• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.561-569
• /
• 1999

최근에 유도 전동기의 고효율 구동을 위하여 ZVT(Zero Voltage Transition) 언버터에 대한 연구가 활발히 진행되고 있으며 또한 많은 토폴로지가 제안되었다. 하지만 기존의 ZVT 인버터는 보조공진 회로부분에 과도한 컴포년트의 추가사용으로 인하여 가격상승 및 제어회로가 복잡해지는 문제점이 있다. 이의 문제점을 해결하기 위하여 본 연구에서는 보조 공진 수위치 하나만을 사용하는 다이오드 브릿지-타입 ZVT 인버터를 제안하고, 이의 동작을 이론적으로 해석하였으며, ZVT용 보조공진회로의 설계 방법에 대하여 논하였다. 또한 제안된 ZVT 인버터가 최적의 조건으로 구동하기 위한 공진기간 가변제어에 대해 논의하고 이의 유용성을 시뮬레이션 및 실험을 통하여 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.213-215
• /
• 2002

This paper presents grid connected photovoltaic inverter system using a new Zero-Current-Transition(ZCT) technique. The main switches of the proposed grid connected inverter are turned off under the zero current condition by operating the auxiliary circuit and also all semiconductor devices, switches and diodes, are applied to low rated voltage regardless of the load condition. In additionally, the proposed ZCT scheme has advantages, which are without the additional current stresses and the conduction losses on the main switches during the resonance period of the auxiliary circuit. The simulation was performed to verify the validity of the proposed grid connected photovoltaic ZCT inverter system.

• 전력전자학회논문지
• /
• 제7권2호
• /
• pp.129-136
• /
• 2002

최근에 전력계통의 안정 및 고품질화에 대한 요구가 증대되기 시작하였고, 이에 따라 향상된 전력변환기술과 대체에너지원을 이용한 계통연계형 시스템에 대한 연구가 활발히 진행되고 있다 이러한 시스템에서의 인버터의 효율은 매우 중요하다. 따라서 본 논문에서는 이러한 계통연계형 시스템을 고효율화 하기 위한 방법으로 소프트-스위칭 기법이 적용 가능한 전류제어형 인버터를 제안하였다. 또한, 소프트-스위칭 기법을 적용할 수 있는 전류제어 알고리즘과 ZVT 동작원리를 이론적으로 해석하였고 이의 유용성을 시뮬레이션과 실험을 통하여 입증하였다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.892-904
• /
• 2017

A design of a Class-E inverter with only one inductor and one capacitor is presented. It is operated at the optimal operation mode for domestic cooker. The design principle is based on the zero-voltage derivative switching (ZVDS) of the Class-E inverter with a parallel load network, which is a parallel resonant equivalent circuit. An induction load characterization is obtained from a large-signal excitation test bench, which is the key to an accurate design of the induction cooker system. Consequently, the proposed scheme provides a more systematic, simple, accurate, and feasible solution than the conventional quasi-resonant inverter analysis based on series load network methodology. The derivative of the switch voltage is zero at the turn-on transition, and its absolute value is relatively small at the turn-off transition. Switching losses and noise are reduced. The parameters of the ZVDS Class-E inverter for the domestic induction cooker must be selected properly, and details of the design of the components of this Class-E inverter need to be addressed. A 1,200 W prototype is designed and evaluated to verify the validation of the proposed topology.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.10-13
• /
• 1998

In this paper, a control strategy of the three phase ZVT inverter for ac motor drives is proposed. The topology of ZVT inverter analyzed with a description of the control conditions dependent on the load current and MSVM(Modified Space Vector Modulation). The detailed simulation results indicate that zero-voltage operation during transition of the MSVM algorithm can be achieved.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.309-313
• /
• 2001

A single-phase bi-directional inverter with a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is proposed. It is shown that the polarized ramptime current control algorithm, a method that belongs to the family of ZACE(Zero Average Current Error) methods, is a suitable technique to integrate with a typical single-phase ZVT inverter. The proposed current control algorithm is analyzed to design the circuit with auxiliary switch which can operate with ZVT for the main power switch. The simulation results would be shown to verify the proposed current algorithm to turn the main power switch on with ZVT and to operate the inverter bi-directionally

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1215-1217
• /
• 2000

For the application of soft-switching technique to single Phase-full bridge inverter. in this paper ZCT(Zero Current Transition) and ZVT(Zero Voltage Transition) techniques proposed previously are compared and discussed the merit and demerit of both. Both have a excellency that can reduce the number of auxiliary switch and resonant circuit compared to other techniques and achive soft-switching in auxiliary switch itself. Therefore, it has enabled us to have benifits of realizing high efficiency and reliability, low EMI for high switching frequency and reducing the cost as well as size of device.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.149-152
• /
• 2001

A Single-phase bi-directional inverter Using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is Presented. It is shown that the ZACE(Zero Average Current Error) algorithm based polarized ramptime current control can provide a suitable interface between diode bridge-type resonant circuit DC link and the inverter. The current control algorithm is analyzed about how to design the circuit with analyzed switch which m ZVT operation for the main power switch The simulation and experimental results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the bi-directional inverter is operated.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.425-429
• /
• 2002

In this paper, a single-phase inverter using a diode bridge-type resonant circuit to implement ZVT(Zero Voltage Transition) switching is presented. The current control algorithm is analyzed about how to design the circuit with auxiliary switch which can ZVT operation for the main power switch. The simulation and experimental results would be shown to verify the proposed current algorithm, because the main power switch is turn on with ZVT and the hi-directional inverter is operated.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.560-567
• /
• 2000

최근 들어 인버터 에어컨과 같은 유도전동기 구동 분야에서 인버터에 역달제어회로를 부가한 PFC 인버터에 대한 논의가 활발하게 진행되고 있다. 본 연구에서는 이러한 PFC 인버터의 효율을 개선하기 위하여 ZVT 스위칭 기법을 적용하는 방법에 대하여 논하고, 이ㅡㄹㄹ 동작 모드에 따른 해석과 함께 최적의 회로를 설계하였으며, 제안된 회로를 시뮬레이션 및 실험을 통하여 그 유용성을 입증하였다.