• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.47-50
• /
• 2010

Various thicknesses of Al-doped ZnO (AZO) films were deposited on glass substrate using pulsed dc magnetron sputtering with a cylindrical target designed for large-area high-speed deposition. The structural, electrical, and optical properties of the films of various thicknesses were characterized. All deposited AZO films have (0002) preferred orientation with the c-axis perpendicular to the substrate. Crystal quality and surface morphology of the films changed according to the film thickness. The samples with higher surface roughness exhibited lower Hall mobility. Analysis of the measured data of the optical band gap and the carrier concentration revealed that there were no changes for all the film thicknesses. The optical transmittances were more than 85% regardless of film thickness within the visible wavelength region. The lowest resistivity, $4.13\times10^{-4}\Omega{\cdot}cm^{-1}$ was found in 750 nm films with an electron mobility $(\mu)$ of $10.6 cm^2V^{-1} s^{-1}$ and a carrier concentration (n) of $1.42\times10^{21} cm^{-3}$.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1995

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromaching techniques. The sensing material used to detect the offensive trimethylarnine ((CH$_{3}$)$_{3}$N) gas is 6 wt% $Al_{2}$O$_{3}$-doped, 1000.angs.-thick ZnO deposited by r. f. magnetron sputtering. The optimum operating temperature of the sensor is 350.deg.C and the corresponding heater power is about 85mW. Excellent thermal insulation is achieved by the use of a double-layer structure of 0.2.mu.m -thick silicon nitride and 1.4.mu.m-thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric pressure chemical vapor deposition(APCVD), respectively. The sensors are mechanically stable enough to endure at least 43, 200 heat cycles between room temperature and 350.deg. C.

• Korean Journal of Materials Research
• /
• v.13 no.6
• /
• pp.347-351
• /
• 2003

II-Ⅵ ZnO compound semiconductor thin films were grown on $\alpha$-Al$_2$O$_3$(0001) single crystal substrate by radical beam assisted molecular beam epitaxy and the optical properties were investigated. Zn(6N) was evaporated using Knudsen cell and O radical was assisted at the partial pressure of 1$\times$10$^{4}$ Torr and radical beam source of 250-450 W RF power. In $\theta$-2$\theta$ x-ray diffraction analysis, ZnO thin film with 500 nm thickness showed only ZnO(0002)and ZnO(0004) peaks is believed to be well grown along c-axis orientation. Photoluminescence (PL) measurement using He-Cd ($\lambda$=325 nm) laser is obtained in the temperature range of 9 K-300 K. At 9 K and 300 K, only near band edge (NBE) is observed and the FWHM's of PL peak of the ZnO deposited at 450 RF power are 45 meV and 145 meV respectively. From no observation of any weak deep level peak even at room temperature PL, the ZnO grains are regarded to contain very low defect density and impurity to cause the deep-level defects. The peak position of free exciton showed slightly red-shift as temperature was increased, and from this result the binding energy of free exciton can be experimentally determined as much as $58\pm$0.5 meV, which is very closed to that of ZnO bulk. By van der Pauw 4-point probe measurement, the grown ZnO is proved to be n-type with the electron concentration($n_{e}$ ) $1.69$\times$10^{18}$$cm^3$, mobility($\mu$) $-12.3\textrm{cm}^2$/Vㆍs, and resistivity($\rho$) 0.30 $\Omega$$\cdot$cm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.811-816
• /
• 2012

The effect of co-sputtering condition on the structural properties of $Mg_xZn_{1-x}O$ thin films grown by RF magnetron co-sputtering system was investigated for manufacturing ZnO/MgZnO structure LED. $Mg_xZn_{1-x}O$ thin films were grown with ZnO and MgO target varying RF power. Structural properties were investigated by X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The ZnO thin films have sufficient crystallinity on the high RF power. As RF power of ZnO target increased, the contents of MgO in the $Mg_xZn_{1-x}O$ film decreased. LED was manufactured using ZnO/MgZnO multi-layer on p-GaN/$Al_2O_3$ substrate. Threshold voltage of multi-layer LED was appeared at 8 V, and it was luminesced at wave length of 550 nm.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.127.2-127.2
• /
• 2011

본 연구에서는 RF Magnetron Sputtering System을 이용하여 ZnO계 투명전도막 증착시 Vaporization된 MeOH를 유입함으로써 박막증착과 동시에 표면의 Roughness를 제어하여 이에따른 전기적 특성 및 광학적 특성의 개선에 대하여 연구하였다. 실험방법으로 기존의 RF Magnetron Sputtering System에 Vaporization이 가능한 Ultrasonic을 이용하여 MeOH를 Vaporized시켜 MFC Controll을 통해 챔버에 유입하여 ZnO계 투명전도막의 박막증착과 동시에 표면 Texturing을 하였다. ZnO계 투명전도막의 박막증착시 Vaporized MeOH의 유입에 따른 광학적 특성변화를 UV-visible-nIR spectrometry로 조사하였으며, 전기적 특성 변화를 4-Point-Probe로 조사하였으며, 표면적 특성 변화를 Atomic Force Microscope(AFM), Scanning Electron Microscopy(SEM)를 조사하였으며, 박막의 결정성장특성 변화를 X-ray Diffraction(XRD)으로 조사하였으며, Vaporized MeOH 유입에 따른 박막의 성분분석을 Secondary Ion Mass Spectrometry (SIMS)로 조사함으로써 최적의 조건 및 공정을 확립하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.58.1-58.1
• /
• 2010

Stainless Steel의 유연한 기판을 사용하여 ZnO:Al/Ag의 후면전극에서 Ag 증착 실험조건 변화를 통해서 light trapping을 개선한 n-i-p 구조의 플렉서블 미세결정질 실리콘 박막 태양전지를 제작하였다. 실험 방법으로 마그네트론 스퍼터를 사용하여 Stainless Steel 기판 위에 ZnO:Al/Ag를 증착하여 후면전극으로 사용되는 back reflector를 제작하였으며 그 위에 미세결정질 실리콘 박막을 증착하였다. Back reflector에서 Ag 박막의 증착 온도가 증가할수록 표면결정 성장으로 roughness가 증가하여 반사도를 증가하였다. 또한, Ag 박막 증착 두께와 압력 변화에 따른 광학적 특성변화를 Atomic Force Microscope(AFM), Scanning Electron Microscopy(SEM),UV-visible-nIR spectrometry로 조사하여 최적의 조건을 찾았으며 개선된 back reflector의 특성이 n-i-p 구조의 플렉서블 미세결정질 실리콘 박막 태양전지에 적용하여 light trapping의 증가가 태양전지에서 광학적인 특성 변화 및 효율 향상에 영향을 주는지 Photo IV와 EQE(External Quantum Efficiency)를 통하여 조사하였다.

• Journal of the Korean Vacuum Society
• /
• v.11 no.1
• /
• pp.35-42
• /
• 2002

We fabricate thermally stable and low resistance Ru ohmic contacts to $n-ZnO:Al(3\times10^{18}\textrm{cm}^{-3})$, grown by specially designed dual target sputtering system. It is shown that the as-deposited Ru contact produces a specific contact resistance of $2.1{\times}10^{-3}{\Omega}\textrm{cm}^2$. Annealing of the Ru contacts leads to the improvement of current-voltage characteristics. For example, annealing of the contact at $700^{\circ}C$ for 1 min produces a contact resistance of $3.2{\times}10^{-5}}{\Omega}\textrm{cm}^2$. furthermore, the metallisation scheme is found to be thermally stable: the surface of the contact is fairly smooth with a rms roughness of 1.4 nm upon annealing at $700^{\circ}C$. These results strongly indicate that the Ru contact represents a suitable metallisation scheme for fabrication of high-performance ZnO-based optical devices and high-temperature devices. In addition, possible mechanisms are suggested to describe the annealing temperature dependence of the specific contact resistance.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.889-894
• /
• 2001

2wt% $Al_2O_3-doped$ ZnO (AZO) thin films were deposited on sapphire (0001) single crystal substrate by parellel type rf magnetron sputtering at 55$0^{\circ}C$. The as-grown AZO thin films was polycrystalline and showed only broad deep defect-level photoluminescence (PL). In order to examine the change of PL property, AZO thin films were annealed in $N_2$ (N-AZO) and $H_2$ (H-AZO) at the temperature of $600^{\circ}C$~$1000^{\circ}C$ through rapid thermal annealing. After annealed at $800^{\circ}C$, N-AZO shows near band edge emission (NBE) with very small deep-level emission, and then N-AZO annealed at $900^{\circ}C$ shows only sharp NBE with 219 meV FWHM. In Comparison with N-AZO, H-AZO exhibits very interesting PL features. After $600^{\circ}C$ annealing, deep defect-level emission was quire quenched and NBE around 382 nm (3.2 eV) was observed, which can be explained by the $H_2$passivation effect. At elevated temperature, two interesting peaks corresponding to violet (406 nm, 3.05 eV) and blue (436 nm, 2.84 eV) emission was firstly observed in AZO thin films. Moreover, peculiar PL peak around 694 nm (1.78 eV) is also firstly observed in all the H-AZO thin films and this is believed good evidence of hydrogenation of AZO. Based on defect-level scheme calculated by using the full potential linear muffin-tin orbital (FP-LMTO), the emission 3.2 eV, 3.05 eV, 3.84 eV and 1.78 eV of H-AZO are substantially deginated as exciton emission, transition from conduction band maximum to $V_{ Zn},$ from $Zn_i$, to valence band maximum $(V_{BM})$ and from $V_{o} to V_BM}$, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.315-322
• /
• 2002

A thin film oxide semiconductor micro gas sensor array which shows only 60㎽ of power consumption at an operating temperature of 30$0^{\circ}C$ has been fabricated using microfabrication and rnicrornachining techniques. Excellent thermal insulation of the membrane is achieved by the use of a double la! or structure of 0.1${\mu}{\textrm}{m}$ thick Si$_3$N$_4$ and 1${\mu}{\textrm}{m}$ thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric－pressure chemical-vapor deposition(APCVD), respectively. The sensor way consists of such thin film oxide semiconductor sensing materials as 1wt.％ Pd-doped SnO$_2$, 6wt.% AI$_2$O$_3$-doped ZnO, WO$_3$ and ZnO. The thin film oxide semiconductor micro gas sensor array exhibited resistance changes usable for subsequent data processing upon exposure to various gases and the sensitivity strongly depended on the sensing layer materials. Heater Part of the sensor structure has been modified in order to improve the process yield of the sensor, and as a result of modified heater structure improved process yield has been achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.2
• /
• pp.115-118
• /
• 2017

Highly photosensitive and wide bandgap amorphous silicon oxide (a-$SiO_x$:H) films were developed at low temperature ranges ($100{\sim}150^{\circ}C$) with employing plasma-enhanced chemical vapor deposition by optimizing $H_2/SiH_4$ gas ratio and $CO_2$ flow. Photosensitivity more than $10^5$ and wide bandgap (1.81~1.85 eV) properties were used for making the a-$SiO_x$:H thin film solar cells, which exhibited a high open circuit voltage of 0.987 V at the substrate temperature of $100^{\circ}C$. In addition, a power conversion efficiency of 6.87% for the cell could be improved up to 7.77% by employing a new n-type nc-$SiO_x$:H/ZnO:Al/Ag triple back-reflector that offers better short circuit currents in the thin film photovoltaic devices.