• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1488-1493
• /
• 2017

Boron-doped ZnO:Al films were deposited by rf magnetron sputtering. The structural and optical property variations of the films with the boron amounts were studied. ZnO nanorods were grown on $SiO_2/Si$ wafers and glass by a hydrothermal method. ~50 nm-thick boron-doped ZnO:Al films were deposited on the substrates as seed layers. The mixed solution of zinc nitrate hexahydrate and hexamethylenetetramine in DI water was used as a precursor for ZnO nanorods. The concentration of zinc nitrate hexahydrate and that of hexamethylenetetramine were 0.05 mol, respectively. ZnO nanorods were grown at $90^{\circ}C$ for 2 hours. X-ray diffraction was conducted to observe the crystallinity of ZnO nanorods. A field emission scanning electron microscope was employed to study the morphology of nanorods. Optical transmittance was measured by a UV-Vis spectrophotometer, and photoluminescence was carried out with 266 nm light. The ZnO nanorods grown on the 0.5 wt% boron-doped ZnO seed layer showed the best crystallinity.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.190-196
• /
• 2007

This study examined the nitrate removal efficiency which uses an electrowinning, and also analyzed the nitrate removal efficiency under a variety of operating conditions such as nitrate concentrations, pH, current densities, electrodes, reducing agents in order to determine optimal conditions. In addition, the multi-step electro-chemical process test has been also analyzed. During the electrowinning, the identical Zn-Zn and Pt-Ti electrodes in the insoluble oxidation electrode(Pt) has shown the highest nitrate removal efficiency in the 100 mg $NO_3^{-}$ -N/L concentration. In the concentration of 150 mg $NO_3^{-}$ -N/L, the efficiency of the Zn-Zn electrode were 70~85%, and that of Pt-Ti electrode were 40~50% without any change of pH. In the high concentration of 500 and 1,000 mg $NO_3^{-}$ -N/L, the higher the concentration, the more decrease of its nitrate removal efficiency decreased. However, the energy consumed for nitrogen removal increased when the nitrate concentration was high. As a result of the multi-step electro-chemical process test, We chose the Test 4. Because the first, most of the zinc consumed from 1 step was recovered from over the 2 step. The second, amount of consumption anode decreased with insoluble anode Pt from over the 2 step. And the third, Zn cathode increased the possibility of reusing Zn deposited. In view of the results so far achieved, the multi-step electro-chemical process would be applied to treat nitrogen involved in metal finishing wastewater.

• Korean Journal of Materials Research
• /
• v.20 no.7
• /
• pp.351-355
• /
• 2010

Transparent conducting aluminum-doped ZnO thin films were deposited using a sol-gel process. In this study, the important deposition parameters were investigated thoroughly to determine the appropriate procedures to grow large area thin films with low resistivity and high transparency at low cost for device applications. The doping concentration of aluminum was adjusted in a range from 1 to 4 mol% by controlling the precursor concentration. The annealing temperatures for the pre-heat treatment and post-heat treatment was $250^{\circ}C$ and 400-$600^{\circ}C$, respectively. The SEM images show that Al doped and undoped ZnO films were quite uniform and compact. The XRD pattern shows that the Al doped ZnO film has poorer crystallinity than the undoped films. The crystal quality of Al doped ZnO films was improved with an increase of the annealing temperature to $600^{\circ}C$. Although the structure of the aluminum doped ZnO films did not have a preferred orientation along the (002) plane, these films had high transmittance (> 87%) in the visible region. The absorption edge was observed at approximately 370 nm, and the absorption wavelength showed a blue-shift with increasing doping concentration. The ZnO films annealed at $500^{\circ}C$ showed the lowest resistivity at 1 mol% Al doping.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.4 s.54
• /
• pp.61-68
• /
• 2004

Hair driers and chemicals used in beauty shops generate a number of heavy metals and $PM_{10}$. Also many $PM_{10}$ are produced during hair cut. The pollutions raised health problems and uncomfortableness to hair dressers and customers in beauty shops. This study investigated to assess indoor, outdoor and personal particulate pollutants ($PM_{10}$ and Heavy metals) mean concentrations and the source of the pollutants in beauty shops. The results are summarized as follows: 1. The measured mean concentrations of respiratory particulates were $30.5ng/m^2$ in indoor, $30.5ng/m^2$ in outdoor and$44.0ng/m^2$ on personal levels. The personal concentration was found higher than indoor and outdoor concentrations. 2. The heavy metals mean concentrations were showed as indoor (Na>Zn>Cr), outdoor (Cr>Zn>Pb), and personal (Na>Cr>Zn) levels. 3. Chemicals and hair driers were regarded as the major sources of the pollutions. 4. Na was correlated with Mg, Zn and Cd, while Mg was correlated with Ni. Mn was correlated with Cu, Zn and AS, where as Cu was correlated with Zn, As and Cd. Zn and As, and Asand Cd were correlated each other. Na was inversely correlated with Cr.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.216-217
• /
• 2008

Zinc-oxide films were deposited by pulsed laser deposition (PLD) technique using doped ZnO target (mixed $In_2O_3$ 0.1, 0.3, 0.6 at. % - atomic percentage) on the p-type Si(111) substrate. A little Indium has added at the n-ZnO films for the electron concentration control and enhanced the electrical properties. Also, post thermal annealed ZnO films are shown an enhanced structural and controled electron concentration by the annealing condition for the hetero junction diode of a better emitting characteristics. The electrical and the diode characteristics of the ZnO films were investigated by using Hall effect measurement and current-voltage measurement.

• Journal of the Korean Vacuum Society
• /
• v.12 no.4
• /
• pp.269-274
• /
• 2003

The electrical, optical and structural properties of ZnNiO thin _ films deposited on Si substrates using rf-magnetron sputtering method have been investigated before and after the thermal annealing processes. The crystallinity of the ZnNiO thin film become degraded with increasing the Ni contents. This is mainly because the lattice of the thin film was expanded due to the oxygen-deficient conditions. Concerning the electrical properties of the thin film, the carrier concentration increases ($6.81\times10^{14}\textrm{cm}^{-2}$) and Hall mobility decreases (36.3 $\textrm{cm}^2$/Vㆍs) with higher doping concentration of Ni. However, the carrier concentration and Hall mobility became low ($1.10\times10^{14}\textrm{cm}^2$ and high (209.6 $\textrm{cm}^2$/Vㆍs), respectively, after the thermal annealing process at $1000 ^{\circ}C$. We also observed a strong luminescene center peaking at 546 nm in photoluminescence spectra, which was caused by a deep level center in the ZnO band gap with oxygen deficient ZnNiO structure.

• Korean Journal of Environmental Biology
• /
• v.30 no.2
• /
• pp.136-142
• /
• 2012

Acute toxicity test of heavy metal (Cd, Cu, Zn) were examined using the hatching rates of fertilized eggs in the oliver flounder, Paralichthys olivaceus. Eggs were exposed to Cd, Cu, Zn (0, 10, 100, 500, 1000, 2500, 5000 ppb) and then normal hatching rates were investigated after 48 h. The normal hatching rates in the control condition (not including Cd, Cu and Zn) were greater than 80%, but suddenly decreased with increasing of heavy metal concentrations. Cd, Cu and Zn reduced the normal hatching rates in concentration-dependent way and a significant reduction occurred at concentration grater than 1000, 100, 100 ppb, respectively. The ranking of heavy metal toxicity was Zn>Cu>Cd, with $EC_{50}$ values of 584, 1015 and 1282 ppb, respectively. The no-observed-effect-concentration (NOEC) and the lowest-observed-effect-concentration (LOEC) showed each 100 and 500 ppb of normal hatching rates in exposed to Cu and Zn. The NOEC and LOEC of normal hatching rates in Cd were 500 ppb and 1000 ppb, respectively. From these results, the normal hatching rates of P. olivaceus have toxic effect at greater than the 100 ppb concentrations in Cu, Zn and the 500 ppb concentrations in Cd in natural ecosystems. These results suggest that biological assay using the normal hatching rates of P. olivaceus are very useful test method for the acute toxicity assessment of a toxic substance as heavy metal in marine ecosystems.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.105-114
• /
• 1995

There has been increasing awareness on the importance of not only removal of organic materials but also sterilization of microbial cell in the drinking water purification research, so there has been many researches on that area. This study has been designed to analyze the effects of $TiO_{2}$ and ZnO coated on activated carbon on Escherichia coli. In this study, the sterilization power was analyzed by (1) variation of $TiO_{2}$ and ZnO concentration coated on activated carbon (2) variation of UV intensity. In addition, the kinetics between exposure time and sterilization velocity was viewed by the method of Chick. The results are as follows. 1. Survival ratio of E. coli decreased as time goes on in application of $TiO_{2}$, ZnO and $TiO_{2}{\cdot}ZnO$. In $TiO_{2}$ and ZnO, the effect increased upto certain concentration, but decreased there-after. In $TiO_{2}{\cdot}ZnO$, the effect of sterilization was in similar way among 3 combinations. 2. Survival ratio of E. coli decreased proportionately to an increase of light intensity in ZnO and $TiO_{2}{\cdit}ZnO$. In $TiO_{2}$, the survival ratio differed over extent of irradiation but the difference over the light intensity was not significant. 3. When Chick's law of sterilization was applied, m values of three concentrations of $TiO_{2}$ were 1.57,0.98, 1.96 respectively. M values of three concentration of ZnO were 1.10, 1.18,0. 11 respectively and those of three combination of $TiO_{2}{\cdot}ZnO$ were 1.17, 1.24, 1.74 respectively.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.132-136
• /
• 2007

Zinc is essential metal and plays a role in a wide variety of physiological and biochemical processes. Prostate gland contains high level of zinc, generally 3-10 folds higher than other organs. Prostatic zinc uptake is resulted from the existence of zinc transporter (ZnT) protein families in membrane. In this study, we investigated the difference of zinc uptake efficiency of zinc-aspartate complex (Zn-Asp) into various organs compared with $ZnSO_4$. We observed that Plasma zinc concentration in both $ZnSO_4$ and Zn-Asp administrated group was increased progressively following administration, and reached a peak level at 2 hr. The increasing pattern of zinc concentration was similar to each groups, however the zinc concentration of Zn-Asp administrated group was higher than that of $ZnSO_4$ administrated group. We found that prostatic zinc level of Zn-Asp administrated group was higher than $ZnSO_4$ administrated group, and was increased approximately $\sim$2.7 fold and $\sim$4.2 fold at 4 and 8 hr after administration. From these observations, we suggest than Zn-Asp has high uptake efficiency of zinc into the prostate gland. Therefore, Zn-Asp is potentially useful treatment of many prostatic diseases.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.270-275
• /
• 2016

We report on an all-solution-processed hydrothermal method to control the morphology of ZnO nanostructures on Si substrates from three-dimensional hemispherical structures to two-dimensional thin film layers, by controlling the seed layer and the molar contents of surfactants during their primary growth. The size and the density of the seed layer, which is composed of ZnO nanodots, change with variation in the solute concentration. The ZnO nanodots act as heterogeneous nucleation sites for the main ZnO nanostructures. When the seed layer concentration is increased, the ZnO nanostructures change from a hemispherical shape to a thin film structure, formed by densely packed ZnO hemispheres. In addition, the morphology of the ZnO layer is systematically controlled by using trisodium citrate, which acts as a surfactant to enhance the lateral growth of ZnO crystals rather than a preferential one-dimensional growth along the c-direction. X-ray diffraction and energy dispersive X-ray spectroscopy results reveal that the ZnO structure is wurtzite and did not incorporate any impurities from the surfactants used in this study.