• Journal of Power System Engineering
• /
• v.8 no.4
• /
• pp.38-43
• /
• 2004

Thermal spraying onto the metal substrate has been widely used as a technique of the surface treatment in the various industrial field. A wide range of thermal spray technologies exist and all rely on the fundamental process of fusing a metal feedstock, atomizing it and transporting it to the surface of a substrate. Specially, these methods have been taken into account as the protection method against the corrosion. In this study, the polarization characteristics were carried out on the thermal sprayed coating layer immersed in various pH of diluted aqueous solutions at $25^{\circ}C$. Aluminum, Zinc, Ni-base alloy, alumina and polyethylene powder were used with sprayed coating materials. From the polarization curves, the electrochemical corrosion potential($E_{corr}$) and the corrosion current density($I_{corr}$) were investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.118-121
• /
• 2005

The square cup drawing of magnesium alloy AZ31 $(aluminum\;3\%,\;Zinc\;1\%)$ sheets was studied by experimental approach in various temperatures (200, 250, 300, 350, $400^{\circ}C$) when blank holding force (BHF) was controlled in real-time. And so on, the drawability was measured with the different die and punch coating. The square cup drawing test was performed by three different coated punches (CrN, TiCN, Non-coated). BHF was set about 2.0 KN, forming speed was 50 mm/min, blank thickness were 0.5, 1.0mm and the cup size was 40 mm by 60 mm after forming. The experimental data of square cup drawing test show that the tools coating and temperature were effect on the drawbility.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.155-157
• /
• 2007

The Friction spot dissimilar welding of galvanized steel/Al6061-T6 was performed to investigate the mechanical characteristics of the joints. The presence of thin film of aluminum oxide on the surface and melting of zinc in the coating, made substandard joint characteristics for dissimilar Friction spot joining(FSJ) performed with out removing the coating. Where as, for dissimilar FSJ of galvanized steel/Al6061-T6 after removing the coating, superior agitation and welding quality has been obtained for a configuration of galvanized steel as the upper plate and Al6061-T6 as lower plate. The results from tensile tests and microscopic examination for various combinations of the welding parameters have been presented.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.1
• /
• pp.22-27
• /
• 1999

This study was performed to investigated the contamination levels of harmful heavy metals were sampled from Aug. 1 to Aug. 31, 1997, at 9 areas in Cheonbuk area. The heavy metal contents were determinated by ICPS(Inductively Coupled Plasma Spectrometer) method. The levels of total lead, cadmium, aluminum, iron and copper were determined and the results were summarized as follows: The minimum and maximum values(ppm) of 9 areas of Carassius auratus were Pb: 2.03~6.19, Cd: 0.06~ 0.76, Al: 8.84~23.5, Zn: 10.68~48.71, Cu: 0.60~1.51ppm. Among the five heavy metals contents, the highest was zinc and the lowest was cadmium. The results showed that the contents of Pb, Cd, Al, Zn and Cu in Carassius auratus were lower than the FAO/WHO maximum allowance.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.506-508
• /
• 2003

In the case of a fire in the mountains, steel wires coated with zinc and aluminum wires of those power cables exposed to the fire or near around will be deteriorated by the blaze and the high temperature. This paper shows the experimental results that apply to a new wire by an artificial flame-maker and results including the intensity of extension and wrench for a conductor. In addition, there's been an experiment and analysis about the mechanical characteristics of the wire of ACSR $480mm^2$ which was removed from A T/L by a forest fire. Then, the database will be made to predict the state of deteriorated wires by a forest fire using those two data, and data necessary to diagnose the life state of an ACSR wire affected by a forest fire will be given.

• Korean Journal of Community Nutrition
• /
• v.1 no.3
• /
• pp.346-353
• /
• 1996

The anthropometric measurements, nutrient intake, concentrations of minerals in scalp hair and urine and urinary 5-hydroxyindoleacetic acid(5-HIAA) of 30 autistic children not taking psychoactive drugs and 30 nonautistic control children were determined. The autistic children were taking significantly lower amounts of vitamin A, niacin, ascorbic acid and iron. The intake of vitamin A, niacin, and iron in autistic children were found to be 22$\%$, 75$\%$ and 58 of RDA, respectively. The decreased anthropometric measurements in height and weight of autistic children seems partly due to lower intake of these micronutrients. The food intake in vitamin and mineral group of autistic children was significantly lower. It is probably related to decreased intake of fruit in autistic children. There was no toxicity of cadmium and aluminum in both groups according to their contents in scalp hair. Autistic children showed elevated levels of hair calcium and zinc but lowered levels of copper and iron. The urinary excretion urinary excretion of 5-HIAA.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.242-243
• /
• 2007

Highly transparent conducting aluminum-doped zinc oxide (AZO) thin films were deposited on Corning glass substrate using an Nd:YAG pulsed laser deposition technology. AZO thin films deposited with 650nm thickness showed the best electrical properties of the electrical resistivity of $4.6{\times}10^{-4}[{\Omega}{\cdot}cm]$, a carrier concentration of $9.3{\times}10^{20}[cm^{-3}]$, and a carrier mobility of $31[cm^2/V{\cdot}s]$. Besides, the optical transmittance spectra in visible region (200-800nm) of AZO thin films show an high average transmittance over 90%.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.52-57
• /
• 2009

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, lead, zinc, aluminum, nickel and magnesium in this article. Domestic demand and production in recent years and current status on the recycling of the scraps of these non-ferrous metals are introduced briefly here.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.81-86
• /
• 2013

Since there are many kinds of non-ferrous metal, it is difficult to investigate the current status on the recycling of all the non-ferrous metals. Therefore, the survey is confined to some commercially important non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium in this article. Domestic demand and production of these non-ferrous metals in recent years(2010-2012) and recycling ratio of the scraps are estimated briefly here.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.444-445
• /
• 2007

Aluminum-doped zinc oxide (AZO) films are attractive materials as transparent conductive electrode because they are inexpensive, nontoxic and abundant element compared with indium tin oxide (ITO). AZO films have been deposited on glass (coming 1737) substrates by RF magnetron sputtering system. An ultrathin layer of nickel oxide (NiO) was deposited on the AZO anode to enhance the hole injections in organic light-emitting diodes (OLED). The current density-voltage and luminescence-voltage properties of devices were studied and compared with ITO device.