• 한국결정학회지
• /
• 제4권2호
• /
• pp.92-99
• /
• 1993

Diethylzinc를 사용하여 PECVD장치로 ZnO 박막을 증 착하여 미세구조를 분석하였다. 기판 온도 100℃에서부터 이미 미세 결정 입자로 구성된 ZnO 박막의 증착이 가능했으며, 200℃이상에서는 C 축 배향성이 뛰어난 ZnO 박막이 유리 기판위에 증착되었다. c-면 사파이어 기판위에 증착된 ZnO 박막을 TEM으로 분석한 결과 기판 온도 350℃에서 EPITAXIAL (002) ZnO 박막이 성장됐으며, 입계에서는 Moire패턴에 의한 dislocation이 관찰되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.120-121
• /
• 2006

To investigate the ZnO thin films which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. Al sputtering process of ZnO thin films substrate temperature, work pressure respectively is $100^{\circ}C$ and 15 mTorr, and the purity of target is ZnO 5N. The ZnO thin films were in-situ annealed at $600^{\circ}C$, $800^{\circ}C$ in $O_2$ atmosphere. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5{\times}10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAS_2$. Those diffusion was perform at $650^{\circ}C$ during 3hr. We confirmed that p-type properties of ZnO thin films were concerned with dopant sources rather than diffusion temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.568-571
• /
• 2005

Highly transparent ZnO films with low resistivity for thin film solar cell applications were fabricated at low temperature by rf magnetron sputtering. Al-doped ZnO films were deposited on glass substrates at a substrate temperature of $200^{\circ}C$. electrical and optical properties of the ZnO:Al films were investigated in terms of the reparation conditions. The transmittance of the ZnO:Al films in the visible range is 90 %. The lowest resistivity of the ZnO:Al films is about $5.7\times10^{-4}$ $\Omega$ cm at the Al content of 2.5 wt% with the film thickness of 500 nm. After deposition, the smooth surface of ZnO:Al films were etched in diluted HCl (0.5%) to investigate the variation of electrical and surface morphology properties due to an textured surface.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.461-466
• /
• 2006

To investigate the ZnO thin films which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $100^{\circ}C$ and 15 mTorr, and the purity of target is ZnO 5 N. The ZnO thin films were in-situ annealed at $600^{\circ}C$ in $O_2$ atmosphere. The thickness of ZnO thin films has implemented about $1.6{\mu}m$ at SEM analysis after in-situ annealing process. We have investigated the crystal structure of substrates, and so structural properties of ZnO thin films has estimate by using XRD, FWHM, FE-SEM and AFM. XRD and FE-SEM showed that ZnO thin films grown on substrates had a c-axis preferential orientation in the [0001] crystal direction. XPS spectra showed that ZnO thin film was showed a peak positions corresponding to the O1s and the Zn2p. As form above XPS, we showed that the atom ratio of Zn:O related 1:1.1504 on ZnO thin film, so we could obtained useful information for p-type ZnO thin film.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.213-218
• /
• 2001

분무열분해법으로 유리기판 위에 ZnO와 ZnO:In 박막을 성장시켰다. 성장된 ZnO 박막은 hexagonal 구조를 이루고, 격자상수 a=3.242 $\AA$, c=5.237 $\AA$였고, (002) 방향으로 선택 성장되었다. In을 0~6.03 at. % 불순물로 첨가하여 성장시킨 ZnO:In박막은 ZnO 박막의 결정구조와 같고 격자상수가 약간 증가하였다. ZnO:In 박막의 금속 이온의 비는 분무용액의 금속 이온의 비와 거의 일치하였다. ZnO:In 박막의 최소 비저항과 최대 운반자 농도는 In를 2.76 at % 불순물로 첨가하여 성장시킨 경우였는데, 그 값은 각각 19.1 $\Omega\cdot\textrm{cm}$, $2.11\times10^{19}\textrm{cm}^{-3]$이었다. In를 3.93 at. % 불순물로 첨가하여 성장시킨 ZnO:In 박막 경우 400~800 nm 영역에서의 광투과율은 95% 이상이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.452-452
• /
• 2013

ZnO is one of the most attractive transparent conductive oxide (TCO) films because of low toxicity, a wide band gap material and relatively low cost. However, the electrical conductivity of un-doped ZnO is too high to use it as TCO films in practical application. To improve electrical properties of undoped ZnO, transition metal (TM) doped ZnO films such as Al doped ZnO or Ti doped ZnO have been extensively studied. Here, we prepared Ti doped ZnO thin films by atomic layer deposition (ALD) for the application of TCO films. ALD was used to prepare Ti-doped ZnO thin films due to its inherent merits such as large area uniformity, precise composition control in multicomponent thin films, and digital thickness controllability. Also, we demonstrated that ALD method can be utilized for fabricating highly ordered freestanding nanostructures of Ti-doped ZnO thin films by combining with BCP templates, which can potentially used in the photovoltaic applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.151-152
• /
• 2005

ZnO films were deposited on MgO substrates (ZnO/MgO) by ultrasonic spray pyrolysis. Substrate temperature varied from $250^{\circ}C$ to $350^{\circ}C$. The crystallographic properties and surface morphologies of the ZnO/MgO films were studied by X ray diffraction and scanning electron microscopy. The properties of photoluminescence (PL) for the films were investigated by dependence of PL spectra on the substrate temperature and the annealing temperature. The ZnO/MgO films prepared at $350^{\circ}C$ showed the strongest UV emission peak at 18 K and 300 K among the films in this study.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1113-1119
• /
• 2003

저온 박막 공정을 위해 비등점이 낮은 용매인 isopropanol을 사용하였고, 용질로 zinc acetate의 몰 농도를 0.3∼1.3 mol/l까지 변화시켜 sol을 합성하였다. Zn 농도 변화에 따른 ZnO 박막의 구조 및 광학, 전기적 특성을 분석하였다. XRD 측정에서 Zn의 농도가 0.7 mol/l 일 때 c-축으로 결정 배향성이 뚜렷하였다. SEM으로 박막의 표면 morphology를 관찰한 결과 0.7 mol/l 에서 균일한 표면층을 갖는 나노구조를 이루고 있었다. UV-vis. 측정을 통한 ZnO 박막의 광투과도는 Zn의 농도가 0.7 mol/l 이하에서 87%였으나, 1.0 mol/l 이상의 농도에서는 급격히 감소하였다. 이때 광 밴드갭 에너지는 3.07∼3.22 eV의 값을 나타내며, 벌크 ZnO의 특성과 유사하였다. 박막의 전기 비저항 값은 150 $\Omega$-cm로 Zn의 농도변화에 따라 큰 변화를 보이지 않았으며, I-V 특성분석에서 전형적인 ohmic contact 특성을 보였다.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.242-248
• /
• 2008

The structural, optical and electrical properties of ZnO films doped with 1.5 at% of 3A materials(B, Al, Ga, In) were studied by sol-gel process. The films were found to be c-axis (002) oriented hexagonal structure on glass substrate, when post heated at 500 $^{\circ}C$. The surface of the films showed a uniform and nano size microstructure and the crystalline size of doped films decreased. The lattice constants of ZnO:B/Al/Ga increased than that of ZnO, while ZnO:In decreased. All the films were highly transparent(above 90 %) in the visible region. The energy gaps of ZnO:B/Al/Ga were increased a little, but that of ZnO:In was not changed. The resistivities of ZnO:Al/Ga/In were less than 0.1 $\Omega$cm. All the films showed a semiconductor properties in the light or temperature, however ZnO:In was less sensitive to it. A figure of merit of ZnO:In had the highest value of 0.025 $\Omega^{-1}$ in all samples.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.769-774
• /
• 2006

In this paper the ZnO thin films, which has used spotlight of next generation short wavelength LEDs and semiconductor laser were deposited based on RF magnetron sputtering is described. The temperature at substrate and work pressure, which has implemented in sputtering process of ZnO thin films were settle down at $100^{\circ}C$ and 15 mTorr respectively. The ZnO 5N has used target. The thickness of ZnO thin films was about $1.6{\mu}m$ which was measured by SEM analysis after the sputtering process. Structural properties of ZnO thin films by in-situ and atmosphere annealing were analyzed by XRD. Transformation of grain size and surface roughness were observed by AFM. XPS spectra showed that ZnO thin film had a peak positions corresponding to the $Zn_{2p}$ and the $O_{1s}$. As form above XPS, we confirmed that post-annealing condition changed the atom ratio of Zn/O and microstructure in ZnO thin films.