• 인간식물환경학회지
• /
• 제24권5호
• /
• pp.519-527
• /
• 2021

Background and objective: This study was conducted to establish a Plant Hardiness Zone (PHZ) map, investigate the effect of global warming on changes in PHZ, and elucidate the difference in the distribution of evergreen trees between the central and southern region within hardiness Zone 7b in Korea. Methods: Mean annual extreme minimum temperature (EMT) and related temperature fluctuation data for 40 years (1981 to 2020) in each of the meteorological observation points were extracted from the Open MET Data Portal of the Korea Meteorological Administration. Using EMT data from 60 meteorological observation points, PHZs were classified according to temperature range in the USDA Plant Hardiness Zone Map. Changes in PHZs for each decade related to the effects of global warming were analyzed. Temperature fluctuation before and after the day of EMT were analyzed for 4 areas of Seoul, Suwon, Suncheon, and Jinju falling under Zone 7b. For statistical analysis, descriptive statistics and ANOVA were performed using the IBM SPSS 22 Statistics software package. Results: Plant hardiness zones in Korea ranged from 6a to 9b. Over four decades, changes to warmer PHZ occurred in 10 areas, especially in colder ones. Based on the analysis of daily temperature fluctuation, the duration of sub-zero temperatures was at least 2 days in Seoul and Suwon, while daily maximum temperatures were above zero in Suncheon and Jinju before and after EMT day. Conclusion: It was found that the duration of sub-zero temperatures in a given area is an important factor affecting the distribution of evergreen trees in PHZ 7b.

• 한국해양학회지:바다
• /
• 제26권4호
• /
• pp.291-306
• /
• 2021

Coupled Climate Model Inter-comparison Project Phase 6에 참여한 21개의 모형들의 기후변화 시나리오 실험 결과로부터 북서태평양 해면수온과 쿠로시오의 미래변화를 분석하였다. 해면수온 상승의 공간적인 특징은 쿠로시오의 공간적인 분포와 유속의 변화와 관련된 것으로 파악되었다. 북태평양에서 아열대 순환계와 아한대 순환계의 경계를 따라 흐르는 쿠로시오 확장역의 위치 변화와 지구온난화에 따른 대규모 대기순환과의 관계를 알아보기 위해 21개 모형 중 9개의 모형들의 기후변화 실험별로 zero-바람회전응력이 나타나는 위도를 비교하였다. 온실기체의 증가로 대기복사강제력이 커짐에 따라 zero-바람회전응력이 나타나는 위도가 북상하는 것을 확인하였으며, 이는 관측에서 나타난 zero-바람회전응력이 나타나는 위도가 북상하는 추세와 일치하는 결과이다. 이러한 결과는 지구온난화로 인해 해들리순환이 북쪽으로 확장함에 따라 한반도가 속한 중위도의 온난화가 가속될 수 있음을 나타낸다. 대한해협을 통해 동해로 유입되는 대마난류의 수송량과 온도 또한 대기복사강제력이 커짐에 따라 증가하였다.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.27-36
• /
• 2002

AUSM계열 수치기법의 수치적 불안정성에 대한 원인과 해결방안에 대한 연구를 수행하였다. Euler 유동에서 수치적 불안정성은 제어면에 수직한 방향의 유동속도가 영인 영역에서 발생하며 이 영역에서 Eule r 방정식은 근본적으로 부정해를 가지게 되어 무수히 많은 해를 가지게 된다. 지배방정식 자체로는 유일해를 찾는 것이 불가능하고 주위의 유동조건이나 외부교란에 의해 유일해를 결정하게 된다. 이러한 특징은 충격파 영역에서 교란이 존재할 경우 초기 상태에 대한 정보를 상실하게 되어 충격파 불안정성을 유발하게 된다. slip유동을 정확히 계산할 수 있는, 즉 유일해를 결정할 수 없는, 수치기법은 충격파 불안정성을 근본적으로 제거할 수 없다.

• Korea-Australia Rheology Journal
• /
• 제19권4호
• /
• pp.201-209
• /
• 2007

The present paper is concerned with non-isothermal spherical Couette flow of Oldroyd-B fluid in the annular region between two concentric spheres. The inner sphere rotates with a uniform angular velocity while the outer sphere is kept at rest. Moreover, the two spherical boundaries are maintained at fixed temperature values. Hence, the fluid is effect by two heat sources; namely, the viscous heating and the temperature gradient between the two spheres. The viscoelasticity of the fluid is assumed to dominate the inertia such that the latter can be neglected. An approximate analytical solution of the energy and momentum equations is obtained through the expansion of the dynamical fields in power series of Nahme number. The analysis show that, the temperature variation due to the external source appears in the zero order solution and its effect extends to the fluid velocity distribution up to present second order. Viscous heating contributes in the first and second order solutions. In contrast to isothermal case, a first order axial velocity and a second order stream function fields has been appeared. Moreover, at higher orders the temperature distribution depends on the gap width between the two spheres. Finally, there exist a thermal distribution of positive and negative values depend on their positions in the domain region between the two spheres.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권3호
• /
• pp.148-156
• /
• 2015

Deck plates of ships or offshore structures would make out-of-plane distortion for their thin thickness. These distortions are usually straightened by thermal straightening such as flame heating method. After thermal straightening, the blocks are lifted and moved by cranes to assemble it at dry-dock stage. After this lifting process, out-of-plane deformation again happens frequently. And then, they continuously cause quality and accuracy problems in the final dry-dock process. So, it takes more time for repair and correction working. According to preceding research, the lifting process by cranes would offset the effect on thermal straightening. The target of this study is to develop a methodology analyzing the remaining efficiency of thermal straightening after block lifting. The development was based on the assumption of yield state at straightening region. Therefore the remaining efficiency was obtained by different stiffness slope while lifting & relieving. The efficiency formula was designed using inherent strain, and we made a table of zero-efficiency by cooling speed and class rule's steels. As a result, if the stress orthogonal to straightened line is calculated during lifting analysis by FEA, the efficiency can be obtained linearly to the values in the table. Finally, even optimized carling position can be designed by considering the regional data from series project and welding region on deck.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권9호
• /
• pp.552-561
• /
• 2004

This paper is concerned with a new speed sensorless induction motor scheme which can be successfully applied to at any speed including even zero speed. The proposed method is robust against rotor resistance variations. In addition, simultaneous on-line estimations of speed and rotor resistance are realized based on a feedforward type torque control approach. The rotor flux with a low frequency sinusoidal waveform has been utilized to help the simultaneous estimation for both speed and rotor resistance. The control scheme has no current minor loop to determine voltage references. Since the proposed estimation does not depend on any derivative terms of currents and stator voltages, it offers a good performance at extremely low speed region for sensorless induction motor. Furthermore, the proposed control is simply using motor parameters and stator currents without determining any PI gains for current feedback and any signal injection for the rotor resistance estimation. Finally, both simulation and experimental results are given to show the effectiveness of this method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.394-397
• /
• 2006

Gridded products of surface wind/wind-stress over the world ocean have been constructed by using satellite scatterometer as the Japanese Ocean Flux data sets with Use of Remote-sensing Observation (J-OFURO) data. Our previous validation study in the tropical Pacific using TAO/Triton and NDBC buoys revealed high reliability of our products. In this study, the Kuroshio Extension Observatory (KEO) buoy data are used for validation of other gridded wind-stress products including the NCEP-1 and 2 in the western North Pacific region where there have been few in-situ data. Results reveal that our J-OFURO product has almost zero mean difference and smallest root-mean-square (RMS) difference, while the NCEP-1 and 2 ones significantly positive biases and relatively high RMS difference. Intercomparison between the J-OFURO and NCEP products in a wide region of the North Pacific covered by the westerly winds exhibits that the NCEPs have larger magnitudes in the wind stress than the J-OFURO's, suggesting overestimation of the NCEPs.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.23-27
• /
• 2015

Quadruple magnet is an essential component for the accelerator, and the field uniformity in the good field region reflects the quality of quadruple magnet. In this paper, the total magnetic field B was separated into the coil-induced magnetic field $B_s$ and the iron-induced magnetic field $B_c$ to explain why the total magnetic field B has some inhomogeneity. Using Fourier analysis, harmonic components of $B_s$, $B_c$ and B have been analyzed at good field region, respectively. The harmonics of multipole magnet and Fourier analysis are helpful to show the uniformity of magnetic field. Several geometries of yoke and coils were defined to analyze the effect on field uniformity of an HTS quadruple magnet. By the analysis, it was found that the sixth harmonics which is the main factor of field inhomogeneity can be reduced to zero. It means that the sixth harmonics of the magnetic field B can be removed by adjusting the geometry of the magnet pole and the position of coils. We expect that this result can effectively improve the uniformity of an HTS quadruple magnet.

• 전력전자학회논문지
• /
• 제12권5호
• /
• pp.378-385
• /
• 2007

AC PDP(Plasma Display Panel)는 소비전력이 크고 유지구동전압이 높다는 단점이 있다. 이런 단점을 개선하기 위하여 에너지 회수회로를 설치하고 유지구동전압을 낮춘 회로가 제안되었다. 그러나 이 회로는 방전유지 구간 시작 시점에서 패널의 전압이 방전유지구동전압보다 낮기 때문에 스위칭소자들이 하드 스위칭 동작을 하는 단점이 있다. 본 논문에서는 CIM(Current Injection Method)을 이용하여 미리 인덕터에 전류를 흘려주어 방전유지 구간 시작 시점에서도 스위칭소자들이 영전압 스위칭동작을 하여 전 구간에서 영전압 스위칭 또는 영전류 스위칭동작을 할 수 있는 새로운 구동방식을 제안한다. 그리고 회로를 해석하여 CIM 구간을 설계하고 시뮬레이션과 실험을 통하여 유용성을 입증하였다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1057-1063
• /
• 1994

An instantaneous frequency analysis is a technique to examine a signature for the rotating machinery if the signal has several transitions within a cycle. This paper discusses the conditions of existing negative frequency components in the instantaneous frequency. By using a signal consisted of two frequency components, the instantaneous frequency analysis is conducted while the amplitude ratio between two frequency components has been changed. The analysis shows that, depending on the amplitude ratio, the instantaneous frequencies have averaged, zero-valued, or negative components. It turns out that the negative-valued instantaneous frequencies, which have been regarded as the noise effect, are the consequence of the calculation process for the multisignal components. The criteria of existing the negative values in instantaneous frequencies is given in terms of the relative amplitude ratio and the frequency difference. Especially when the amplitude ratio approaches to 1, the instantaneous frequency fluctuates ${\pm}\infty$ in theory, which implies that instantaneous frequency has unstable region around the amplitude ratio, 1.Also, as the frequency difference between major signal components is increased, the region of existing negative instantaneous becomes broader. In an instantaneous frequency analysis, therefore, a narrow band analysis is suggested, with extreme care if the amplitude ratio approaches to 1. In this paper, a vibration signal monitored from a rotating machinery is also examined as an application example in order to show the existence of negative instantaneous frequencies components.