• Journal of Dairy Science and Biotechnology
• /
• 제33권4호
• /
• pp.271-275
• /
• 2015

Colloidal semiconductor CdSe-ZnS core-shell nanocrystal quantum dot (Qdot) are luminescent inorganic fluorophores that show potential to overcome some of the functional limitations encountered with organic dyes in fluorescence labeling applications. Salmonella Enteritidis has emerged as a major cause of human salmonellosis worldwide since the 1980s. A rapid, specific, and sensitive method for the detection of Salmonella Enteritidis was developed using Qdot as a fluorescence marker coupled with immunomagnetic separation. Magnetic beads coated with anti-Salmonella Enteritidis antibodies were employed to selectively capture the target bacteria, and biotin-conjugated anti-Salmonella antibodies were added to form sandwich immune complexes. After magnetic separation, the immune complexes were labeled with Qdot via biotin-streptavidin conjugation, and fluorescence measurement was carried out using a fluorescence measurement system. The detection limit of the Qdot method was a Salmonella Enteritidis concentration of $10^3$ colony-forming units (CFU)/mL, whereas the conventional fluorescein isothiocyanate-based method required over $10^5CFU/mL$. The total detection time was within 2 h. In addition to the potential for general nanotechnology development, these results suggest a new rapid detection method of various pathogenic bacteria from a complex food matrix.

• 환경위생공학
• /
• 제19권1호
• /
• pp.8-16
• /
• 2004

Ground water samples were collected from residential, green" industrial, landfill and mining area and analyzed for 23 inorganics from March to October in 2002. The results are as follows; 1. The detection frequencies of inorganic materials such as As, Ba, B, Mo, Ca, Mg, Al, Cu, Fe, Mn, Zn, Na, K were 7.2∼77.1% which showed that these inorganics were detected in many ground waters. 2. The detection frequencies of 7 inorganics(Cd, Cr, Ph, Se, Sb, Be, Tl) were commonly low at ranging from 0.42 to 2.5%. These inorganics were contained in ground water partially. 3. Three inorganics such as Hg, Ni, Ag were not detected in any ground-water samples. 4. Compared to the other areas, ground water samples from landfill area contained greater concentration in many inorgainics and then showed higher levels in industral, residential, mining and green area in order. 5. Compared to noted concentrations of bottled water, inorganic minerals including Ca, Mg, Na, K related to taste were fluent in target samples. The results showed that the average concentrations of Mg, Na, K were 4.0 mg/l, 14.7 mg/l, 1.5 mg/l respectively. 6. The concentrations of inorganics such as Sb, Ba, Mo, Be, Tl, K in some ground water samples exceeded the water quality standards of WHO, the US and UK. Especially, Ba, Mo, K also showed relatively high detection frequencies so these inorganics need to be considered as analytes in Korea Drinking Water Regulation in further study.

• Journal of Ecology and Environment
• /
• 제32권4호
• /
• pp.267-275
• /
• 2009

To investigate the possible applications of plants to remediate heavy-metal-contaminated soil, a pilot experiment was performed for four years in a reclaimed dredging area using two Alnus species, i.e., Alnus firma and Alnus hirsuta. In a comparison of phytomass of the two species at two different planting densities, the phytomass of Alnus planted at low density was twice as high as that of Alnus planted at high density after four years. The Alnus species showed active acclimation to the heavy-metal-contaminated soil in a reclaimed dredging area. A. hirsuta showed greater accumulation of phytomass than A. firma, indicating that it is the better candidate for the phytoremediation of heavy-metal-contaminated soils. In the pilot system, Alnus plants took metals up from the soil in the following order; Pb > Zn > Cu > Cr > As > Cd. Uptake rates of heavy metals per individual phytomass was higher for Alnus spp. planted at low density than those planted at high density in the pilot system. Low plant density resulted in higher heavy metal uptake per plant, but the total heavy metal concentration was not different for plants planted at low and high density, suggesting that the plant density effect might not be important with regard to total uptake by plants. The quantity of leached heavy metals below ground was far in excess of that taken up by plants, indicating that an alternative measurement is required for the removal of heavy metals that have leached into ground water and deeper soil. We conclude that Alnus species are potential candidates for phytoremediation of heavy-metal- contaminated surface soil in a reclaimed dredging area.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.312.1-312.1
• /
• 2014

Chalcopyrite계 화합물 반도체인 $Cu(InGa)Se_2$ (CIGS)는 직접천이형 에너지 밴드갭과 전파장 영역에 대하여 높은 광흡수계수($1{\times}$[10]^5/cm)를 가지므로 두께 $1{\sim}2{\mu}m$인 박막형태으로 고효율의 태양전지 제조가 가능하다. 또한, 박막공정의 저가 가능성을 나타내면서 전세계적으로 많은 연구와 관심을 받고 있고, 현재 상용화되어 있는 결정질실리콘 태양전지를 대체할만한 재료로 주목 받고 있다. 일반적으로, CIGS박막형 태양전지 구성은는 유리를 기판으로 하여 5개의 단위 박막인 Mo 후면전극, p형 반도체 CIGS 광흡수층, n형 반도체 CdS 버퍼층, doped-ZnO 상부 투명전극, $MgF_2$ 반사방지막으로 이루어진다. 이들 중에서 태양전지의 에너지 변환효율에 결정적인 영향을 미치는 구성된다. CIGS 광흡수층의 제조는 크게 진공법과 비진공방법으로 나뉜다. 현재까지 보고된 문헌에 따르면 CIGS 박막형 태양전지의 경우에 동시증발법으로 20.3%의 에너지 변환효율을 보였지만,는데, 이는 진공장비 특성상 공정단가가 높고 대면적화가 어렵다는 단점을 가진다. 따라서, 비진공법을 이용하여 광흡수층 제작하는 것이 기술적으로 진보할 여지가 크다고 볼 수 있다. 반면 현재 상용화되어 있는 결정질실리콘 태양전지를 대체할만한 방법으로 주목 받고 있는 비진공을 이용한 저가공정은 최근 15.5%의 에너지 변환효율이 보고 되었다. 비진공법에는 전계를 이용한 증착법 및 스프레이법으로 나뉘며, 이들 광흡수층 재료의 화학적 합성은 III족 원소인 In, Ga의 함량비에 따라 광흡수층의 에너지 밴드갭(1.04~1.5 eV) 조절이 가능하다. 따라서, 본 연구에서는 비진공법에 사용되는 CIGS재료의 화학적 합성조건을 변화시켜 III족 원소의 조성비 조절을 시도하였다. CIGS 분말 시료의 입자 형태와 크기를 FE-SEM을 이용하여 관찰하였고, 화합물의 성분비를 EDX 및 XRD 분석을 통해 Ga 함량에 따른 구조적 차이를 비교해 보았다.

• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.345-355
• /
• 2020

This study has been carried out to evaluate the leaching behavior of Tunisian phosphogypsum (PG) tailings in Skhira city (southern Tunisia). Two PG samples, including old and freshly deposited samples, were characterized in terms of physical, geotechnical, mechanical, chemical and mineralogical properties. Special attention was paid to their leaching behavior when subjected to standard leaching tests. Our results indicated that both samples are mainly composed of more than 31.85% CaO and 31.4% SO3, indicating the predominance of gypsum. This was further confirmed by XRD patterns that revealed the presence of characteristic reflections of gypsum, brushite, quartz and Maladrite. Compressive strength after 90 d exceeded 769 kPa, but still lower than that of natural sand (1,800 kPa). Leaching test was proposed as an appropriate method to determine the released contaminants from PG. The obtained results showed that Fluorine and Phosphorus are the most released elements from PG with 40 and 30%, respectively. The released Se, Cd, and Zn were the only trace elements that exceeded the threshold limits. It seemed that leached element concentrations were independent aging or particle size of the PG. Based on the assessment of leaching behavior, an integrated management approach of the PG deposits was proposed.

• 자원환경지질
• /
• 제29권6호
• /
• pp.725-732
• /
• 1996

To assess soil distribution patterns of heavy metals in agricultural environments, we have measured the concentrations of six metals from surficial soils of three different groups divided on the basis of the surrounding environment: (1) soil group I-cultivated soils within the purely agricultural regions, (2) soil group II-both cultivated and uncultivated soils near various livelihood facilities, and (3) soil group III-mainly cultivated soils near major polluting sources. The mean concentrations for the three soil groups were found in the range as follows: 0.12~0.15 (Cd), 4.94~6.08 (Pb), 0.05~0.11 (Hg), 2.82~3.50 (Cu), 4.69~7.82 (Zn), and 0.36~0.78 (As) ppm. Examination of data distribution trends indicates that the concentrations determined from the relatively unpolluted soil environs (groups I and II) were comparable not only between each other but also with those reported previously in background soil environs of Korea. The concentration data for the soil group III were however found to be much higher than the rest two groups. Unlike the direct comparison of the magnitudes of concentrations, results of a regression analysis exhibited much different patterns: it was seen that the correlation patterns for soil group I were rather analogous to those of soil group III. The similarities in correlation patterns between groups I and III along with the lack of correlations in soil group II suggest that soil characteristics such as whether being cultivated or not are important factors affecting soil distributions of heavy metals.

• 생태와환경
• /
• 제48권2호
• /
• pp.86-94
• /
• 2015

Chironomous is aquatic insect belonging to order Diptera, family Chironomidae. Their larval stage can be found mainly in aquatic benthic environment, hence good model organism to study environmental toxicology assessments and consider as useful bio indicators of contamination of the aquatic environment. In this study, Chironomus Heat Shock Proteins, Cytochrome 450, Glutathione S-transferase, Serine-type endopeptidase gene expressions were compared between polluted field areas (Chironomus plumosus) and under laboratory conditions (Chironomus riparious) to investigate molecular indicators for environmental contaminant stress assessment. Heavy metal (Al, Fe, Mn, Cu, Cr, Zn, Se, Pb, As, Cd) concentrations in sediments collected from three study areas exceeded the reference values. Moreover, HSPs, CYP450 and GST gene expression except SP for C. plumosus showed higher expression than C. riparious gene expression. Similar gene expression pattern was observed in C. riparious that exposed environment waters up to 96 h when compared to C. plumosus exposed to waters that grown in lab conditions. In summary, this comparative gene expression analysis in Chironomous between field and laboratory condition gave useful information to select candidate molecular indicators in heavy metal contaminations in the environment.

• 한국토양비료학회지
• /
• 제48권1호
• /
• pp.64-71
• /
• 2015

Soil contamination with arsenic and heavy metals is a worldwide problem. Main objective of this research was to evaluated effects of reducing heavy metal leaching under reduced soil condition amended with industrial by-products. The contaminated soil was amended with 3% (w/w) of limestone (Ls), steel slag (SS) and acid mine drainage sludge (AMDS). Synthetic acid rain ($H_2SO_4:HNO_3=6:4$, pH 5.5 fixed) was used for feeding solution with flow rate of $0.78{\sim}0.88mL\;min^{-1}$. Results showed that similar pH and EC of leachate was observed in all treatments regardless of applied industrial by-products. However, arsenic concentration of leachate increased when industrial by-products were mixed. Meanwhile, concentration of heavy metal in the leachate decreased from 11.3 to 4.59 mg for Cd, from 92.3 to 7.93 mg for Pb, and from 11,716 to 1,788 mg for Zn via immobilization in soil with AMDS amended, respectively. Overall, application of industrial by-products can be an environmentally-friendly way to remediate soil and(or) leachate contaminated with metal(loid)s in metal mine site.

• 한국전기전자재료학회논문지
• /
• 제32권5호
• /
• pp.393-398
• /
• 2019

A poly[bis(4-butypheny)-bis(phenyl)benzidine] (poly-TPD) and poly(9-vinylcarbazole) (PVK) bilayer was employed as a hole transport layer (HTL) in solution-processed CdSe/ZnS quantum dot light-emitting diodes (QLEDs). The thickness of the PVK layer spin-coated onto the poly-TPD layer, whose thickness was fixed to 40 nm, was varied, with PVK layer thicknesses of 0 nm, 35 nm, 45 nm, and 55 nm. Because the thickness of the PVK can determine the hole transport properties of the HTL, a PVK thickness that maximizes the performance of the HTL for the QLEDs was investigated. By employing the optimized PVK thickness of 45 nm, the current efficiency of the QLED exhibited a 1.74 times improvement when compared with that of the QLED with poly-TPD based HTL without PVK. This was mainly attributed to the decrease in the energy barrier between the HTL and the quantum dot (QD) emitting layer (EML).

• 한국패류학회지
• /
• 제22권2호
• /
• pp.157-165
• /
• 2006

바지락의 중금속의 농축 방식 및 해독기작을 연구하기 위해 소화선, 소화관 및 아가미등 세 기관을 선택하여 면역조직화학적 방법, 미세구조적 연구 그리고 SEM-EDS를 사용한 MT와 중금속의 분포 양상을 지역별로 채집한 샘플과 Cd-Cu에 시간별로 노출시킨 샘플에서 각각 살펴보았다. 중금속에 의해 유도된 MT 단백질이 면역조직화학적인 방법에 의해 붉은 색으로 표지되었다. 노출시간이 길어질수록 간췌장에서는 diverticula의 외곽으로 강한 반응을 보였으며, 아가미에서는 중금속의 노출시간이 길어질수록 노출되지 않은 조직에 비해 전반적으로 더 넓은 지역에서 강하게 반응을 보였다. 간췌장과 아가미를 투과전자현미경으로 관찰한 결과 중금속(Cd) 에 더 오래 노출될수록 세포질에서 inclusion body와 중금속으로 추정되는 과립들을 다수 관찰할 수 있었으며, 핵막이 swelling 되는 현상을 관찰할 수 있었다. 또한 발달된 조면 소포체와 미토콘드리아가 관찰되었다. SEM-EDS 결과 중금속의 분포 양상이 지역별로 상당히 상이한 결과를 나타났는데, 이는 지역별로 중금속의 오염정도와 오염원이 되는 중금속의 종류가 다르기 때문으로 추측된다. 그리고 지역별로 채집한 바지락을 이용한 실험과 S와 Zn의 수치가 높게 나타나는 것으로 보아 MT가 관여하고 있음을 간접적으로 확인할 수 있었다.