• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.172-173
• /
• 2005

The electronic state of ZnO doped with Y was calculated using the density functional theory. In this study, the program used for the calculation on theoretical structures of ZnO and doped ZnO was Vienna Ab-initio Simulation Package (VASP), which is a sort of pseudo potential method. The detail of electronic structure was obtained by the descrite variational $X\alpha$ (DV-$X\alpha$) method, which is a sort of molecular orbital full potential method. The optimized crystal structures obtained by calculations were compared to the measured structure. The density of state and energy levels of dopant elements was shown and discussed in association with optical properties.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2000

The new green $Al_3GdB_4O_{12}:Tb^{3+} and red Al_3GdB_4O_{12}:Eu_{3+}$ phosphors were synthesized and then characterized their optical properties for PDP application. And also the photoluminescence properties of these phosphors were compared with the commercial green $Zn_2SiO_4:Mn^{2+} and (Y,Gd)BO_3: Eu^{3+}$ red PDP phosphors. The phosphors were synthesized by solid state reaction at 115$0^{\circ}C$ for 4hr. It was found that the emitting brightness of $Al_3GdB_4O_{12}:Tb^{3+}$(15mol%) green phosphor under 147nm excitation was higher than that of commercial $Zn_2SiO_4: Mn^{2+}$ green PDP phosphor. However, the color coordinate of this new green phosphor was inferior to the commercial one. On the other hand, the emitting intensity of $Al_3GdB_4O_{12}:Eu^{3+}$(15mol%) red phosphor was smaller than the $commercial(Y,Gd)BO_3: Eu^{3+}$ red one, but the CIE coordinate was slightly improved. The excitation spectrum showed that $Al_3GdB_4O_{12}$ phosphors had a strong excitation band at $\lambda=160nm$ associated with the host absorption. And the photoluminance excitation (PLE) intensity in VUV range for $Al_3GdB_4O_{12}:Tb^{3+}$ green phosphor was higher than that of $Zn_2SiO_4: Mn^{2+}$, but the PLE intensity of $Al_3GdB_4O_{12}:Eu^{3+}$ red phosphor was smaller than $(Y,Gd)BO_3: Eu^{3+}$.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.636-639
• /
• 2010

ZnO thin films were prepared on a glass substrate by radio frequency (RF) magnetron sputtering without intentional substrate heating and then surfaces of the ZnO films were irradiated with intense electrons in vacuum condition to investigate the effect of electron bombardment on crystallization, surface roughness, morphology and hydrogen gas sensitivity. In XRD pattern, as deposited ZnO films show a higher ZnO (002) peak intensity. However, the peak intensity for ZnO (002) is decreased with increase of electron bombarding energy. Atomic force microscope images show that surface morphology is also dependent on electron bombarding energy. The surface roughness increases due to intense electron bombardment as high as 2.7 nm. The observed optical transmittance means that the films irradiated with intense electron beams at 900 eV show lower transmittance than the others due to their rough surfaces. In addition, ZnO films irradiated by the electron beam at 900 eV show higher hydrogen gas sensitivity than the films that were electron beam irradiated at 450 eV. From XRD pattern and atomic force microscope observations, it is supposed that intense electron bombardment promotes a rough surface due to the intense bombardments and increased gas sensitivity of ZnO films for hydrogen gas. These results suggest that ZnO films irradiated with intense electron beams are promising for practical high performance hydrogen gas sensors.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.270-275
• /
• 2021

ZnO was synthesized according to the transformation behavior and crystallization conditions of Zn-intermediate obtained by zinc sulfate as a precursor and NaOH, Na₂CO₃ as a alkali agents. For ZnO crystallization, Zn₄(OH)₆SO₄·H₂O and Zn₅(OH)₆(CO₃)₂·H₂O as a Zn-intermediate were calcined at 400℃ and 800℃ for 1 h, respectively, based on decomposition temperature from TGA. Zn₄(OH)₆SO₄·H₂O was confirmed to have mixed Zn₄(OH)₆SO₄·H₂O and ZnO at 400℃, and was completely thermally decomposed at 800℃ to form ZnO phase. The prepared Zn₅(OH)₆(CO₃)₂·H₂O as a Zn-intermediate by the reaction with Na₂CO₃ was transformed to a complete ZnO crystallization over 400℃. Nano-sized ZnO can be synthesized at a relatively lower calcination temperature through the reaction with Na₂CO₃.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.137-146
• /
• 2011

Vertically well-aligned ZnO nanowire (NW) arrays were synthesized directly on GaN/sapphire and Si substrate from Zn vapor deposition without catalysts. Experimental results showed that the number density, diameter, crystallinity and degree of the alignment of ZnO NWs depended strongly on both the substrate position and kind of the substrates used for the growth. The photoluminescence (PL) characteristics of the grown ZnO NW arrays exhibit a strong and sharp ultraviolet (UV) emission at 379 nm and a broad weak emission in the visible range, indicating that the obtained ZnO NWs have a high crystal quality with excellent optical properties. The as-grown ZnO NWs were characterized by using scanning electron microscopy (SEM), high resolution transmission electronic microscopy (HR-TEM), and X-ray diffraction (XRD).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.2
• /
• pp.81-86
• /
• 2008

ZnO nanowires were synthesized by the thermal evaporation method and their growth mechanisms were confirmed by the characterization of the structural features depending on the growth conditions. The increase of vaporization temperature accelerates the growth rate and morphologies of ZnO nanowires were drastically changed at the temperature over 1000$^{\circ}C$, because of changed $CO/CO_2$ partial pressure. Au particles play their role on growth of ZnO nanowire as catalyst at growth temperature over 700$^{\circ}C$. The synthesized ZnO nanowires exhibit blue emission at 380 nm.

• Journal of Korea Foundry Society
• /
• v.35 no.6
• /
• pp.155-162
• /
• 2015

The effect of Sr addition on mechanical and bio-corrosion properties of as-cast Mg-3wt.%Zn-0.5wt.%Ca-xwt.%Sr (x = 0.3, 0.6, 0.9) alloys were examined for application as biodegradable implant material. The microstructure, mechanical properties and corrosion resistance of the as-cast Mg-Zn-Ca-Sr alloys were characterized by using optical microscopy, scanning electron microscopy, tensile testing and electrochemical measurement in Hank's solution. The as-cast alloys contained ${\alpha}$-Mg and eutectic $Ca_2Mg_6Zn_3$ phases, while the alloys contained ${\alpha}$-Mg, $Ca_2Mg_6Zn_3$ and Mg-Zn-Ca-Sr intermetallic compound when the Sr addition was more than 0.3 wt.%. The yield strength, ultimate tensile strength and elongation increased with the increasing of Sr content up to 0.6 wt.% but decreased in the 0.9 wt.% Sr-added alloy, whereas the corrosion resistance of 0.3 wt.% Sr-added alloy was superior to other alloys. It was thought that profuse Mg-Zn-Ca-Sr intermetallic compound deteriorated both the mechanical properties and corrosion resistance of the as-cast alloy.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.603-607
• /
• 2010

Turquoise blue pigment of Vanadium-zircon blue (DCMA number 14-42-2), which was already commercialized, was stable to be reproduced but insufficient to give strong blue. However, it possible to obtain more intense blue by partially substituting cobalt ions into the willemite($Zn_2SiO_4$) lattice classified into DCMA number 7-10-2 for blue ceramic pigment. By the composition of willemite $Co_xZn_{2-x}SiO_4$(X=0.01, 0.03, 0.05, 0.07, 0.09 mole), this study used reagent grade zinc oxide, cobalt oxide and silicon dioxide as starting materials, carrying out the synthesis with solid reaction method by adding $H_3BO_3$ as a mineralizer. The firing temperature was between $1200^{\circ}C$ and $1400^{\circ}C$. The characteristics of synthesized pigment were analyzed by X-ray diffraction, Raman spectroscopy and SEM and the characteristics of color tones were analyzed by UV-Vis spectroscopy and CIE-$L^*a^*b^*$ measurement. As a result, the optimal composition was $Zn_{1.95}Co_{0.05}$ with 1wt% of $H_3BO_3$ as a mineralizer and firing condition was $1350^{\circ}C$/3 h. $L^*a^*b^*$ value was 29.25, 41.03, -59.93 for on glaze pigment and 37.03, 36.41, -60.03 for under glaze pigment.

• Journal of Korea Foundry Society
• /
• v.18 no.3
• /
• pp.283-288
• /
• 1998

Interest in rapid solidification of magnesium alloys stems from the fact that conventional ingot metallurgy alloys exhibit poor strength, ductility, and corrosion resistance. Such properties can be improved by microstructural refinement via rapid solidification processing. In this study, Mg-Zn alloys have been produced as continuous strips by melt overflow technique. In order to evaluate the influence of additional elements on the grain refinement and mechanical properties, Th and Zr were added in rapidly solidified Mg-5wt%Zn alloy. Then the microstructual observations were undertaken with the objective of evaluating the grain refinement as function of the cooling rate and the additional elements. The tremendous increase in hardness of Mg-Zn base alloys was mainly due to the refinement of the grain structure by the effect of rapid solidification and alloying elements. The formation of intermetallic phases on the grain boundaries may have a positive effect on the corroion resistance. Therefore, despite competition from many other developments, the rapid solidification processing of magnesium alloys emerges as a valuable method to develop superior and commercially acceptable magnesium alloys.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.84-84
• /
• 2008

A multidimensional ZnO light-emitting diode LEDstructure comprising film/nanorods/substrate was fabricated on a p-type Si substrate using metal organic chemical vapor deposition at relatively low growth temperature. The filmlike top layer used for the metal contact was continuously formed on the ZnO nanorods by varying the growth conditions and the resulting structure allowed us to utilize the nanorods with intense emission as an active layer. We investigated the performance of the resulting multidimensional LED. An extremely high breakdown voltage and low reverse leakage current as well as typical rectification behavior were observed in the I-V characteristics.