• 제목/요약/키워드: Zation

검색결과 27건 처리시간 0.024초

Synthesis of SnO2 nanowires on one-dimensional carbonization cotton fabric

  • Khai, Tran Van;Shim, Kwang-Bo
    • 한국결정성장학회지
    • /
    • 제22권1호
    • /
    • pp.25-28
    • /
    • 2012
  • Tin-oxide ($SnO_2$) nanowires have been synthesized on one-dimensional (1D) carbonization cotton fabric using chemical vapour deposition method. One-dimensional (1D) carbonization cotton fabric has been synthesized from cotton fabric using annealing process in nitrogen gas at $1000^{\circ}C$. The $SnO_2$ nanowires are single-crystalline rutile structures with 20 nm in diameter and 10 ${\mu}m$ in length. Scanning electron microscopy (SEM), x-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy and photoluminescence (PL) spectroscopy were utilized to characterize the as-synthesized products.

$BaO-B_2O_3$계 유리의 상분리 현상과 유리의 구조 (Phase Separation and their Structures in $BaO-B_2O_3$ Glasses)

  • 채수철;김철영
    • 한국세라믹학회지
    • /
    • 제23권6호
    • /
    • pp.25-32
    • /
    • 1986
  • Phase spearated glass is heterogeneous in microscopic point of view and the heterogeneities affect the structures of glasses. In the present work the phase separation of $BaO-B_2O_3$ glass system was investigated and the effect of $P_2O_5$ on the phase separation and crystallization was also studied in the above system. Experiments such as scanning electron microscopy X-ray diffraction and infrared spectroscopy were performed. Phase separation with $B_2O_3$ rich phase matrix and BaO rich phase droplet was observed for the glasses containing less than 6 mole% of BaO while the opposite morphology of phase separation was found for the glasses containing more than 7 mole% of BaO. Phase separation region was extended up to the glass with 22mole% of BaO when the amount of $P_2O_5$ was increased. The heat-treated glasses crystallized to BaO.$4B_2O_3$$P_2O_5$ hindered the glass from the crystalli-zation.

  • PDF

LQG와 LQG/LTR방법을 이용한 헬리콥터의 비행위치 제어 (Control of a Helicopter in Hover Using the LQG and LQG/LTR Methods)

  • 김종식;마삼선;송명훈
    • 한국정밀공학회지
    • /
    • 제7권1호
    • /
    • pp.74-85
    • /
    • 1990
  • The LQG and LQG/LTR compensators have the same structrues in dynamics. The only difference is the values of the design parameters in the two compensators. The design parameters of the LQG and LQG/LTR compensators are selected in the sense of the least-squares error minimi- zation and loop shaping, respectively. In this paper, the LQG and LQG/ LTR design methods are applied to the helicopter in hover which is modeled as a SISO fourth order system. The dynamic characteristics and the perfor- mance of the two control systems are analyzed by the computer simulation. It is found that the LQG/LTR design method is systematic and has good performance in comparision with the LQG design method.

  • PDF

최소 응력을 갖는 필렛의 형상설계 (Optimal Shape of Fillet for Minimum Stress)

  • 김호룡;이장용
    • 한국정밀공학회지
    • /
    • 제7권4호
    • /
    • pp.149-161
    • /
    • 1990
  • In this study, an optimal shape design was performed on a fillet model which is subject to surface traction through minimizing the maximum stress of the fillet. A 2-dimensional quadratic isoparametirc element with 8 nodes was used in stress analysis for finite element method, and Hooke-Jeeves direct search algorithm was adopted for optimi- zation. From the resulting optimal shape, it was found that the maxium von Mises stress on the boundary of fillet was reduced by 36%, compared to other paper in which the cross sectional area of fillet was minimized. In conclusion, a real optimal fillet shape could be obtained in the viewpoint of yielding, and more pratical fillet design could be accomplished.

  • PDF

포항가속기 연구소의 진공게이지 교정시스템 (Vacuum Gauge Calibration System in Pohang Acccelerator Laboratory)

  • 김형종;조복래;이해철;박종도;최우천
    • 한국진공학회지
    • /
    • 제3권4호
    • /
    • pp.382-388
    • /
    • 1994
  • 포항가속기연구소에서 사용될 진공게이지 교정시스템이 설계 제작되었다. 이 교정시스템은 동적 교정방법으로 설계되었으며 transfer standard 로서 spinning rotor gauge를 사용하였다. 포항가속기의 저장리에 사용될 모든 진공게이지는 교정시스템으로 교정을 하여 사용할 것이며, 주로 교정할 게이지로 는 Bayard-Alpert(BA) nude ionization gauge와 cold cathode gauge등이 있다. 본 논문에서는 포항가속 기의 진공게이지 교정시스템에 대해서 소개를 하였고 현재까지 BA nude ioni-zation gauge 6대 extractor gauge 1대 high pressure gauge 1대와 cold cathode gauge 5대를 10-4에서 10-4 Torr 범위내 에서 교정하여 그 결과를 보였다.

  • PDF

반자동 지도입력 시스템기술 개발 연구 (The Study on a Semi-automated Mapping System)

  • 윤재경;이기혁;우창헌;이경자;김수용
    • Spatial Information Research
    • /
    • 제3권1호
    • /
    • pp.19-27
    • /
    • 1995
  • 논문에서 다룰 시스템은 영상 처리를 이용한 전처리과정에서 사용자에게 필요한 정보를 얻은 뒤 이 자료를 상호교류적으로 입력하는 반자동 지도입력시스템이다. 영상 처리는 주로 중요한 정보의 하나인 외곽선 추출에 주력하였고 이를 위해 적응성 평활화 필터와 연결보존외곽선추출를 사용하였다. 외곽선 정보는 편집기에서 벡터화 하며 편집의 효율을 높이기 위해 내부 자료구조는 확장된 사진트리 구조를 사용하였다. 이러한 작업들은 그 특성에 따라 개인용 컴퓨터와 워크스테이션에 각각 분담시켰고 네트웍을 통해 저장기기를 공유하여 작업의 일관성및 단순화를 추구하였다.

  • PDF

Preparation of 2,9-Dimethyl-6H,13H-dibenzo[d,i][1,6]dithiecin-7,14dlone by Sodium Azide-Promoted Cyclodimeri-zation of o-Acylthiophenacyl Chloride

  • 유성우;김민경;이기정
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권8호
    • /
    • pp.797-800
    • /
    • 2000
  • The reaction of o-acylthiophenacyl chloride 5a with onc equivalent ofsodium azide in aqueous acetone at-10~ $-5^{\circ}C$ gave 2,9-dimethyl-6H,I3H-dibenzo[d,i][1,6]dithiecin-7,14-dione 7(10%),acyclic dimer 8(64%),and tri-mer 9 (8%). Dimer 8 and trimer 9 we re converted readily to 7 under the similar conditions at room temperature in yields of 72% and 53%,respectivel. Also, one pot synthesis of 7 (64%, 45%) from the reaction of 5a or 5b with two equivalents of sodium azide at room temperature was very successful.

Theoretical Studies on the Gas-Phase Alkylation of Delocalized Ambident Anions with Methyl Fluoride

  • 이익춘;박형연;한인숙;김창곤;김찬경;이본수
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권5호
    • /
    • pp.559-566
    • /
    • 1999
  • Gas-phase alkylations of delocalized ambident anions, Y---CH---X- where X, Y=CH2, O, or S, have been investigated theoretically at the MP2/6-31+G*//MP2/6-31+G* and QCISD/6-31+G*//MP2/6-31+G* lev-els. O-and S-alkylations (X=O and S) are more favored kinetically by ΔE^≠ = 4.6 and 9.8 kcal mol-1 than the respective C-alkylations even though they are thermodynamically less favored by 22.4 and 6.0 kcal mol-1 respectively. It was found that the transition structures for the C-alkylations are imbalanced due to the endoergic rehybridi-zation of the carbon center from sp2 to sp3 which leads to premature bond contraction of the C-Y bond and delayed bond stretching of the C-X bond. In the O-, or S-alkylation, such endoergic process is not required since the σ-lone pair on O or S is involved in the initial stage of alkylation. The imbalanced TSs for the C-alkylation are accompanied by higher intrinsic barriers and deformation energies.

정보화 차원의 사회 ${\cdot}$ 문화 발전 수준에 대한 공간 분석 (A Spatial Analysis on the Socio-Cultural Level of Informatization Aspects)

  • 유영준
    • 대한지리학회지
    • /
    • 제31권3호
    • /
    • pp.529-541
    • /
    • 1996
  • 본 연구는 첫째 정보화의 진전 초기에는 정보화 현상의 공간적 집중화가 이루어지며, 둘째 경제가 발전함에 따라 복지적 차원의 지역간 격차보다 앞으로 지역의 경제 활성화에 상당히 영향을 줄 것으로 예상되는 정보화 차원의 지역간 격차가 클 것이라는 가설을 세워 연구를 진행하였는데 그 결과는 다음과 같다. 첫째, 정보화 차원의 사회.문화 발전 수준은 서울과 다른 지역간에 격차가 상당히 크게 나타나고 있으며, 서울 및 수도권으로의 집중화가 이루어지고 있음을 알 수 있다. 둘째, 정보화가 진전되면서 나타나는 지역에의 영향을 살펴보기 위해서 지역경제의 자족성을 나타내는 지표인 복지수준과 정보화 수준의 지역간 격차를 비교한 결과 정보화 수준이 복지수준의 격차에 비해 크게 나타나고 있다. 그 동안의 경제발전에 의해 나타난 지역격차를 줄이기 위해서 도입된 정보화는 하부구조가 잘 갖추어진 대도시 중심으로 이루어져 왔기 때문에 지역간 격차를 더욱 증가시키는 결과를 초래했다. 따라서, 이런 지역격차를 줄이기 위해서는 중앙정부뿐만 아니라 자치정부를 중심으로 한 체계적인 지역정보화 정책이 필요하다.

  • PDF