• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.442-448
• /
• 2012

폐 플라스틱을 이용한 연료유 생산 공정을 위한 폴리프로필렌(PP) 수지에 대한 열분해 반응 실험을 하였다. 질소 분위기에서 상온에서 $650^{\circ}C$ 까지의 비등온 조건에서의 열분석기와 $420^{\circ}C$ 등온에서의 Pyrolyser GC-mass 분석기, $420^{\circ}C$의 배치형 반응기에서 무촉매반응과 천연제올라이트, 폐 FCC 촉매, ZSM-5 등의 제올라이트 계 촉매를 사용한 열분해 실험이 행하여졌다. TGA 실험에서 PP 수지의 열분해반응은 $330^{\circ}C$ 부근에서 시작되어, $497^{\circ}C$에서 완결되었다. 촉매반응에서 제올라이트 계열 촉매는 폐 FCC 촉매> 천연제올라이트> ZSM-5> PP의 순으로 열분해 반응속도를 높이는데 유효하였다. 열분해가 완료되는 온도도 폐 FCC 촉매 첨가 시 가장 낮게 나타났다. PY-G.C. mass 실험에서 PP 수지 만의 경우에서보다 촉매가 첨가됨에 따라 탄소 수가 낮은 생성물이 생성되는 것을 알 수 있었다. ZSM-5 촉매나 폐 FCC 촉매 첨가 시 특히 낮은 탄소 수의 생성물이 많이 생성되었다. 회분식 반응기에서 초기 오일생성율은 폐 FCC 촉매 첨가시 가장 높지만, 최종 오일전환율은 천연제올라이트 첨가 시가 폐 FCC 촉매 첨가 시보다 2% 정도 높았다. 탄소분석에서도 폐 FCC 촉매 첨가가 경유 성분이 주성분으로 요구되는 연료유 제조에 우수 하였다.

• 공업화학
• /
• 제30권1호
• /
• pp.54-61
• /
• 2019

본 연구에서는 Cu(II)의 흡착처리 후, 용액 내 함유된 폐흡착제의 효율적인 분리를 위하여 제올라이트(zeolite 4A)의 표면에 금속(Me = Co, Mn, Ni)이 치환된 페라이트 나노 입자를 성장시킨 자성흡착제를 합성하였다. 제올라이트 표면의 금속 페라이트는 용매열 합성법으로 제조되었으며, 자성흡착제의 특성은 XRD (X-ray diffractometer), SEM (scanning electron microscopy) 및 PPMS (physical property measurement system)로 분석하였다. Co-ferrite가 코팅된 제올라이트 복합체(CFZC)의 포화자화율이 5 emu/g으로 가장 높았으며, Cu(II)의 흡착 성능도 우수하였다. CFZC에 의한 Cu(II)의 흡착결과 값들은 298 K에서 Langmuir식에 잘 적용되었다. 그리고 Cu(II)의 흡착공정은 유사 2차 속도식에 부합하였다. 자유에너지 변화값(${\Delta}G^0=-4.63{\sim}-5.21kJ/mol$)은 Cu(II)의 흡착이 298~313 K 범위에서 자발적임을 나타내었다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1009-1013
• /
• 2001

The effects of coupling agent on the interface characteristics between epoxy resin and natural zeolite were studied by SEM, optical microscope and universal testing machine (UTM). Epoxy resin as a matrix was diglycidyl ether of bisphenol A (DGEBA)/4,4'-methylene dianiline (MDA)/malononitrile (MN) system and natural zeolite as an inorganic fillet was produced in Korea. With the increment of zeolite content, tensile strength decreased and it was due to the different elastic moduli of two materials. When external stress was loaded on the composites, the stress concentrated on the weakly bonded interface and crack grew easily. To improve the interface characteristics, the surface of the natural zeolite was treated with the silane coupling agent and it was found that the tensile strength was increased. The morphology of the interface showed that the bonding characteristics were modified by coupling agent.

• 한국환경과학회지
• /
• 제1권2호
• /
• pp.167-175
• /
• 1992

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-Pl zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-Pl exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for Pb2+ ion. The metal ion selectivity of Na-Pl was determined in a decreasing order : $Pb^{2+}$>$Cd^{2+}$>$Cu^{2+}$+>$Zn^{2+}$>$Fe^{3+}$

• 환경위생공학
• /
• 제18권3호통권49호
• /
• pp.43-47
• /
• 2003

The desorption characteristics of NaY zeolite, of which Si/Al ratio is 2.36, was measured at 25${\circ}$C and 150${\circ}$C so as to be used practically as a adsorbent for separation of sulfur oxides from flue gas, for which adsorption and desorption cycles at 25${\circ}$C were repeated four times and that at 150${\circ}$C was done one time. As a result it took 30.8 at 150${\circ}$C and 164.1 minutes in average at 25${\circ}$C to reach equilibrium condition. It means that regeneration of the NaY zeolite can be done below 150${\circ}$C so that zeolite can be used for flue gas desulfurization.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.167-175
• /
• 1997

This study was conducted for an efficient utilization of waste fly ash obtained from the power plant. Fly ash was used for synthesizing zeolite. Na-P1 zeolite could be easily synthesized from waste fly ash and showed the potential to remove heavy metal ions. The synthetic zeolite showed good adsorption property for heavy metal much better than raw fly ash and natural zeolites. Na-P1 exhibited the high adsorption efficiency with a maximum value of 260 Pb mg/g and strong affinity for $Pb^{2+}$ ion. The metal ion selectivity of Na-P1 was determined in a decreasing order : $Pb^{2+}>Cd^{2+}>Cu^{2+}>Zn^{2+}>Fe^{3+}$.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.248-254
• /
• 2012

During the monolayer assembly of zeolite microcrystals using sonication with stacking (SS) method, the factors that govern the degree of close packing (DCP) between the microcrystals, the rate of attachment (rA) of microcrystals onto the substrate, the degree of coverage (DOC), and the binding strength (BS) between each crystal and the substrate were investigated for each mode of binding linkage (MBL). The tested MBLs were covalent linkage (CL), ionic linkage (IL), and polyelectrolyte-mediated ionic linkage (p-IL). Unlike the monolayers of zeolite crystals assembled on glass with a covalent linkage, the strong BS, very high DOC, and very high DCP do not decrease during monolayer assembly on glass through ionic linkages. This results indicate that the surface migration of crystals undergo linkage-nondestructively when crystals were attached to the substrates through ionic linkages.

• 한국수소및신에너지학회논문집
• /
• 제14권2호
• /
• pp.146-154
• /
• 2003

The hybrids of zeolite and metal hydride were prepared to improve the absorption properties as media for hydrogen storage. The zeolites which was deposited on the surface by metal hydride vapor showed excellent absorption properties and sodalite was proved to be better than zeolite-A in the reaction velocity and hydrogen storage capacity. This suggests the metal hydride could be used effectively as catalytic active material for enhancing the hydrogen storage in zeolite containing $\alpha$-cages and furthermore the hydrogen molecules have preference tobe occluded in their cavities containing $\alpha$-cages more effectively than that containing a and $\beta$-cages.

• 한국농공학회논문집
• /
• 제57권4호
• /
• pp.31-38
• /
• 2015

This study aims to assess the effectiveness of limestone, zeolite, and crushed concrete as capping material to block the release of heavy metals (As, Cu, Cr, Ni, and Pb) and reduce the sediment oxygen demand. The efficiency of limestone, zeolite, and crushed concrete was evaluated in a reactor in which a 1-cm thick layer of capping materials was placed on the sediments collected from Inchon north harbor. Dissolved oxygen concentration and heavy metal concentration in seawater above the uncapped sediments and capping material were monitored for 17 days. The sediment oxygen demand was in the following increasing order: crushed concrete ($288.37mg/m^2{\cdot}d$) < zeolite ($428.96mg/m^2{\cdot}d$) < limestone ($904.53mg/m^2{\cdot}d$) < uncapped ($981.34mg/m^2{\cdot}d$). The capping materials could reduce the sediment oxygen demand by blocking the release of biochemical matters consuming dissolved oxygen in seawater. It was also shown that zeolite and crushed concrete could effectively block the release of Cu, Ni, and Pb but those were not effective for the interruption of As and Cr release from marine contaminated sediments.

• Journal of Radiation Protection and Research
• /
• 제10권1호
• /
• pp.3-13
• /
• 1985

주요 핵분열 생성물인 세슘-137, 장수명 핵종과 세륨-144, 희토류원소 그리고 부식 생성물인 코발트-60등의 제올라이트 A, 제올라이트 F-9(Faujasite) 그리고 비정형 제올라이트에 대한 흡착거동을 염농도 0.01 M부터 2.0 M 질산과 질산암모늄 그리고 교반시간 15분부터 90분까지 15분 간격으로 검토하였다. Kd 값은 Batch 실험방법으로 구했다. 결론으로 주요핵종의 분리 제거의 최적조건은 비정질 제올라이트, 0.01 M-질산과 0.1 M-질산암모늄, pH 4, 교반시간 한시간 그리고 가장 효율높은 핵종은 세슘 -137이다.