• Journal of Microbiology and Biotechnology
• /
• v.23 no.10
• /
• pp.1347-1356
• /
• 2013

Tricholoma matsutake, an ectomycorrhiza that has mutual relationships with the rootlet of Pinus denisflora, forms a fruiting body that serves as a valuable food in Asia. However, the artificial culture of this fungus has not been successful. Soil fungi, including T. matsutake, coexist with many other microorganisms and plants; therefore, complex microbial communities have an influence on the fruiting body formation of T. matsutake. Here, we report on the structures of fungal communities associated with the fairy ring of T. matsutake through the pyrosequencing method. Soil samples were collected inside the fairy ring zone, in the fairy ring zone, and outside the fairy ring zone. A total of 37,125 sequencing reads were obtained and 728 to 1,962 operational taxonomic units (OTUs) were observed in the sampling zones. The fairy ring zone had the lowest OTUs and the lowest fungal diversity of all sampling zones. The number of OTUs and fungal taxa inside and outside the fairy ring zone was, respectively, about 2 times and 1.5 times higher than the fairy ring. Taxonomic analysis showed that each sampling zone has different fungal communities. In particular, out of 209 genera total, 6 genera in the fairy ring zone, such as Hemimycena, were uniquely present and 31 genera, such as Mycena, Boletopsis, and Repetophragma, were specifically absent. The results of metagenomic analysis based on the pyrosequencing indicate a decrease of fungal communities in the fairy ring zone and changes of fungal communities depending on the fairy ring growth of T. matsutake.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.519-525
• /
• 2008

For this study, SM45C steel rods using generally for power transmission shafts and machine components was selected and welded by butt-GMAW method. And then it was studied about estimation of fatigue strength and the region of infinite life by Haigh diagram using Goodman's equation. Fatigue strength in weld zone presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. This result agrees with distribution of hardness in weld zone. Fatigue strength in base metal zone presents highly compared with weld zone in low cycles between $10^4$ cycles and $10^6$cycles, but it presents the lowest fatigue strength on the order of heat affected zone in the vicinity of $10^6$cycles. It is the result that the first high compressive residual stress distributed by drawing process of the steel rods is released and the base metal is softened by alternating stresses. The region of infinite life by Haigh diagram presents highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. From this results, it is demanded that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected in the region of the lowest infinite life of heat affected zone.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.448-461
• /
• 2024

Purpose: The purpose of this study is to establish a life zone class suitable for Korean characteristics in the post-COVID-19 era and to classify the types for the installation and operation of living SOC facilities. Method: The concept of the life zone was established through policies and previous studies related to the life zone, and data in various fields such as population, employment, transportation, economy, and education were classified using the z-score technique. Result: Korea's life zones can be classified into metropolitan life zones, regional life zones, urban life zones, village life zones, and neighborhood life zones, and depending on their roles, they can be classified into central life zones, workplace-residential balanced life zones, residential life zones, industrial life zones, and low-density life zones. Conclusion: The results of this study show that proper life zone establishment and proper living SOC supply can prevent the decline of underdeveloped areas and contribute to balanced regional development

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.45-50
• /
• 2008

SM45C steel rods being used generally for power transmission shafts and machine components was selected and welded by Butt-GMAW(Gas Metal Arc Welding) method. An estimation of fatigue life was studied by constructing S-N curve. Fatigue strength of base metal zone showed higher values than one of weld zone in low cycles between $10^4$ and $10^6$cycles. However, significant decrease in fatigue strength of base metal was found around $10^6$cycles, which were almost same as one of heat affected zone. This decrease was attributed that initial residual stress of the steel rods distributed by drawing process was diminished by continually applied load, and resulted in softening of base metal. The fatigue limit of the weld zone was highest in the boundary between deposited metal zone and heat affected zone, and followed by in the order of deposited metal zone, base metal zone, and heat affected zone. Based on these results, it is revealed that the stress for safety design of machine components using SM45C butt-welded steel rods must be selected within the region of the lowest fatigue limit of heat affected zone.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.26-32
• /
• 2010

SM45C steel rods using generally for machine components were selected and welded by butt-GMA welding method for this study. And then they were studied about characteristics of fatigue behavior and fracture surfaces by rotary bending test. Fatigue strength in weld zone present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. The region of infinite life by Haigh diagram present highly in order of the boundary between deposited metal zone and heat affected zone, deposited metal zone, heat affected zone. Fatigue cracks in unnotched specimens of base metal and weld zone introduce simultaneously from extensive out-side of circumferential cross-section and propagate to the other side indicating beach markings and dimples according to consolidation of fatigue cracks. Fatigue cracks in all of notched specimens introduce simultaneously in out-side of circumferential cross-section by high stresses and propagate to center of it indicating beach markings.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.392-398
• /
• 2013

This study investigated the effect of test zone selection for evaluating bending strength of visually graded lumber. This will contribute to the understanding of two different methods under different standards. In method I, the major defect was randomly placed in the test specimen. In method II, the major defect was randomly placed in the maximum moment zone (MMZ). The results showed that the method II is more accurate for reflecting the effect of defects governing the grade of lumber. Unless the maximum strength-reducing defect (MSRD) is placed in MMZ, the evaluated value would be higher than that of MSRD. For evaluating the modulus of rupture (MOR) of visually graded lumber in test set-up of Method I, the Eq. (5) needs to be considered.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.16-22
• /
• 2012

The use of welding process has been increased for manufacture of machine, bridges, ships, gas facilities and so on together with development of welding technique. Accordingly, it has been needed to develop the welding methods considering higher productivity and safety design for manufacture of their welding structures. In this study, it was studied basically on characteristics of fatigue strength and fatigue life in full penetrated cruciform fillet weld zone in relation to material thickness, welding passes, loading direction and notch radius of toe zone. Most of fatigue failure occurred in toe zone of cruciform fillet weld joint. Fatigue strength and fatigue life are under the influence of stress concentration due to notch radius and flank angle of toe zone. The metal of toe zone annealed and diffused by multi-layer welding and acicular ferrite structure formed by the result improved fatigue strength and fatigue life.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2008

The experiment was investigated the effects of lower root zone temperature on shoot and root growth of 'Akihime' strawberries in aeroponics in cold season. Root growth was decreased with decrease of root zone temperature, especially in lateral roots. Elongation of main roots was highest in $18^{\circ}C$ of root zone temperature. Number of lateral roots and length of lateral roots were lowest in $8^{\circ}C$ of root zone temperature. Lower root zone temperature resulted significantly in decrease of fresh weight of root and shoot and leaf area of strawberry. But there were no significant statistical differences in shoot fresh weight and leaf area in $8^{\circ}C$ and $13^{\circ}C$ of root zone temperature. Leaf length, leaf width and number of leaves of strawberry were decreased in lower root zone temperature. The results of this experiment will be utilized in the winter season cultivation for strawberry in hydroponics.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.222-222
• /
• 2017

This study aimed to determine an optimal temperature of root zone for the chive cultivation in a greenhouse during the winter season that may raise the possibility of chive (Allium schoenoprasum L.) harvest any time year-round by reducing energy consumption. The maximum and minimum temperatures of root zone were 26.8 and $19.8^{\circ}C$ for the R-Z20, 28.3 and $23.6^{\circ}C$ for the R-Z25 and 22.4 and $14.3^{\circ}C$ for the control. The highest fresh weights of shoot and root, plant height, root length and stem diameter were observed in the R-Z20 treatment. There was no significant difference in the growth between the R-Z25 and control treatment. These results suggest that the optimal temperature of root zone is $20^{\circ}C$ for the chive cultivation in the greenhouse during winter season.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.14-19
• /
• 2012

There are insufficient data to consider the effect zone for the marine life of coastal fisheries, because no standard has been defined for the sound level of marine life. In this study, equations for distance attenuation were used to determine the effect zone for oceanic noises. A reference noise level was divided into 4 parts to consider the characteristics of the fishes, and the effect zone of each reference noise level was determined. To increase the reliability of the effect scope, approximately 100 repetitions of blasting work split into several parts by the boring depth, the sound level of the source caused by an increase in weight, and the effect zone were calculated using the prediction equation. According to the prediction, the maximum distance of the effect zone was 4.92 km.