• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.211-213
• /
• 1999

This paper describes a new method for source current optimization of the electromagnetic devices. In a conventional method of current distribution optimization using design sensitivity based on a finite element method, position and width of coils are generally optimized under condition that shape of those is given. they cannot find the global minimum because the number of coils is pre-determined. To avoid this local minimum, source current region which is discretized uniformly is considered as design parameter. This discretized regions have zero or one current value during the optimization process. The proposed method is applied to magnetic resonance imaging(MRI) magnet.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.185-189
• /
• 2003

The purpose of this study is to obtain the optimal operating condition of conduction cooled taper shape high-temperature superconductor (HTS) current lead operated in current sharing mode. In our previous study, we discovered that the optimal operating condition of constant cross-section area HTS current lead is in the current sharing state, and in optimal condition, the temperature gradient at warm end is not zero. The analysis result of taper HTS current lead is quiet similar to the constant area HTS current lead. The minimum dissipation of taper HTS current lead is not influenced by taper angle, however the optimal operation condition is varied with taper angle.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.933-941
• /
• 1997

In the analysis of thin elastic structures such as plate and shell-like structures, classical lower-order theories like Kirchhoff and Reissner-Mindin theories are insufficient to describe the behavior of such structures in the region where the state of stresses is complex. On the other hand, the fully three dimensional theory of linear elasticity can provide desired analysis accuracy, but requires expensive computational implementation compared to the classical theories. This paper is concerned with the development of hierarchical models for elastic structures which can be used for hierarchical modeling for the analysis of such structures. Derivation and limit model analysis (when the thickness of structures tends to zero) of hierarchical models are presented together with a introduction of modeling error estimation. Also, numerical results supporting theoretical results are given.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.382-391
• /
• 2008

A simple analytical model of rarefied channel flow is developed to predict the compression ratio in a helical drag pump. If the surface velocity is zero, the model reduces to a capillary leaks. Predictions of our model agree well with the Knudsen's data for capillary leaks in transition flow, in addition to giving a good account of the Knudsen minimum. Also, the present results are compared with experimental data, and good agreement is obtained over the entire pressure range from molecular to slip flow.

• ETRI Journal
• /
• 제35권4호
• /
• pp.578-586
• /
• 2013

Using a sub-terahertz (sub-THz) wave generated using a photonics-based technology, a high-speed wireless link operating at up to 10 Gbps is designed and demonstrated for realization of seamless connectivity between wireless and wired networks. The sub-THz region is focused upon because of the possibility to obtain sufficient bandwidth without interference with the allocated RF bands. To verify the high-speed wireless link, such dynamic characteristics as the eye diagrams and bit error rate (BER) are measured at up to 10 Gbps for non-return-to-zero pseudorandom binary sequence $2^{31}-1$ data. From the measurement results, a receiver sensitivity of -23.5 dBm at $BER=10^{-12}$ is observed without any error corrections when the link distance between the transmitter and receiver is 3 m. Consequently, we hope that our design and experiment results will be helpful in implementing a high-speed wireless link using a sub-THz wave.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.1-8
• /
• 2016

Dead time is typically incorporated in voltage source inverter systems to prevent short circuit cases. However, dead time causes an error between the output voltage and reference voltage. Hence, voltage equation-based algorithms, such as motor parameter estimation and back electromotive force (EMF)-based sensorless algorithms, are prone to estimation errors. Several dead-time compensation methods have been developed to reduce output voltage errors. However, voltage errors are still common in zero current crossing areas, and an effect of the error is much worse in a low speed region. Therefore, employing voltage equation-based algorithms in low speed regions is difficult. This study analyzes the conventional dead-time compensation method and output voltage errors in low speed operation areas. A current shaping method that can reduce output voltage errors is also proposed. Experimental results prove that the proposed method reduces voltage errors and improves the accuracy of the parameter estimation method and the performance of the back EMF-based sensorless algorithm.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.403-408
• /
• 2013

본 논문은 EDISON_CFD를 이용하여 관상동맥 분지관에서 점도에 따른 유체의 유동현상에 관하여 연구를 하였다. 뉴턴유체인 물의 점성계수 일때와 비뉴턴유체인 혈액의 Carreau model에서의 영전단율 점성계수(${\eta}_0$)와 무한전단율 점성계수(${\eta}_{\infty}$)일 때의 유동현상을 살펴보았다. 그 결과 점도가 증가할수록 재순환 영역에서 유체의 속도가 감소하였고 CF 및 CP값이 감소하는 구간의 수가 증가하여 벽면의 저전단응력으로 인해 생기는 재순환영역의 수가 증가하는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2383-2385
• /
• 2005

In this paper we discuss the design and fabrication of two millimeter wave filters, in bandpass and bandstop topologies for wireless communications applications. The filters are made using a high Q MMIC transmission line, which consists of a 100 micrometers tall, surface micromachined, air filled inverted microstrip structure on a quartz substrate, made by using a JSR THB-151N negative photoresist sacrificial layer mold and electroplating technology. The filter topologies include a new, very compact, four pole, cross-coupled filter, that presents a single transmission zero at the lower side of the passband, which provides a very sharp out of passband rejection at this region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1081-1083
• /
• 2003

In this paper, a new speed sensorless induction motor scheme which can work at any speed including the zero speed is presented. The proposed method is robust to secondary resistance variations. Simultaneous estimation of speed and secondary resistance are realized based on a feedforward type torque control scheme. The secondary flux with a low frequency sinusoidal waveform is used to help the estimation. Simulations results supported by experiments are given to show the effectiveness of this method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.350-352
• /
• 1996

A Hight Efficiency Quasi-Parallel Resonant DC-Link Inverter which shows highly improved PWM capability, low loss characteristic and low voltage stress is presented. A method to minimize freewheeling interval, which is able to largely decrease DC-link operation losses and to steadily guarantee soft switching in the wide operation region is proposed. Analysis and simple experiments were performed to verify validity of the proposed inverter topology.