• 한국재료학회지
• /
• 제12권2호
• /
• pp.140-145
• /
• 2002

This study was conducted to investigate the brazing characteristics between Zircaloy-4 nuclear fuel cladding tubes and bearing pads with filler metals of amorphous $Zr_{1-x}Be_x$(0.3$\leq$x$\leq$0.5) binary alloy, in which they were produced in the ribbon form by the melt-spinning metod. The crystallization behavior, stability, hardness and micro-structure of brazed zone were examined by X-ray diffraction, differential scanning calorimetry, micro-Vickers hardness test, optical microscopy, and transmission electron microscopy. $Zr_{1-x}Be_x$(0.3$\leq$x$\leq$0.4) amorphous alloys were crystallized to $\alpha$-Zr with increasing the temperature, and the rest were transformed to ZrBe$_2$at higher temperatures. On the other hand, $Zr_{1-x}Be_x$(0.4$\leq$x$\leq$0.5) amorphous alloys were crystallized to $\alpha$-Zr and ZrBe$_2$, simultaneously. The thickness of the layer brazed with amorphous alloy was increased with increasing the beryllium content due to the higher diffusion of Be. The morphology of brazed layer with PVD Be filler metal showed dendrite while that brazed with amorphous alloys appeared globular. Micro-Vickers hardness of brazed zone increased as the beryllium content of filler metal was decreased.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.611-616
• /
• 1995

핵연료 피복관의 일차 결함을 통해서 유입되는 냉각수에 의한 피복관 내면의 산화와 이에 따른 수소침투가 핵연료 피복관의 기계적 건전성에 미치는 영향을 규명하기 위한 연구를 수행하였다. 시험 시편은 Westinghouse, NRG, Sandvik에서 제조되는 Zircaloy-4 tube와 Westinghouse사에 개발한 신 합금인 ZIRLO™를 동일한 조건에서 수증기 산화와 수소 주입 실험을 수행하여 제조회사별 성능 평가를 하였으며 기계적 건전성 저하의 평가 방법으로 튜브 파열 실험(tube burst test)을 상온에서 수행하였다. 그 결과는 수소 침투량에 따라 피복관의 기계적 건전성이 지수적으로 감소하는 경향을 보였으며 500ppm이상에서는 취성파괴현상을 보이며 심각한 연성저하를 나타냈다. 제조회 사별 성능 평가에서는 A사 제품이 내식성과 수소흠수특성에서 다른 B, C, D사 제품에 비해 떨어지는 것으로 나타났다.

• Journal of Welding and Joining
• /
• 제7권2호
• /
• pp.60-69
• /
• 1989

The present study was aimed at investigating the effect of welding parameters such as welding current, electrode force(or squeeze force) and parts cleaning on the sound weld, and establishing the most reliable weld conditions for HWP(Heavy Water Reactor) fuel end capping with the resistance upset butt welding. Major results obtained are as follows. 1. The amount of sound weld was increased with increasing weld current(5.0-11KA) because the activated diffusion with increasing heat generation played an important role in eliminating the porosity and weld line in the weld interface. 2. It was found that weld current was not significantly influenced by the electrode force although the increase of it caused a slight increase of weld current and upset deformation. 3. Acetone rinsing before drying for the Zircaloy-4 end cap cleaning produced the reliable sound weld because it would remove the remaining solvent and surface films, and provided the uniform contact between the end cap and the tube. 4. The optimum welding conditions for fuel end capping by a resistance upset hytt welding are obtained as follows. weld current: 10-11KA, electrode force: 62-90KPa parts cleaning: vapor degreasing.rarw.water, acetone rinsing.rarw.drying.

• 비파괴검사학회지
• /
• 제22권1호
• /
• pp.59-64
• /
• 2002

CANDU형 핵연료채널 압력관(Zr-2.5%Nb)과 calandria관(Zircaloy-2)에 대한 원격장 와전류탐상의 자계분포특성을 파악하기 위하여 유한요소 해석을 수행하였다. 압력관과 칼란드리아관의 전자기장 분포와 위상각 해석을 통하여 최적 검사 주파수와 감지코일의 위치를 평가하였다. 또한 축대칭 구조물(Al-ring과 Al-block)이 공존시 파라미터해석을 통하여 원격장 와전류의 특성을 평가하였다.

• Journal of Welding and Joining
• /
• 제10권4호
• /
• pp.240-249
• /
• 1992

The objective of this study is to investigate the characteristics of welded joints on the Zircaloy-4 resistance upset welding for HWR(Heavy Water reactor)fuel rods. To estimate the characteristics of welded joints, the various tests were performed on the test coupons systematically with a wide range of each welding parameters in terms of a tensile test, burst test, knoop hardness test and metallography. Major results obtained in this study are as follows: 1. The tube and machined with 120.deg. projection was the reliable weld joint design for the nuclear fuel rod end cap welding. 2. As the weld current and the amount of upset increased linearly with increasing welding main heat input, it could make an estimate of their variation in accordance with the phase shift control. 3. It was found that an increase in squeeze force has an effect on the upset contour of welded joint because the amount of upset were increased by the change of squeeze force.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.238-248
• /
• 2019

In the high-temperature and high-pressure irradiation environments, the multi-field coupling processes of hydrogen diffusion, hydride precipitation and mechanical deformation in Zircaloy cladding tubes occur. To simulate this hydrogen-induced complex behavior, a multi-field coupling method is developed, with the irradiation hardening effects and hydride-precipitation-induced expansion and hardening effects involved in the mechanical constitutive relation. The out-pile tests for a cracked cladding tube after irradiation are simulated, and the numerical results of the multi-fields at different temperatures are obtained and analyzed. The results indicate that: (1) the hydrostatic stress gradient is the fundamental factor to activate the hydrogen-induced multi-field coupling behavior excluding the temperature gradient; (2) in the local crack-tip region, hydrides will precipitate faster at the considered higher temperatures, which can be fundamentally attributed to the sensitivity of TSSP and hydrogen diffusion coefficient to temperature. The mechanism is partly explained for the enlarged velocity values of delayed hydride cracking (DHC) at high temperatures before crack arrest. This work lays a foundation for the future research on DHC.

• Nuclear Engineering and Technology
• /
• 제21권2호
• /
• pp.111-122
• /
• 1989

고온 수증기(1323 K)분위기에서 산화시킨 지르칼로이-4 피복관으로, 구리 맨드렐 팽창실험(Copper Mandrel Expension Test)을 변형률(Strain Rate)이 $3.0\times10^{-5}$/sec일때 673-1173 K 온도 범위에서 수행하였다. 본 연구에서, 산화매개변수(Ki)는 시간(t)의 제곱근에 비례하고 $(Ki=\delta_{kit}\frac{1}{2}$), 비례상수($\delta_{ki}$)는 무게증가(Weight Gain), Zr02의 두께, $\alpha$(0) 층에 대하여 각각 0.281, 2.82, 2.313을 사용하였다. 지르칼로이-4의 고온(873-1073 K) 소성변형에 의한 활성화 에너지는 Zr02가 높은 강도를 갖기 때문에 산화 시간이 5분에서 60분으로 증가함에 따라 251 KJ/mol에서 323KJ/mo1로 증가하였다. 산화막 두께, K와 항복 응력의 관계는 ($\sigma/C)^n=K^m$exp (Q/RT)인 관계식을 얻었다. 여기서 n은 6.9, m은 5.7, 그리고 Q가 251, 258, 316, 323 KJ/mo1에 대해 C는 0.155, 0.138, 0.051, 0.046MPa이다.

• Nuclear Engineering and Technology
• /
• 제40권1호
• /
• pp.21-36
• /
• 2008

High bum-up fuel technology has been developed through a national R&D program, which covers key technology areas such as claddings, $UO_2$ pellets, spacer grids, performance code, and fuel assembly tests. New cladding alloys were developed through alloy designs, tube fabrication, out-of-pile test and in-reactor test. The new Zr-Nb tubes are found to be much better in their corrosion resistance and creep strength than the Zircaloy-4 tube, owing to an optimized composition and heat treatment of the new Zr-Nb alloys. A new fabrication technology for large grain $UO_2$ pellets was developed using various uranium oxide seeds and a micro-doping of Al. The uranium oxide seeds, which were added to $UO_2$ powder, were prepared by oxidizing and heat-treating scrap $UO_2$ pellets. A $UO_2$ pellet containing tungsten channels was fabricated for a thermal conductivity enhancement. For the fuel performance analysis, new high burnup models were developed and implemented in a code. This code was verified by an international database and our own database. The developed spacer grid has two features of contoured contact spring and hybrid mixing vanes. Mechanical and hydraulic tests showed that the spacer grid is superior in its rodsupporting, wear resistance and CHF performance. Finally, fuel assembly test technology was also developed. Facilities for mechanical and thermal hydraulic tests were constructed and are now in operation. Several achievements are to be utilized soon by the Korea Nuclear Fuel and thereby contribute to the economy and safety of PWR fuel in Korea

• 한국재료학회지
• /
• 제14권7호
• /
• pp.451-456
• /
• 2004

Thermal creep properties of the zirconium tube which was developed for high burnup application were evaluated. The creep test of cladding tubes after various final heat treatment was carried out by the internal pressurization method in the temperature range from $350^{\circ}C to 400^{\circ}C$ and from 100 to 150 MPa in the hoop stress. Creep tests were lasted up to 900days, which showed the steady-state secondary creep rate. The creep resistance of zirconium claddings was higher than that of Zircaloy-4. Factors that affect creep resistance, such as final annealing temperature, applied stress and alloying element were discussed. Tin as an alloying element was more effective than niobium due to solute hardening effect of tin. In case of advanced claddings, the optimization of final heat treatment temperature as well as alloying element causes a great influence on the improvement of creep resistance.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.126-133
• /
• 2005

Mechanical properties of zirconium cladding were evaluated by ring tension test to simulate Reactivity-Initiated Accident (RIA) at high burnup situation as an out-reactor test. Zircaloy-4 cladding was hydrided up to 1000 ppm as well as oxidized up to $100\;{\mu}m$ to simulate high-burnup situation. After simulated high-burnup treatment, ring tension test was carried out from 0.01 to 1/sec to correlate with actual RIA event. The results showed that ductility and circumferential toughness decreased with the hydrogen content and oxide thickness. Hydride generated inside cladding acted as brittle failure. Oxygen influenced cladding tube by the reduction of load bearing area, oxygen embrittlement, and thermal aging. Correlation between in-reactor RIA parameter like fuel enthalpy and out-reactor toughness was performed and showed a reasonable result.