• 문화기술의 융합
• /
• 제5권1호
• /
• pp.377-384
• /
• 2019

심각해지는 지구 온난화와 환경오염 문제에 대응하기 위해 세계적으로 자동차 배기가스와 연료효율에 대한 규제가 강화되고 있다. 이에 선진국들을 중심으로 화석연료를 사용하지 않아 공해물질을 배출하지 않는 무공해 자동차에 관한 관심이 집중되고 있으며 시장에서는 전기자동차가 기술의 발달과 정책적인 지원에 힘입어 점점 더 많은 소비자로부터 선택을 받고 있다. 내연기관과 전기모터를 같이 사용하는 과도기적 형태인 하이브리드 전기자동차의 단계를 지나 현재는 순수 전기자동차의 판매가 대세를 이루고 있다. 최근에는 또 다른 무공해 자동차인 수소 연료전지 자동차가 관심을 끌고 있고 점점 더 보급률이 높아 질 것으로 기대 된다. 본고에서는 무공해 자동차의 기술에 대해 알아보고 현재 상태와 최근의 세계적인 동향에 대해 검토해 본다. 또한 무공해자동차의 경제성에 대해서도 분석해본다.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.9-16
• /
• 2000

The growing concerns on environmental protection have been constantly demanding cleaner and more energy efficient vehicles without compromising any conveniences provided by the conventional vehicles. The recent significant advances in proton-exchange-membrane (PEM) fuel cell technology have shown the possibility of developing such vehicles powered by fuel cells. Several prototype fuel cell electric vehicles (FCEV) have been already developed by several major automotive manufactures, and all of the favorable features have been demonstrated in the public roads. FCEV is essentially a zero emission vehicle and allows to overcome the range limitation of the current battery electric vehicles. Being motivated by the laboratory and field demonstrations of the fuel cell technologies, variety of fuel cell alliances between fuel cell developers, automotive manufactures, petroleum companies and government agencies have been formed to expedite the realization of commercially viable FCEV. However, there still remain major issues that need to be overcome before it can be fully accepted by consumers. This paper describes the current fuel cell vehicle development status and the staggering challenges for the successful introduction of consumer acceptable FCEVS.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5430-5437
• /
• 2011

본 연구의 목적은 친환경 무공해 승용 차량에 적용되는 전동식 냉방시스템의 성능특성을 실차에서 확인하는 것이다. 이를 위하여 인버터로 구동되는 전동식 스크롤 압축기를 적용한 전동식 냉방시스템을 설계 및 제작하여 수소 연료전지 자동차에 설치하여 다양한 주행도로 조건에서 실험을 진행하였다. 주행조건의 변화는 시험차량에 장착된 전동식 냉방시스템의 성능에 영향을 주었으며, 고속 및 일반도로 주행조건에서 냉방시스템의 성능이 정지조건에서 냉방시스템의 성능보다 우수하게 나타났다. 또한, 외기온도가 $20.0^{\circ}C$에서 $30.0^{\circ}C$로 증가함에 따라 고내 온도는 평균 $5.2^{\circ}C$ 더 적게 감소하였다.

• 신재생에너지
• /
• 제2권2호
• /
• pp.23-27
• /
• 2006

The power split hybrid powertrain is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.547-550
• /
• 2006

The power split hybrid power train is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• 자원ㆍ환경경제연구
• /
• 제28권2호
• /
• pp.307-326
• /
• 2019

전기자동차는 수송부문의 대표적인 온실가스 및 미세먼지 감축 대책으로 손꼽히고 있다. 세계 각 국가들은 전기자동차 보급 확대를 위해 구매 보조금 및 세제 감면 등의 자원제도를 시행하고 있다. 전기자동차는 주행 중에 발생하는 환경오염물질이 없다는 점에서 무배출차량(ZEV: Zero-Emission Vehicle)로 분류되지만 이는 전기자동차에 사용되는 전력을 생산하는 과정에서 발생되는 간접적인 배출을 고려하지 않은 것이다. 따라서 전기자동차의 보급에 따른 환경적 편익 증대는 전력 믹스에 따라 달라진다. 본 논문에서는 국내의 전원 구성 환경과 향후 진행될 에너지 전환에 따른 전기자동차의 환경적 영향을 분석하였다. 상세한 대기오염물질 배출 산정을 위해 각 발전소의 시간별 오염물질 배출과 발전량 데이터를 구축하여 발전소별 발전효율 및 오염물질 배출량 저감 노력 등을 반영하였다. 분석결과 현재의 발전원별 비중에서는 전기자동차의 환경적 편익이 -0.41~10.83원/km에 불과한 것으로 분석되었다. 또한 에너지 전환 시나리오에 따른 전기자동차의 환경편익 분석결과 석탄 발전의 비중이 상당한 정도로 줄어드는 경우에만 전기자동차가 내연자동차에 비해 높은 수준의 환경 편익이 발생하는 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.86-92
• /
• 2010

The fuel is not injected when the driver doesn't push acceleration pedal of a vehicle with engine speed higher than about 1,500rpm above mid vehicle speed range. This is called "fuel-cut function" and almost every modern vehicle is equipped with this function. This is activated on downhill part of a highway most often. Therefore the vehicle-exhausted $CO_2$ can be zero in this downhill part if the driver could recognize this part of highway. We compared the vehicle-exhausted $CO_2$ emission when using fuel-cut function with the $CO_2$ mass when without using this function in this study. We found that the $CO_2$ emission reduced with fuel-cut function and measured the reduction rate of vehicle-exhausted $CO_2$ mass with this test results. The exhausted $CO_2$ mass of a passenger car(2,000cc engine volume) is reduced by 4% with this function used. This $CO_2$ reduction effect can be achieved if the downhill part of a highway is painted with a specific color. And this road painting can be included in the highway road rehabilitation policy.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.152-155
• /
• 2007

Fuel cell electric vehicles (FCEVs) using hydrogen gas are zero emission vehicles, thus emission measurement for combustion vehicles is not applicable. The hydrogen gas consumption for fuel economy will be measured by the stabilized pressure/temperature method, mass flow method and electrical current method, etc. In this research, weight method with a newly manufactured test equipment is applied to measure the hydrogen consumption because above 3-methods have a deviation. The hydrogen consumption is directly calculated by the weight differences of the external hydrogen tank before and after the chassis dynamometer test. Ultimately the fuel economy for FCEVs is obtained with a deviation less than 1% in all chassis dynamometer tests.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.740-744
• /
• 2003

The development of electric vehicle has been accelerated by the recent 'California Initiative' which has required increasing proportions of new vehicle in Los Angeles area to be ZEV(Zero Emission Vehicles) But, because skill of battery is feeble, ZEV regulation was postponed but that is by CO2 restriction and environmental pollution problem the latest because do development require. In the electric vehicle and hybrid electric vehicle, the battery ECU(Battery Management System, BMS) is very important and an essential equipment. The accurate state of charge(SOC) is required for the battery for hybrid electric vehicles. This paper proposes SOC algorithm for the HEV based on the terminal voltage. Also, designed and analyzed battery ECU to apply on HEV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.274-277
• /
• 1995

Recent environmental pollutions have intensified the need to develop zero emission vehicles. The most effect method of such solutions is EV. EV is high energy efficiency, easy to maintain, repair and is possible to make high performance control. However, because energy density of batteries is constrained and the distance covered one charge is short range. Also because EV has disadvantage of poor accelation ability, development of high performance battery is required for large scale use of EV. EV charger analogous to gas apparatus must also be developed immediately. Charger is discriminate between on-vehicle type and off-vehicle type. As off-vehicle type is able to charge fast and safe, inductive charging is considered. This paper aims to develope off-vehicle inductive charging system. Therefore, it achieved power factor correction converter, high frequency DC/AC inverter control algorithm development which gives proof validity through simulation and formulated the basic concept of high frequency transformer design for inductive charging.