• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.393-398
• /
• 2009

In this paper, we study the design and implementation of an auto recognition system by using wireless sensor node. RFID system has a limited communication range and communication network is damaged, it is impossible to communicate. Therefore, easy installation and low cost wireless system are required in an area where the installation of communication between RFID system and monitoring system is difficult, or a portable RFID system is installed. The auto recognition system in this study is implemented by the combination of 13.56MHz RFID system using MLX12115 RFID chip of Melexis company and wireless sensor node system using CC2420 Zigbee chip of Chipcon company. As a result, we develop an auto recognition system which makes it possible to get tag's information wirelessly. Also, it has a simple circuit structure and is small in size.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.27-36
• /
• 2010

In wireless networks environment, there are attempts for constructing systems through which we can monitor and control various electronic devices used in large buildings at remoteness by using Zigbee protocol. Since address assignment method of DAA in Zigbee has a depth restriction, we cannot construct a network in large buildings. And also communication failures are frequent in a large network since broadcast storm can be occurred due to frequent broadcasts among a lot of nodes at AODV routing used in Zigbee. In order to solve these problems, in this paper, we propose a novel protocol which has improved the restriction of depth by using a fixed address assignment method, and has enhanced the broadcast occurrence by devising a static routing method to a packet movement between floors. Regardless of entire network, additionally, this was to enable internal communication reliably by composing an independent PAN. Specially, in this paper, we implemented the proposed wireless protocol and proved stability and practicality through experiment appliances of control of devices established in a large building.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.223-228
• /
• 2021

In this paper, we proposed a slot-type antenna with microstrip feed embedded in a PCB for Zigbee communication (2.4 ~ 2.484 GHz). The proposed antenna is designed on a FR-4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of 50×65 mm². Through simulations, trends of design parameters are analyzed and optimized, and the proposed antenna composed with three slots satisfy the frequency band. The measured impedance bandwidths (|S₁₁| ≤ -10 dB) of fabricated antenna are 900 MHz (2 ~ 2.9 GHz) in Zigbee frequency band. In addition, the radiation pattern showed omnidirectional characteristics for E and H-planes, and the gain of antenna in Zigbee frequency band was 1.782 dBi.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.190-192
• /
• 2005

USN이란 Ubiquitous Sensor Network의 약자로 모든 사물에 컴퓨팅 및 통신 기능을 부여하여 언제나, 어디서나, 어느 것으로나 통신이 가능한 환경을 구현하기 위한 것을 의미하는 것이다. 이런 USN에서 사물의 인식정보를 파악 하는데 부곽 되고 있는 기술이 RFID이다. RFID는 2차 세계대전 배행기의 식별을 위해서 만들어진 기술로 현재 국내에서는 13.56Mhz가 이미 공장의 공정관리에서 사용이 되고 있고 나머지 주파수 대역도 연구 및 실험이 진행 중이다. 하지만 태그의 가격이 높고 정책적인 면이 확정이 되지 않았으며 인식 거리의 제약으로 인하여 처음 목적 되로 실생활에 적용 하는 데는 아직 무리가 있다. 본 연구에서는 Zigbee 시스템에 RFID 모듈을 연결함으로써 Zigbee의 특징을 이용 RFID 무선통신을 위한 시스템을 설계 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1102-1105
• /
• 2009

최근 전국 각지의 설치되어 운영/관리 되고 있는 가로등 사업의 주요 이슈는 가로등/보안등으로 사용되는 광원 자체가 기존의 노란색 나트륨 등에서 CDM(백색 고휘도 메탈 등)계열로 급속히 전환되고 있다는 것이다. 빠르게 발전하는 근거리무선 통신 규약인 Zigbee를 통한 효율적인 관리와 에너지 효율성에 대한 관심도 증대되고 있다. 그러므로 본 연구에서, 저전력 Zigbee 근거리무선 통신 프로토콜을 이용한 네트워크 구축을 통하여 가로등간의 양방향 통신 시스템을 구축한다. 또한 이 연구를 통하여 에너지 효율성 증대와 운영과 관리의 편의성을 제시하고, 사업화 타당성을 분석한다.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.612-621
• /
• 2008

Due to the various constraints such as feasible size of data payload and low transmission power, no technical specifications on the voice communication are included in the Zigbee standard. In this paper, a voice coding technique for application to the IEEE 802.15.4 standard, which is the basis of Zigbee communication, is presented. Here, both high compression and good waveform recovery are essential. To meet those requirements, a multi-stage discrete wavelet transform (DWT) block and a binary coding block consisting of two different pulse-code modulations are exploited. Theoretical analysis and simulation results in an indoor wireless channel show that the voice coder with 2-stage DWT is most appropriate from the viewpoint of compression and waveform recovery. When the line-of-sight component is dominant, the voice coding scheme has good recovery capability even in the moderate signal-to-noise power ratios. Hence, it is considered that the presented scheme will be a technical reference for the future recommendation of voice communication exploiting Zigbee.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1391-1396
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1510-1518
• /
• 2006

As a promising technology that enables ubiquitous computing and leads IT(information Technology) industries of next generation, the exciting new field of sensor networks is attracting so much attention and considered to be the one of the hottest research topics these days. From now on, all the each node, forming a network, and even the sensor network itself will interact with the generic network and evolve dynamically according to the change of environment with the perpetual creation and extinction. In this paper, we purpose the dynamic address interworking scheme for interactive networking between sensor network and Internet(IPv6). Proposed scheme is enable to interworking dynamically between sensor network address scheme based on Zigbee and Internet address scheme based on IP. Additionally, we implement the proposed address interworking scheme using Berkeley TinyOS, mica motes, and IP protocol. And, we verify the proposed scheme by the interconnection experimental between wireless sensor networks and Internet based on IPv4/IPv6.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.109-112
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• Review of KIISC
• /
• v.20 no.5
• /
• pp.56-64
• /
• 2010

AMI는 스마트 그리드 구축을 위한 핵심 기술로, 현재의 단방향 폐쇄적 에너지 공급에서 양방향 에너지 종합관리시스템 구축을 위한 기반 기술이다. 스마트 미터 및 AMI 구축을 통하여 전기요금에 대응하여 에너지를 절약하는 가전 기기 보급 및 부하 관리가 실현되고, 최대 전력의 감소를 통하여 추가적인 발전소 건설비용이 절약되게 된다. Zigbee는 AMI 통신 구현을 위한 표준 기술로 개발되고 있다. 본 논문에서는 Zigbee 기반 AMI 시스템에서 AMI 시스템의 보안 특성 및 보안 요구사항에 대한 분석 결과를 제시하고자 한다.