes with multiple through-wall cracks. The selected optimum failure prediction models, finally, were used to estimate the coalescence pressure of two adjacent through-wall cracks in steam generator tubes.