• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.384-390
• /
• 2005

[ ${\alpha}-Al_2O_3$ ] precursor was synthesised by sol-gel method using aluminum sulfate, sodium sulfate and sodium carbonate as law materials. The flaky ${\alpha}-Al_2O_3$ crystals were prepared by heating using precursor about $1,050^{\circ}C$. In this study, the effect of some transition-metal sulfate ($FeSO_4,\;SnSO_4,\;ZnSO_4$) addition have been investigated. When iron sulfate was added, it could see that act on impurities in crystal growth process. In case of tin sulfate, distribution of Platelets was very broad. When flaky ${\alpha}-Al_2O_3$ crystals were prepared zinc sulfate addition, thickness, size, and distribution of platelets was suited to industrial application. The average diameter of flaky ${\alpha}-Al_2O_3$ crystals was about 20 $\mu$m, and its thickness was about 0.3 $\mu$m. Increasing addition of zinc sulfate, thickness of ${\alpha}-Al_2O_3$ platelet was decreased.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.4
• /
• pp.207-212
• /
• 2014

Aluminum-doped zinc oxide (AZO) films were deposited on SiOC/Si wafer by an RF-magnetron sputtering system, by varying the deposition parameters of radio frequency power from 50 to 200 W. To assess the correlation of the optical properties between the substrate and AZO thin film, photoluminescence was measured, and the origin of deep level emission of AZO thin films grown on SiOC/Si wafer was studied. AZO formed on SiOC/Si substrates exhibited ultraviolet emission due to exciton recombination, and the visible emission was associated with intrinsic and extrinsic defects. For the AZO thin film deposited on SiOC at low RF-power, the deep level emission near the UV region is attributed to an increase of the variations of defects related to the AZO and SiOC layers. The applied RF-power influenced an energy gap of localized trap state produced from the defects, and the gap increased at low RF power due to the formation of new defects across the AZO layer caused by lattice mismatch of the AZO and SiOC films. The optical properties of AZO films on amorphous SiOC compared with those of AZO film on Si were considerably improved by reducing the roughness of the surface with low surface ionization energy, and by solving the problem of structural mismatch with the AZO film and Si wafer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.8
• /
• pp.692-697
• /
• 2016

This study investigated the effect of surface roughness of zinc oxide (ZnO) layer on the growth of polycrystalline Si layer via an Al-induced layer exchange process. It was found that the growth rate, grain size, crystallization fraction, and preferential orientation of the polycrystalline Si layer were strongly influenced by the surface roughness of the underlying ZnO layer. As the roughness of the ZnO surface increased, a higher growth rate (~40 min) and preferential Si (100) orientation were obtained because of the spatial concentration fluctuations in the Al-Si alloy, induced by the surface roughness of the underlying ZnO layer.

• Journal of Korea Foundry Society
• /
• v.31 no.4
• /
• pp.212-217
• /
• 2011

The effects of alloying element and grain refinement on the tensile properties of magnesium alloy poured into sand mold were investigated. The strength of magnesium alloy was greatly increased by the addition of aluminium and that was increased with the increased aluminum content added up to 8.10 wt% and decreased beyond that. Even though the strength of Mg-8.10 wt%Al alloy was rather decreased by the addition of zinc, that was increased with increased zinc content added up to 0.50 wt% and decreased with the increased one beyond that. The maximum tensile strength was obtained with 0.50 wt%Mn added. The strength and elongation were simultaneously increased with grain refinement and the optimum amount of strontium addition for this was 0.30 wt%. The optimum chemical composition was obtained and the yield strength, tensile strength and elongation of the alloy with this composition were 90.2, 176.3MPa and 4.43%, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.500-501
• /
• 2005

Aluminum doped zinc oxide films (ZnO:Al) were deposited on glass substrate by DC magnetron sputtering from a ZnO target mixed with 2 wt% $Al_2O_3$. The effects of substrate bias on the electrical properties and film structure were studied. Films deposited with positive bias have been annealed at $600^{\circ}C$ using rapid thermal anneal (RTA) process. The effects of RTA on the evolution of film microstructure are to be also studied using X-ray diffraction, transmission electron microscopy, and atomic force microscopy. Positive bias sputtering may induce lattice defects caused by electron bombardments during deposition. The as-deposited film microstructure evolves from the film with high defect density to more stable film condition. The electrical properties of the films after RTA process were also studied and the results were correlated with the evolution of film microstructures.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.188-188
• /
• 2010

최근까지는 주로 비정질 실리콘이 디스플레이의 채널층으로 상용화 되어왔다. 비정질 실리콘 기반의 박막 트랜지스터는 제작의 경제성 및 균일성을 가지고 있어서 널리 상용화되고 있다. 하지만 비정질 실리콘의 구조적인 문제인 낮은 전자 이동도(< 1 cm2/Vs)로 인하여 디스플레이의 대면적화에 부적합하며, 광학적으로 불투명한 특성을 갖기 때문에 차세대 디스플레이의 응용에 불리한 점이 있다. 이런 문제점의 대안으로 현재 국내외 여러 연구 그룹에서 산화물 기반의 반도체를 박막 트랜지스터의 채널층으로 사용하려는 연구가 진행중이다. 산화물 기반의 반도체는 밴드갭이 넓어서 광학적으로 투명하고, 상온에서 증착이 가능하며, 비정질 실리콘에 비해 월등히 우수한 이동도를 가짐으로 디스플레이의 대면적화에 유리하다. 특히 Zinc Oxide, Tin Oxide등의 산화물이 연구되고 있으며, indium이나 aluminum등을 첨가하여 전기적인 특성을 향상시키려는 노력을 보이고 있다. 본 연구에서는 Zinc Oxide 기반의 박막 트랜지스터를 DC magnetron sputtering를 이용하여 상온에서 제작한 후 다양한 조건에서의 후열처리를 통하여 소자의 특성의 최적화를 이루는 것을 시도하였다. 그리고 ITO를 전극으로 사용하여 bottom gate 구조의 박막 트랜지스터를 만들고 air 분위기에서 온도별, 시간별 열처리를 진행하였다. 또한 gate insulator의 처리를 통하여 thin film의 interface 개선을 통하여 소자의 성능 향상을 시도 하였다. semiconductor analyzer로 소자의 출력 특성 및 전이 특성을 평가하였다. 그 결과 기존의 a-Si 기반의 박막 트랜지스터보다 우수한 이동도의 특성을 갖는 ZnO 박막 트랜지스터를 얻었다. 그리고 이를 바탕으로 ZnO를 이용하여 대면적 적합한 디스플레이를 제작할 수 있다는 가능성을 보인다. 그리고 Temperature, Bias Temperature stability, 경시변화 등의 다양한 조건에서의 안정성을 평가하여 안정성이 향상을 확보하여 비정질 실리콘을 대체할 유력한 후보중위 하나가 될 것이라고 생각된다.

• Journal of Environmental Health Sciences
• /
• v.48 no.6
• /
• pp.306-314
• /
• 2022

Background: Due to the rapid aging of the South Korean population, neurological diseases such as dementia are increasing. Many studies have reported that the incidence of dementia is associated with environmental factors along with age. Objectives: This study analyzed the association between cognitive function and ten heavy metals in the body: arsenic, aluminum, chromium, manganese, cobalt, nickel, iron, copper, zinc, and lead. Methods: From 2018 to 2019, a total of 120 participants who suffered from cognitive impairment were recruited for this study. Blood and urine samples were collected and analyzed for heavy metal concentrations using an inductively coupled plasma mass spectrometer. Demographic information was obtained through face-to-face questionnaires completed by a trained investigator. Cognitive function was evaluated with the Korean version of the Mini-Mental State Examination and the Korean version of the Boston Name Waiting Test. The associations between cognitive function scores and heavy metal concentrations were analyzed using multiple logistic regression analysis. Results: The average age of the 120 participants was 72.7 years, and 69.2% were female. The mean of the MMSE-K and K-BNT scores were 22.9 and 37.9, respectively. The geometric mean of aluminum (Al) was 8.42 ㎍/L. MMSE-K was associated with iron (Fe), but the significance was removed in the logistic regression based on 24 points. K-BNT was significantly associated with aluminum and the odds ratio for K-BNT above 38 decreased by 45% as the aluminum concentration increased. Conclusions: The association between aluminum and the K-BNT score indicated that aluminum is associated with language-related cognitive decline. Based on this result, further study will be conducted by considering co-exposure effects of heavy metals including aluminum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.216.1-216.1
• /
• 2015

본 연구에서는 용액 공정 기반 AZTO (Aluminum-Zinc-Tin Oxide, AlZnSnO) 박막 트랜지스터를 제작하여 Al (Aluminum) 도핑과 열처리 온도의 가변을 통한 특성 향상을 확인하였다. ZTO 용액의 Zn:Sn 비율(4:7)을 고정하고 Al 도핑(0~8.3%)과 열처리 온도($350{\sim}550^{\circ}C$)를 가변하였다. 실험 결과 Al 도핑이 증가할수록 드레인 전류는 감소하고 문턱 전압이 양의 방향으로 이동하면서 포화 이동도와 아문턱 기울기가 감소하였다. 열처리 온도가 증가할 때는 드레인 전류가 증가하고 문턱 전압은 음의 방향으로 이동하며 이동도와 아문턱 기울기가 증가하였다. Al 도핑은 강한 금속-산소 결합에 의해 oxygen vacancy와 전자 농도가 감소하게 하여 드레인 전류, 이동도, 아문턱 기울기의 감소와 양의 방향 문턱 전압 이동을 야기한다. 열처리 온도가 높아지면 반도체 층의 분자 구조가 더 밀집되고 oxygen vacancy 가 증가하며, 이는 전자 농도의 증가로 이어져 Al 도핑의 효과와 반대의 경향을 보인다. 실험 결과를 통해 Al:Zn:Sn=0.5:4:7의 비율과 $350^{\circ}C$ 열처리 조건에서 문턱 전압과 이동도, 아문턱 기울기, 전류 온오프 비($I_{on}/I_{off}$)가 각각 3.54V, $0.16cm^2/Vs$, 0.43 V/dec, $8.1{\times}10^5$으로 우수한 특성을 확인하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.587-591
• /
• 1998

AZO transparent conducting thin film were fabricated by DC magnetron sputtering using the Zn: Al (2% aluminu contained ) alloy target with inducing microwave to the plasma, and the effect of microwave was studied. The optical transmittance, the resistivity and dynamic deposition rate at the applied voltage to target of 420 V was 50~70%, $ 5.5{\times}10^{-3}{\Omega}$cm and 6,000 $\AA\textrm{mm}^2$/J, respectively. After annealing AZO coated glass at $400^{\circ}C$ for 30 minutes, the light transmittance was increased to 80% and electrical conductivity was also increased two times, reached to resistivity of $2.0{\times}10^{-3}{\Omega}$cm.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.340-344
• /
• 2018

Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.