• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.1-6
• /
• 2021

In the field of speech recognition, as the DNN is applied, the use of speech recognition is increasing, but the amount of calculation for parallel training needs to be larger than that of the conventional GMM, and if the amount of data is small, overfitting occurs. To solve this problem, we propose an efficient method for robust voice feature extraction and voice signal noise removal even when the amount of data is small. Speech feature extraction efficiently extracts speech energy by applying the difference in frame energy for speech and the zero-crossing ratio and level-crossing ratio that are affected by the speech signal. In addition, in order to remove noise, the noise of the speech signal is removed by removing the noise of the speech signal with an average predictive improved LMS filter with little loss of speech information while maintaining the intrinsic characteristics of speech in detection of the speech signal. The improved LMS filter uses a method of processing noise on the input speech signal by adjusting the active parameter threshold for the input signal. As a result of comparing the method proposed in this paper with the conventional frame energy method, it was confirmed that the error rate at the start point of speech is 7% and the error rate at the end point is improved by 11%.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.7-14
• /
• 2011

Power analysis attack on low-power consumed security devices such as smart cards is very powerful, but it is required that the correlation between the measured power signal and the mid-term estimated signal should be consistent in a time instant while running encryption algorithm. The power signals measured from the security device applying the random clock do not match the timing point of analysis, therefore random clock is used as counter measures against power analysis attacks. This paper propose a new constant pitch based time alignment for power analysis with random clock power trace. The proposed method neutralize the effects of random clock used to counter measure by aligning the irregular power signals with the time location and size using the constant pitch. Finally, we apply the proposed one to AES algorithm within randomly clocked environments to evaluate our method.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.192-194
• /
• 2002

We present the results on the calibration of iso-center positions using the quality assurance system established at PMRC for determination of center position in X-ray and proton irradiation fields. Details on the system are presented in another presentation in this session. The equipment in the system is mounted on a patient treatment bed in each proton exposure room, G1 or G2. A center of a stainless ball on the equipment is set at a cross of laser markers located around the iso-center and fixed on the room and on the snout in the gantry. A proton beam or an X-ray beam is exposed onto the ball through a brass collimator of 100 mm ${\times}$ 100 mm and projected onto the imaging plate set at I cm behind the ball. On the axis perpendicular to the thrust axis of the gantry on the imaging plate, a distance between a center of the collimator image and a center of the ball image varies as a cosine function of gantry angles unless the ball is set on the iso-center. An amplitude of the cosine curve shows the distance between the ball and the iso-center, an offset the offset of the collimator, and a phase shift at a zero crossing point the ball direction viewed from the iso-center. We present the relation among the iso-center position, the laser maker position, and the center of proton and X-ray irradiation fields. Its stability and its reproducibility are discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Accurate voice activity detection have a great impact on performance of speech applications including speech recognition, speech coding, and speech communication. In this paper, we propose methods for voice activity detection that can adapt to various car noise situations during driving. Existing voice activity detection used various method such as time energy, frequency energy, zero crossing rate, and spectral entropy that have a weak point of rapid. decline performance in noisy environments. In this paper, the approach is based on existing spectral entropy for VAD that we propose voice activity detection method using MFB(Met-frequency filter banks) spectral entropy, gradient FFT(Fast Fourier Transform) spectral entropy. and gradient MFB spectral entropy. FFT multiplied by Mel-scale is MFB and Mel-scale is non linear scale when human sound perception reflects characteristic of speech. Proposed MFB spectral entropy method clearly improve the ability to discriminate between speech and non-speech for various in noisy car environments that achieves 93.21% accuracy as a result of experiments. Compared to the spectral entropy method, the proposed voice activity detection gives an average improvement in the correct detection rate of more than 3.2%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.952-960
• /
• 2004

PSK(Phase Shift Keying) is useful because of the power and spectral efficient modulation. In this paper, no additional hardware will be needed to support various transmit mode in the suggested DSP scheme. We design and implement the synchronization algorithm for M-ary PSK(M=2, 4) demodulator based on DSP scheme, instead of complex analog PSK demodulator. TMS320C6203 is used as DSP. We check the all kinds of waveforms via the graph view window after software programming the emulation on the DSP tool. The result of implementation proves that demodulator using the suggested algorithm has equal performance with demodulator using analog circuits.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.691-700
• /
• 1994

A power line in not so good in characteristics for communication, because it is a media to transfer the commercial electrical power, and its load noise and high frequency noise are so much. Thus, a simple method to transfer a remote control signal on the power line is studied. The already-existing method is that two signals with upper part eliminated is transmitted every N step. But the method is investigated which the transmitter sends a period signal eliminated in arbitrary phase. Thus the transmission power loss due to elimination of signal can be reduced to the minimum. To implement it, a timer calculating the time from zero-crossing point to the phase is required. The micro-controller, 87C51, precisely calculates the phase using one of two built-in timers. As a result, a remote control signal tramsmitter and receiver using a partially eliminated signal, which is better than the conventional technique using half-eliminated signal in a efficiency of power transmission, is realized, and its characteristics are analyzed.

• Explosives and Blasting
• /
• v.33 no.3
• /
• pp.29-50
• /
• 2015

Safe blast criteria based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of blast vibrations. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). In contrast to SRSD scheme, however, the function of maximum charge per delay for CRSD increases without bound after the intersection point of these two functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, it is suggested that CRSD be used within a specified distance slightly beyond the intersection point. On the other hand, there are several attempts that predict vibration level(VL) from the peak particle velocity(PPV) or estimate VL based on the scaled distances without considering their frequency spectra. It appears that these attempts are conducted in blasting contracts only for the purpose of satisfying the environment-related law, which mainly deals with the annoyance aspects of noises and vibrations in human life. But, in principle there could no correlation between peaks of velocity and acceleration over entire frequency spectrum. Therefore, such correlations or estimations should be conducted only between the waves with the same or very similar frequency spectra. Finally, it is a known fact that structural damage due to ground vibration is related to PPV level, the safety level criteria for structures should be defined by allowable PPV levels together with their zero crossing frequencies (ZCF).

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.113-126
• /
• 1997

Electrical resistivity methods of dipole - dipole array profiling and Schiumberger array sounding were tested on a segment of the Woraksan granitic batholith for the research into the imaging of irregular attitudes of fracture zones in the crystaaline rock in terms of processing and interpretation schemes. By the dipole - dipole array method, inhomogeneities such as small scale of fracture zones were properly delineated down at some depth even within hard rock environment. Fracture zones were interpreted to be at the boundaries between the high amplitude zone and very low amplitude zone in the resistivity plot and they were also successfully outlined in two - dimensional layer and pseudo - three - dimensional volume constructed by the incorporation of vertical sounding data. The surface location of the fracture zones was correlated by the zero - crossing point in the VLF(very low frequency) electromagnetic data. Pseudo - three - dimensional attitudes of fracture zones were efficiently illuminated by optimum projection angle. The mean of bulk resistivity for the Woraksan granite and the near fracture zones is estimated to be approximately of 4,000 ohm - m which is much higher than the value of 700 ohm - m for the Rwachunri limesilicate environment. This difference is due to both the rock type, i.e., biotite granite vs limesilicate, and the occurrence of secondary openings of fold and fault associated with the intrusion of granite. In this study statistical analyses on the resistivity color plot were performed in terms of three representative statistical moments, i.e., standard deviation, skewness, and kurtosis. The fracture zones in the standard deviation plot were characterized by the higher value, compared to the value of homogeneous portion. The upper boundary of the high resistivity zone was also successfully delineated in the skewness and kurtosis plots.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.91-103
• /
• 1997

This paper aimed to study what the influences of orthodontic treatment of pronunciation are. We compared the duration and the acoustic wave patterns of Korean consonants pronounced by a control group with those of a patient who had his four premolars extracted and had been given orthodontic treatment The results were as follows : 1. Compared to the control group, the treatment group had a longer duration time of consonant pronunciation for all consonants but "ㅅ(s)" and "ㅌ($(t^h)$" in CV(consonant-vowel) pairs. Especially in the case of "ㅈ(dz)", "ㅆ$({\varphi}^h)$" for CV-pairs, and "ㄷ(d)" in VCV(vowel-consonant-vowel) clusters, the duration of consonant sound showed a sharp contrast between the control group and the treatment group. 2. There were clear differences in the acoustic wave patterns of "ㅉ(ts)", "ㅆ$({\varphi}^h)$" and "ㅊ$(c^h)$", all of which were in VCV-clusters. The acoustic wave pattern of "ㅉ(ts)", when pronounced by the treatment group, was stronger than the control group's. This phenomenon was most remarkable in the transitive section where the "ㅉ(ts)" sound flowed into the following vowel. When a preceding vowel shifted to the consonant "ㅆ$({\varphi}^h)$", the attack property of the appeared clearly in the acoustic waves of the treament group, while in the control group the starting point of consonart was indistinctive. Consonant duration for the treatment group was longer, and the appearance of a zero crossing point in the acoustic wave was more frequent. In the case of "ㅊ$(c^h)$", the treatment group produced a strong acoustic wave, and the property of aspiration was obvious in it. 3. When the treatment group pronounced "ㄷ(d)" and "ㅈ(dz)" in CV-pairs, the acoustic-wave was similar to that of aspirated "ㅌ$(t^h)$" and "ㅊ$(c^h)$". 4. The aspirated "ㅌ$(t^h)$" and "ㅊ$(c^h)$" pronounced by the treatment group showed the stronger airstream and acoustic wave form.