• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.83-85
• /
• 2011

This study investigated the results of insulation heat curing method using double layer bubble sheet in concrete in cold weather environment. First of all, when double bubble sheets are applied, it was shown that concrete was protected from early freezing by remaining between 7℃ and 3℃ even in case outside temperature drops -7℃ below zero until the 3d day from piling. The insulation heat preservation curing method using the double bubble sheet applied in this field prevented early freezing owing to stable curing temperature management, deterring concrete strength development delay at low temperature, and obtained the needed strength. Also, it was proven that the method is highly effective and economic for cold weather concrete quality maintenance through curing cost reduction like construction period shortening and labor cost reduction, etc by reducing the process of temporary equipment installation and disassembling.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.31-32
• /
• 2007

Built-in voltage in organic light-emitting diodes was studied using modulated photocurrent technique ambient conditions. A device was made with a structure of anode/$Alq_3$/cathode to study a built-in voltage. An ITO was used as an anode, and $Li_2O$/Al was used as a cathode. From the bias voltage-dependent photocurrent, built-in voltage of the device is determined. The applied bias voltage when the magnitude of modulated photocurrent is zero corresponds to a built-in voltage. Built-in voltage in the device is generated due to a difference of work function of the anode and cathode. It was found that for 0.5nm thick $Li_2O$ layer built-in voltage is the higher than the others. It indicates that a very thin alkaline metal compound $Li_2O$ lowers an electron barrier height.

• 한국소음진동공학회논문집
• /
• 제22권6호
• /
• pp.524-534
• /
• 2012

In order to predict trailing edge noise from a flat plate more effectively and accurately, the prediction algorithm based on semi-analytic model for point pressure spectrum is proposed. The semi-analytic model consists of empirical models for point pressure spectra and theoretical model to determine the boundary layer characteristics needed for the empirical models. The proposed methods are applied to predict the trailing edge noise of the flat plate located in the mean flow of speed 38 m/s, for which the measured data are available. In present study, six empirical models for point pressure spectra are utilized for the predictions of trailing edge noise and their prediction results are compared to the measured data. Through the analysis of these comparisons, it is revealed that the present method based on non-frozen formula using Efimtsov model and Smol'yakov-Tkachenko model can provide more accurate and efficient predictions of trailing edge noise.

• Journal of Magnetics
• /
• 제5권4호
• /
• pp.139-142
• /
• 2000

The interlayer coupling between adjacent ferromagnetic layers was examined for CoFe/Cu/NiFe trilayer systems. A series of films of CoFe (20 nm)/Cu($t_{cu}$)/NiFe (20 nm) trilayers with Cu spacer thickness, $t_{cu}$, in the range of 1~10 m was deposited on Si(100) wafers at room temperature by DC magnetron sputtering. In order to understand the dependence of the magnetic interaction between ferromagnetic $Co_{90}Fe_{10}$ (wt.%) and $Ni_{81}Fe_{19}$ (wt.%) layers separated by a nonmagnetic Cu spacer on the Cu layer thickness, we investigated the derivative ferromagnetic resonance (FMR) spectra. The FMR results were analyzed using the model of Layadi and Art-man for interlayer interaction. The interlayer coupling constant decreases in an oscillatory manner as the Cu spacer thickness increases up to 10 nm and approaches zero above 10 nm. The interlayer coupling constant is positive for all samples. Hence, it seems that the exchange coupling between adjacent CoFe and NiFe layers separated by a Cu layer is ferromagnetic.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권1호
• /
• pp.136-141
• /
• 2022

A very complex task in deep learning such as image classification must be solved with the help of neural networks and activation functions. The backpropagation algorithm advances backward from the output layer towards the input layer, the gradients often get smaller and smaller and approach zero which eventually leaves the weights of the initial or lower layers nearly unchanged, as a result, the gradient descent never converges to the optimum. We propose a two-factor non-saturating activation functions known as Bea-Mish for machine learning applications in deep neural networks. Our method uses two factors, beta (𝛽) and alpha (𝛼), to normalize the area below the boundary in the Mish activation function and we regard these elements as Bea. Bea-Mish provide a clear understanding of the behaviors and conditions governing this regularization term can lead to a more principled approach for constructing better performing activation functions. We evaluate Bea-Mish results against Mish and Swish activation functions in various models and data sets. Empirical results show that our approach (Bea-Mish) outperforms native Mish using SqueezeNet backbone with an average precision (AP50val) of 2.51% in CIFAR-10 and top-1accuracy in ResNet-50 on ImageNet-1k. shows an improvement of 1.20%.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.511-529
• /
• 2023

This paper aims to better understand the bonding behavior in Reinforced Concrete beams strengthened with an Ultra-High Performance Fiber Reinforced Concrete (RCUHPFRC) layer on the compression side using experimental tests and numerical analyses. The UHPFRC mix design was obtained through an optimization procedure, and the characterization of the materials included compression and slant shear tests. Flexural tests were carried out in RC beams and RC-UHPFRC beams. The tests demonstrated a debonding of the UHPFRC layer. In addition, 3D finite element analyses were carried out in the Abaqus CAE program, in which the interface is modeled considering a zero-thickness cohesive-contact approach. The cohesive parameters are investigated, aiming to calibrate the numerical models, and a sensitivity analysis is performed to check the reliability of the assumed cohesive parameters and the mesh size. Finally, the experimental and numerical values are compared, showing a good approximation for both the RC beams and the RC strengthened beams.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.517-530
• /
• 2024

This paper presents a new four-unknown equivalent single layer (ESL) refined plate theory for the buckling analysis of functionally graded (FG) rectangular plates with all simply supported edges and subjected to in-plane mechanical loading conditions. The present model accounts for a parabolic variation of transverse shear stress over the thickness, and accommodates correctly the zero shear stress conditions on the top and bottom surfaces of the plate. The material properties are supposed to vary smoothly in the thickness direction through the rules of mixture named power-law gradation. The governing equilibrium equations are formulated based on the total potential energy principle and solved for simply supported boundary conditions by implementing the Navier's method. A numerical result on elastic buckling using the current theory was computed and compared with those published in the literature to examine the accuracy of the proposed analytical solution. The effects of changing power-law exponent, aspect ratio, thickness ratio and modulus ratio on the critical buckling load of FG plates under different in-plane loading conditions are investigated in detail. Moreover, it was found that the geometric parameters and power-law exponent play significant influences on the buckling behavior of the FG plates.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1514-1519
• /
• 2001

This paper is concerned with design, manufacturing and performance test of LIPCA ( Lightweight Piezo- composite Curved Actuator) using a top carbon fiber composite layer with near -zero CTE(coefficient of thermal expansion), a middle PZT ceramic wafer and a bottom glass/epoxy layer with high CTE. The main point of this design is to replace the heavy metal layers of THUNDER by thigh tweight fiber reinforced plastic layers without losing capabilities to generate high force and large displacement. It is possible to save weight up to about 30% if we replace the metallic backing material by the light fiber composite layer. We can also have design flexibility by selecting the fiber direction and the size of prepreg layers. In addition to the lightweight advantage and design flexibility, the proposed device can be manufactured without adhesive layers when we use epoxy resin prepreg system. Glass/epoxy prepregs, a ceramic wafer with electrode surfaces, and a graphite/epoxy prepreg were simply stacked and cured at an elevated temperature (177 $^{circ}C$ after following an autoclave bagging process. It was found that the manufactured composite laminate device had a sufficient curvature after detached from a flat mold. The analysis method of the cure curvature of LIPCA using the classical lamination theory is presented. The predicted curvatures are fairly in agreement with the experimental ones. In order to investigate the merits of LIPCA, a performance test of both LIPCA and THUNDE$^{TM}$ were conducted under the same boundary conditions. From the experimental actuation tests, it was observed that the developed actuator could generate larger actuation displacement than THUNDERT$^{TM}$.

• 폴리머
• /
• 제28권4호
• /
• pp.335-343
• /
• 2004

카뮤스틴 (1,3-bis(2-chloroethy1-nitrosourea, BICNU)은 뇌종양 치료를 위하여 임상적으로 사용되는 약물로 짧은 생물학적 반감기를 가지고 있어 장기방출에 적합하지 않다. 하지만, poly(D,L-lactide-co-glycolide) (PLGA)는 벌크 분해 특성으로 인해 약물의 장기방출에 유용하며, PLGA의 유도체인 글리콜라이드 단량체는 독성이 없고 PLGA와 유사한 생분해성을 가지고 있어 BICNU의 방출조절에 이용된다. 이 실험에서 BICNU를 함유한 PLGA 웨이퍼는 일반적인 직접압축법에 의해 제조한 후 BICNU의 방출거동과 웨이펴의 분해속도를 전자주사현미경, 핵자기공명장치 그리고 젤투과크로마토그래피를 통해 관찰하였다. 또한, 글리콜라이드 단량체의 함량변화에 따른 다중층 웨이퍼를 제조하여 단일층 웨이퍼와의 방출거동을 비교하였다. 이러한 결과들로부터 BICNU를 함유한 PLGA 웨이퍼의 약물방출은 BICNU와 글리콜라이드 단량체의 함량이 증가할수록 증가하였고, 다중층 웨이퍼에서 외부층의 글리콜라이드 단량체와 BICNU가 약물방출 거동과 분해속도에 영향을 미친다는 것을 확인하였다.

• 한국식생활문화학회지
• /
• 제8권3호
• /
• pp.249-255
• /
• 1993

고추장을 직립성 용기에 담아 숙성보관시 곱이 발생하는 것을 방지하기 위하여 햇빛을 쪼여 표면을 관리하는 것이 일반적이나 이 경우 표면층 고추장이 건조되고, 적색이 흑변되고, 유동성이 상실되며, 과염도 및 이물질 오염 등으로 인하여 많은 양이 비가식화되는 문제가 있어 왔다. 숙성 보관중 표층 고추장의 악변에 의한 손실을 최소화할 수 있는 숙성 조건을 조사하기 위하여 표면을 3가지 방법(무처리, 소금뿌림, PE-film덮기)으로 처리한 후 각각 햇빛을 쪼이면서 숙성한 경우(A, B, C)와 A, B, C와 같이 처리한 후 뚜껑을 덮어 숙성(A', B', C')시키면서 15일 간격으로 수분, 염도, pH, 점도, 퍼짐성(찍음성), 색도, 곱의 발생유무를 조사 비교하였다. 2일에 1회 햇빛을 쪼이면서 120일간 숙성시킨 경우(A, B, C)곱은 발생되지 않았으나 수분함량 감소$(59%{\rightarrow}21-29%)$, 적색도 감소 내지는 흑색화$(21{\rightarrow}0-1)$, 퍼짐성 감소, 굳기 증가$(20{\;}g{\rightarrow}380{\;}g)$ 및 과염도화$(8-18%{\rightarrow}18-30%)$ 등으로 많은 양이 비가식화되는 문제가 발생하였다. 반면 뚜껑을 덮어 숙성시킨 경우 적색도, 염도, 퍼짐성, 굳기는 양호하게 유지되었으나 PE-film을 사용한 경우를 제외하고 곱이 많이 발생되어 PE-film을 덮어 숙성시키는 것이 고추장 표면을 건전하게 관리하는데 효과적인 방법으로 확인되었다.