• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.168-168
• /
• 2004

본 논문은 헤테로다인 간섭계를 이용한 레이저 진동 측정기에 대해 기술하고 있다. 상용 레이저 진동 측정기가 대부분 AOM을 이용하여 주파수 천이를 일으키는 반면, 본 연구에서는 Zeeman 안정화 He-Ne 레이저를 사용하므로써, 서로 다른 주파수를 가지는 레이저를 동시에 얻을 수 있었다. 따라서, Zeeman 안정화 He-Ne 레이저를 사용하는 진동측정기의 경우 간섭계 구성을 위해 사용되는 비용을 현저히 줄일 수 있다. 또한, AOM의 고주파 신호를 처리하기 위해서는 RE 대역의 신호처리 회로 설계가 필요하지만, Zeeman 안정화 레이저의 주파수 천이가 낮으므로, 제안된 진동측정기의 신호처리가 용이하다.(중략)

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.493-495
• /
• 1993

The frequency of the 633 nm internal mirror He-Ne laser has been stabilized by using the beat frequency and the intensity difference between two Zeeman split components in a transverse magnetic field. The frequency stability and the frequency temperature coefficient for the beat frequency method was $7.0{\times}10^{-11}$ and $170 kHz/^{\circ}C$, respectively, and those for the intensity difference was $1.1{\times}10^{-9}$ and $1.8 MHz/^{\circ}C$, respectively.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.92-93
• /
• 2001

주파수 안정화 레이저 광원은 10-6 이상의 상대 불확도가 필요한 간섭계에서 널리 쓰이고 있으며 특히 변위 측정 시스템에서는 반드시 쓰이고 있다. 상용화된 많은 변위 측정 시스템은 신호 대 잡음비가 우수하고 광학계의 정렬이 더 쉬운 헤테로다인 방식을 채택하고 있으며 이를 위해서 서로 수직 선형 편광인 다른 주파수의 광을 내보내는 광원이 필요하다. 현재 헤테로다인 변위 측정 시스템에 쓰이고 있는 광원은 이중 주파수 광원을 만드는 방식에 따라 지만 효과(Zeeman effect)를 이용한 지만 레이저(HP사)와 음향-광 변조기(Acousto-optic modulator)를 이용한 이중 주파수 레이저(Zy해사)가 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.922-925
• /
• 2005

This article describes a FM modulation algorithm to increase the measurement speed by increasing the beat frequency of the laser without acousto-optic modulator(AOM) in the heterodyne laser interferometer. The proposed algorithm can increase the beat frequency of the heterodyne laser which limit the measurement speed by adjusting a carrier frequency through electronic circuit, while AOM is used to shift the frequency of the heterodyne laser in conventional method. Electronic circuit is constructed to modulate the signals from a laser interferometer and a waveform generator. The brier analysis, the measurement scheme of the system, and the experimental results using a Zeeman-stabilized He-Ne laser are presented. They demonstrate that the proposed algorithm is proven to enhance the measurement speed limit by increasing the beat frequency of the heterodyne laser.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.128-135
• /
• 1996

This paper proposes a high precision measurement technique to obtain the height of gage block with a few millimeter height. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, in the second step, heterodyne laser interferometry is adopted to acquire the precision value. A new kind of phase detector is constructed in the low cost for the heterodyne interferometer and its linearity with ${\pm}1%$ is confirmed by experiment. Also measurement error factors due to enviroments are discussed and methodology to reduce such errors is proposed. Preliminary experiments are carried out for the gage blocks of as high as a few millimeter.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.37-43
• /
• 1996

Two type interference air refractometers have been developed by using a frequency stabilized He-Ne laser in a transverse magnetic field. The refractometers were based on symmetric multiple pass interferometer. In this system, One part of the beams passed through air whose refractivity is to be measured and the other part of the beams passed through a vacuum champer to be used as a reference. Several measurements were performed under normal air condition. Maximum difference between two interference refractometers was ${\pm}2{\times}10^{-8}$.