• Title/Summary/Keyword: Zero-crossing period

Search Result 27, Processing Time 0.02 seconds

Measuring Angular Speed and Angular Acceleration for Automotive Windshield Wiper Pivot (자동차 와이퍼 피봇의 각속도 및 각가속도 측정)

  • Lee Byoungsoo
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.13 no.4
    • /
    • pp.58-65
    • /
    • 2005
  • A method measuring angular speed and estimating angular acceleration of an automotive wind shield wiper pivot with limited resources has been proposed. Limited resources refer to the fact that processes cannot be operated in real-time with a regular notebook running a Microsoft Windows. Also, they refer to the fact that data acquisition cards have only two general purpose counters as many generic cards do. An optical incremental encoder has been employed for measuring angular motion. To measure the angular speed of the pivot, periods for the encoder's output pulses have been measured as the speed is related to the reciprocal of the period. Since only information acquired from one counter channel is the magnitude of the angular speed, sign correction is necessary. Also the information for the exact time when a pivot passes left and right dead points is also missing and the situation is inherent to the hardware setup. To find out the zero-crossing time of the angular speed, a linear interpolation technique has been employed. Lastly, to overcome the imperfection of the mechanical encoders, the angular speed has been curve fitted to a spline. Angular acceleration can be obtained by a differentiation of the angular speed.

Numerical Simulation of Longshore Current due to Random Sea Waves (불규칙파에 의한 연안류의 수치계산)

  • 권정곤;양윤모
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.4 no.2
    • /
    • pp.72-82
    • /
    • 1992
  • To accurately estimate nearshore current in shallow water regions. it is necessary to investigate the irregular wave transformation characteristics and radiation stress produced by random sea waves. This research is to investigate the application or the individual wave Analysis Method. the Component Wave Analysis Method and Representative Wave Analysis Method in the shallow water region. These methods were estimated by wave shallowing transformation when the waves propagate from deep water to shallow water region b)r generating regular waves, two component waves and irregular waves (Bretschneider-Mitsuyasu type). That is, the Indivisual Wave Analysis Method is to investigate from the viewpoint of shallow water transformation of wave statistical characteristics and their zero-down-crossing waves (wave height period and wave celerity). And the component Wave Analysis Method is to investigate from the view point of shallow water transformation of basic frequency component wave and their interference frequency component wave. In addition, this research is to compare the measured mean water level elevation with the calculated one from radiation stress of irreguar waves that is assumed in the three methods above.

  • PDF

Analysis of the Likelihood of Successful Defibrillation as a Change of Cardiopulmonary Resuscitation Transition using Support Vector Machine (서포트 벡터 머신을 이용한 심폐소생술 변이의 변화에 따른 제세동 성공률 분석)

  • Jang, Seung-Jin;Hwang, Sung-Oh;Lee, Hyun-Sook;Yoon, Young-Ro
    • Journal of Biomedical Engineering Research
    • /
    • v.28 no.4
    • /
    • pp.556-568
    • /
    • 2007
  • Unsatisfied results of return of spontaneous circulation (ROSC) estimates were caused by the fact that the predictability of the predictors was insufficient. This unmet estimate of the predictors may be affected by transitional events due to behaviors which occur during cardiopulmonary resuscitation (CPR). We thus hypothesized that the discrepancy of ROSC estimates found in statistical characteristics due to transitional CPR events, may affect the performance of the predictors, and that the performance of the classifier dichotomizing between ROSC and No-ROSC might be different during CPR. In a canine model (n=18) of prolonged ventricular fibrillation (VF), standard CPR was provided with administration of two doses of epinephrine 0 min or 3 min later of the onset of CPR. For the analysis of the likelihood of a successful defibrillation during CPR, Support Vector Classification was adopted to evaluate statistical peculiarity combining time and frequency based predictors: median frequency, frequency band-limited power spectrum, mean segment amplitude, and zero crossing rates. The worst predictable period showed below about 1 min after the onset of CPR, and the best predictable period could be observed from about 1.5 min later of the administering epinephrine through 2.0-2.2 min. As hypothesized, the discrepancy of statistical characteristics of the predictors was reflected in the differences of the classification performance during CPR. These results represent a major improvement in defibrillation prediction can be achieved by a specific timing of the analysis, as a change in CPR transition.

Dimming Control Signal Transmisson of Electronic Ballast on the Power Line and Characteristics Measurement (전력선을 이용한 전자식 안정기 조광 신호 전송과 특성 측정)

  • 이상곤;정은택;강복연;양병렬;유홍균
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.4
    • /
    • pp.691-700
    • /
    • 1994
  • A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.

  • PDF

Variable Quad Rate ADPCM for Efficient Speech Transmission and Real Time Implementation on DSP (효율적인 음성신호의 전송을 위한 4배속 가변 변환율 ADPCM기법 및 DSP를 이용한 실시간 구현)

  • 한경호
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.18 no.1
    • /
    • pp.129-136
    • /
    • 2004
  • In this paper, we proposed quad variable rates ADPCM coding method for efficient speech transmission and real time porcessing is implemented on TMS320C6711-DSP. The modified ADPCM with four variable coding rates, 16[kbps], 24[kbps], 32[kbps] and 40[kbps] are used for speech window samples for good quality speech transmission at a small data bits and real time encoding and decoding is implemented using DSP. ZCR is used to identify the influence of the noise on the speech signal and to decide the rate change threshold. For noise superior signals, low coding rates are applied to minimize data bit and for noise inferior signals, high coding rates are applied to enhance the speech quality. In most speech telecommunications, silent period takes more than half of the signals, speech quality close to 40[kbps] can be obtained at comparabley low data bits and this is shown by simulation and experiments. TMS320C6711-DSK board has 128K flash memory and performance of 1333MIPS and has meets the requirements for real time implementation of proposed coding algorithm.

Facial Feature Retraction for Face and Facial Expression Recognition (얼굴인식 및 표정 인식을 위한 얼굴 및 얼굴요소의 윤곽선 추출)

  • 이경희;변혜란;정찬섭
    • Proceedings of the Korean Society for Emotion and Sensibility Conference
    • /
    • 1998.11a
    • /
    • pp.25-29
    • /
    • 1998
  • 본 논문은 얼굴 인식 또는 표정 인식 분야에 있어서 중요한 특징을 나타내는 얼굴과 얼굴의 주요소인 눈과 입, 눈썹의 영역 추출 및 그의 윤곽선·추출에 관한 방법을 제시한다. 얼굴요소의 영역 추출은 엣지 정보와 이진화 영상을 병합하여 이용한 프로젝션 분석을 통하여 얼굴 및 각 얼굴요소를 포함하는 최소포함사각형(MER: Minimum Enclosing Rectangle)을 추출하였다. 얼굴 영상에 관련된 윤곽선 연구에는 가변 템플릿(Deformable Template), 스네이크(Snakes: Active Contour Model)를 이용하는 연구들이 이루어지고 있는데 가변 템플릿 방법은 수행시간이 느리고 추출된 윤곽선의 모양이 획일 된 모양을 갖는 특성이 있다. 본 논문에서는 사람마다 얼굴요소의 모양의 개인차가 반영되고 빠른 수렴을 할 수 있는 스네이크 모델을 정의하여 눈, 입, 눈썹, 얼굴의 윤곽선 추출 실험을 하였다. 또한 스네이크는 초기 윤곽선의 설정이 윤곽선의 추출 곁과에 큰 영향을 미치므로, 초기 윤곽선의 설정 과정이 매우 중요하다. 본 논문에서는 얼굴 및 각 얼굴요소를 포함하는 각각의 최소 포함 사각형(MER)을 추출하고, 이 추출된 MER 내에서 얼굴 및 각 얼굴요소의 일반적인 모양을 초기 윤곽선으로 설정하는 방법을 사용하였다. 실험결과 눈, 입, 얼굴의 MER의 추출은 모두 성공하였고, 눈썹이 흐린 사람들의 경우에만 눈썹의 MER추출이 졸지 않았다. 추출된 MER을 기반으로 하여 스네이크 모델을 적용한 결과, 눈, 입, 눈썹, 얼굴의 다양한 모양을 반영한 윤곽선 추출 결과를 보였다. 특히 눈의 경우는 1차 유도 엣지 연산자에 의한 엣지 와 2차 유도 연산자를 이용한 영점 교차점(Zero Crossing)과 병합한 에너지 함수를 설정하여 보다 더 나은 윤곽선 추출 결과를 보였다. 얼굴의 윤곽선의 경우도 엣지 값과 명도 값을 병합한 에너지 함수에 의해 비교적 정확한 결과를 얻을 수 있었다.잘 동작하였다.되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol/l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol/l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into the origin of the letter designs in the Chinese character culture

  • PDF

Grand Circulation Process of Beach Cusp and its Seasonal Variation at the Mang-Bang Beach from the Perspective of Trapped Mode Edge Waves as the Driving Mechanism of Beach Cusp Formation (맹방해안에서 관측되는 Beach Cusp의 일 년에 걸친 대순환 과정과 계절별 특성 - 여러 생성기작 중 포획모드 Edge Waves를 중심으로)

  • Cho, Yong Jun
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.31 no.5
    • /
    • pp.265-277
    • /
    • 2019
  • Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.