• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.125-126
• /
• 2010

채널의 다중경로를 통과한 신호들은 지연확산 영향으로 심하게 왜곡이 되거나 Inter-Symbol Interference(ISI)가 발생하므로 왜곡된 채널을 추정하여 보상해야 한다. 기존 iterative 채널 추정 방식에서는 채널 시간 지연 길이 밖으로 zero padding함으로 노이즈 성분을 제거하는 알고리즘이다. 반면에 본 논문은 채널 시간 지연 길이 안으로 있는 노이즈 성분까지 노이즈 제거 문턱 값 추정(noise elimination threshold estimation: NETE) 알고리즘을 사용하여 노이즈를 효과적으로 제거한다. 시뮬레이션 결과는 채널의 mean square error(MSE)를 통하여 제안된 기법을 적용할 경우 채널 추정 성능 개선이 나타남을 확인할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.244-252
• /
• 2003

In this paper, we propose a new subblock division method(SDM) for PAPR reduction in the OFDM communication system. The SDM divides the OFDM symbol into the several subblocks. If the PAPR is high, the some of the data subblocks are replaced by the dummy zero padding blocks. We propose SDM 1 and SDM 2 according to the structure. Even though the transmission efficiency may be partially lowered, the proposed SDM can considerably reduce the computational burden while maintaining similar PAPR reduction performance, compared with the PTS which is known to be the best in the conventional methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.317-322
• /
• 1994

본 연구에서는 원통면 음향 홀로그래피 방법에 대한 세밀한 고찰을 통하여 이 방법을 이용한 음장예측의 실제 적용에 도움을 주고자 한다. 먼저 원통면 음향 홀로그래피 방법의 기본적인 이론에 대한 고찰을 하였고, 원통면 음향 홀로그래피 방법의 실제 적용시 나타나는 창문함수의 영향(window effect)이나 공간상의 엘리어싱(spatial aliasing), 둘러싸기 오차(wraparound error)와 같은 오차에 대하여 모의 실험을 통하여 살펴보았다. 이러한 오차해석을 통하여 가능한 한 오차를 줄이고 신뢰할 수 있는 예측결과를 얻을 수 있는 측정조건을 제시하였으며, 오차를 감소시킬수 있는 Tukey 창문함수의 사용과 제로패딩(zero padding) 방법을 제시하였다. 이러한 기본적인 이해를 바탕으로 원통형 구조물의 방사음장을 예측하는 실험을 하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.211-214
• /
• 1998

TCM(Trellis-Coded Modulation)은 대역폭과 전력이 제한된 채널환경에서 채널부호화 기술과 변조기술을 결합시켜 대역폭의 증가없이 에러정정능력을 개선시키는 통신 기술이다. 본 논문에서는 TCM 신호의 복호시 사용되는 Viterbi decoder에서 traceback depth의 감소에 따른 BER(Bit Error Rate)의 증가를 개선하기 위해 수신부에서 설정하는 traceback depth를 주기로 blocking하여 TCM encoder의 입력시퀀스에 zero padding bits를 추가시키는 새로운 알고리듬을 제안한다. 모의실험결과, traceback depth가 50인 hard decision의 경우 약 2~2.5dB, 4-level soft decision과 8-level soft decision의 경우 약 0.3~2dB의 coding gain을 얻을 수 있었다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.57-58
• /
• 2005

Recently the telematics system is used widely. Users want to high quality communications. Since the primary advantage of using an array is to enhance a desired signal and reject jamming interferences, array signal processing is essential to satisfy unmet demand of user. In general, beamforming is a spatial filtering operation performed on the data received by an array of sensors. So we propose the beamformer design that use FPGA for real time processing. And we use zero-padding interpolation for high resolution data.

• Journal of Mechanical Science and Technology
• /
• v.17 no.2
• /
• pp.197-206
• /
• 2003

It is intended to retrieve the time history of displacement from measured acceleration signal. In this study, the word retrieving means reconstructing the time history of original displacement signal from already measured acceleration signal not just extracting various information using relevant signal processing techniques. Unlike extracting required information from the signal, there are not many options to apply to retrieve the time history of displacement signal, once the acceleration signal is measured and recorded with given sampling rate. There are two methods, in general, to convert measured acceleration signal into displacement signal. One is directly integrating the acceleration signal in time domain. The other is dividing the Fourier transformed acceleration signal by the scale factor of - $\omega$$^2$and taking the inverse Fourier transform of it. It turned out both the methods produced a significant amount of errors depending on the sampling resolution in time and frequency domain when digitizing the acceleration signals. A simple and effective way to convert the time history of acceleration signal into the time history of displacement signal without significant errors is studied here with the analysis on the errors involved in the conversion process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.294-302
• /
• 2008

In this paper, we present a new image up-sampling method which registers low resolution images to the high resolution grid when Bayesian super-resolution image processing is performed. The proposed up-sampling method interpolates high-resolution pixels using high-frequency data lying in all the low resolution images, instead of up-sampling each low resolution image separately. The interpolation is based on B-spline non-uniform re-sampling, adjusted for the super-resolution image processing. The experimental results demonstrate the effects when different up-sampling methods generally used such as zero-padding or bilinear interpolation are applied to the super-resolution image reconstruction. Then, we show that the proposed hybird up-sampling method generates high-resolution images more accurately than conventional methods with quantitative and qualitative assess measures.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.109-110
• /
• 2007

본 논문에서는 베이시안 초해상도 영상처리시 저해상도 영상들을 고해상도 격자에 맞게 정합해서 업샘플링(upsampling)을 하는 새로운 방식에 대해 제안한다. 제안하는 업샘플링 방식은 각 장을 따로 보간하는 방식과 달리 여러 저해상도 영상의 고주파 정보가 고해상도 영상 격자의 모든 위치에 적절히 영향을 미칠 수 있도록 여러 장의 저해상도 영상의 고주파 정보를 함께 사용하여 보간한다. 보간하는 방법은 B-스플라인 (B-Spline) 기반 비정규 리샘플링(non-uniform resampling)을 기반으로 초해상도 영상처리에 맞도록 적용한다. 실험결과를 통해 일반적으로 적용되는 0-삽입(zero-padding) 업샘플링 방식과 쌍일차 보간법(bilinear interpolation) 등을 적용할 때의 효과를 살펴보고, 제안하는 방식이 일반적인 방식을 사용하는 것에 비해 정량적, 정성적으로 고해상도 정보를 더 정확히 생성해내는 것을 확인한다.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.59-65
• /
• 2023

A GNSS receiver must perform signal acquisition to estimate the code phase and Doppler frequency of the incoming satellite signals, which are essential information for baseband signal processing. Modernized GNSS signals have different modulation schemes and long PRN code lengths from legacy signals, which makes it difficult to acquire the signals and increases the computational complexity and time. This paper proposes a novel FFT/Inverse-FFT with baseband resampling to resolve the aforementioned challenges. The suggested algorithm uses a single block only for the FFT and thereby requires less hardware resources than conventional structures such as Double Block Zero Padding (DBZP). Experimental results based on a MATLAB simulation show this algorithm can successfully acquire GPS L1C/A, GPS L2C, Galileo E1OS, and GPS L5.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.268-274
• /
• 2016

To find the location of a random noise source present in the three-dimensional space is required at least four microphones. Using four microphones distributed in a three-dimensional space, noise source imaging technique was applied and evaluated on their performance. To compensate resolution problem which comes from both the position of the sensor array is fixed and the sampling frequency is low, up-sampling technique and interpolation function were applied. Five different interpolation methods were applied such as zero-padding, zero-order hold, first-order hold, spline function, and random signal padding. The up-sampling rate were chosen by two, four, eight times, and counting up 16 times. As a result, it was possible to more accurately estimate the position of the noise source according to the higher of the up-sampling rate. It also found that the first-order hold and the spline function's performance were slightly falling relative to other methods.