• Bulletin of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.265-267
• /
• 2005

An efficient method of addition of trimethylsilyl cyanide to aldehydes by employing a zirconium complex as the catalyst has been described. A variety of aromatic, aliphatic, cyclic and heterocyclic aldehydes has been converted into corresponding trimethylsilyl ethers in excellent yield within short reaction time.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.283-286
• /
• 2010

A sensitive and reproducible method for the flotation-spectrophotometric determination of zirconium is reported. The method is based on the complex formation zirconium and xylenol orange (XO) which is floated in the interface of aqueous phase and n-hexane by vigorous shaking. By discarding the aqueous solution and n-hexane, the adsorbed complex on to the wall of a separating funnel was dissolved in a small volume of methanol solvent and its absorbance was measured at 429 nm. The effect of different parameters such as pH, concentrations of HCl, and XO, and volume of n-hexane flotation dissolvent, standing and shaking time were studied. The calibration curve was linear in the range of 7-120 ng $mL^{-1}$ of zirconium with a correlation coefficient of 0.9991. The limit of detection (LOD) was 5.8 ng $mL^{-1}$. The relative standard deviation (RSD) for seven replicate measurements of 50 and 110 ng $mL^{-1}$ of zirconium were 4.4 and 3.0%, respectively. The method was successfully applied to the determination of zirconium in water samples.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.852-854
• /
• 2005

• Journal of Pharmaceutical Investigation
• /
• v.18 no.3
• /
• pp.107-111
• /
• 1988

Zr, Cu, Zn and Fe-pyrithione complexes were prepared in aqueous medium and their antimicrobial activities were evaluated by MIC and cylinder plate methods against Bacillus subtilis, Sarcina lutea, Staphylococcus aureus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Trichophyton mentagrophytes, Candida albicans, Asperillus niger and Saccharomyces cerevisiae. Zr-pyrithione possessed most potent activities among the metal complexes against a wide range of microorganisms, especially Gram positive, B. subtilis, S. aureus and fungus, C. albicans. And all of the metal complexes synthesized were more active than pyrithione base. Fe(III)-pyrithione complex has an equal potency to Zn-pyrithione in general but it showed potent activity against B. subtilis microorganism than Zn-pyrithione.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.4
• /
• pp.455-461
• /
• 2005

This study was designed to investigate the fundamental aspects of a possible recovery of phosphorus strategy from wastewater by using the zirconium mesoporous structured materials as a new type of ion exchangers. Zirconium mesoporous structure material was synthesized by hydro-thermal synthesis. The synthesized zirconium mesoporous structure was examined by X-ray diffraction (XRD) and Transmission electron micrograph (TEM). From the results of XRD and TEM, it was found out that hexagonal mesoporous structure, pore size was about $47{\AA}$, was synthesized. Experimental results showed that the complex of zirconium sulfate tetrahydrate and surfactant micelles had very high ability for capture of phosphorus. The amount of phosphate ions exchanged into the solid was as great as 3.4mmol/g-ZS. And the ion exchange reaction was occurred between $PO_4{^{3-}}$ and $SO_4{^{2-}}$ and also between $PO_4{^{3-}}$ and $OH^-$. Therefore, it is possible to get the higher removal efficiency than other ion exchange media and adsorbent.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1127-1134
• /
• 2007

It was demonstrated that Y[N(TMS)2]3, the neutral yttrium-diamine complex 13 and yttrium-NPS complexes 15 are efficient precatalysts for intramolecular hydroamination of aminoalkynes involving primary amines. Complex 13 and 15 were quantitatively prepared in situ by direct metalation of the ligands 4 and 9 with 1 equiv of Y[N(TMS)2]3 in benzene-d6 at 120 oC for 5 days and 10 days, respectively, via elimination of (TMS)2NH. 5-Exo- and 6-exo-dig intramolecular hydroamination of aminoalkynes using catalyst 12 and 13 proceeded smoothly to give nitrogen-contained cyclic products in good to excellent yields in all cases. In the case of 7- exo-dig intramolecular hydroamination, the desired product was produced in 41% and 48% yields despite the gem-dimethyl effect. However, treatment of catalyst 15 with aminoalkynes (19 and 22) having a methyl substituent at the carbon adjacent to triple bond and 6-exo-dig intramolecular hydroamination of 21 failed to give the desired products. Zirconium-catalyzed intramolecular hydroamination of aminoallenes (25, 27, and 31) with 5 mol% 16 afforded 2-(trans-1-propenyl)pyrrolidine, 2-isopropylenepyrrolidine, and 2-(trans-1- propenyl)piperidine in 96%, 95%, and 93% yield, respectively. However, subjecting 25 to 5 mol% 15 was unsuccessful to produce the desired product.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.479-481
• /
• 2009

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.8-13
• /
• 2012

The experiments have been performed to obtain zinc complex compound with smaller particle size, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation of different sizes of zinc complex-compound particle. Reactants such as zinc chloride and 3,5-di-tert-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Zirconium (IV) oxychloride octahydrate has been mixed in the zinc chloride solution beforehand to restrain crystals from growing. When PEG-300 and zirconium (IV) oxychloride octahydrate are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from 5.28 to 1.84 ${\mu}m$, which is 34.9% of 5.28 ${\mu}m$.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.13 no.2
• /
• pp.75-83
• /
• 2017

In severe accident conditions of light water reactors, the loss of coolant may cause problems in integrity of zirconium fuel cladding. Under the condition of the loss of coolant, the zirconium fuel cladding can be exposed to high temperature steam and reacted with them by producing of hydrogen, which is caused by the failure in oxidation resistance of zirconium cladding materials during the loss of coolant accident scenarios. In order to avoid these problems, we develop a multi-metallic layered composite (MMLC) fuel cladding which compromises between the neutronic advantages of zirconium-based alloys and the accident-tolerance of non-zirconium-based metallic materials. Cold pilgering process is a common tube manufacturing process, which is complex material forming operation in highly non-steady state, where the materials undergo a long series of deformation resulting in both diameter and thickness reduction. During the cold pilgering process, MMLC claddings need to reduce the outside diameter and wall thickness. However, multi-layers of the tube are expected to occur different deformation processes because each layer has different mechanical properties. To improve the utilization of the pilgering process, 3-dimensional computational analyses have been made using a finite element modeling technique. We also analyze the dimensional change, strain and stress distribution at MMLC tube by considering the behavior of rolls such as stroke rate and feed rate.

• Journal of Pharmaceutical Investigation
• /
• v.20 no.3
• /
• pp.145-152
• /
• 1990

Zirconium pyrithione complex was prepared by reaction of sodium-pyrithione solution and zirconyl chloride solution. The physico-chemical properties of the complex was examined by means of IR, XRD, DSC and NMR. And the stability of Zr-complex was investigated on the basis of accelerated stability analysis under conditions of temp. elevation, UV radiation and pH dependence. The result indicates that the ratio of the ligand to metal in Zr-pyrithione complex was determined 4:1, and its stability constant was $4.643{\times}10^4$. The rate order of decomposition of the complex was apparent first-order reaction of which rate constant and the decomposition rate was not only accelerated by effect of heat and UV radiation but was catalyzed by specific acid-base catalysis considered the pH dependence for the hydrolysis of the complex and the suspension was most stable over the range pH 4-8 indicating that solvent catalysis is the primary made of reaction in this region.