• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.170-170
• /
• 2010

Thin-film transistors (TFT) have become the key components of electronic and optoelectronic devices. Most conventional thin-film field-effect transistors in display applications use an amorphous or polycrystal Si:H layer as the channel. This silicon layers are opaque in the visible range and severely restrict the amount of light detected by the observer due to its bandgap energy smaller than the visible light. Therefore, Si:H TFT devices reduce the efficiency of light transmittance and brightness. One method to increase the efficiency is to use the transparent oxides for the channel, electrode, and gate insulator. The development of transparent oxides for the components of thin-film field-effect transistors and the room-temperature fabrication with low voltage operations of the devices can offer the flexibility in designing the devices and contribute to the progress of next generation display technologies based on transparent displays and flexible displays. In this thesis, I report on the dc performance of transparent thin-film transistors using amorphous indium tin zinc oxides for an active layer. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium tin zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium tin zinc oxides was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 4.17V and an on/off ration of ${\sim}10^9$ operated as an n-type enhancement mode with saturation mobility with $15.8\;cm^2/Vs$. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium tin zinc oxides for an active layer were reported. The devices were fabricated at room temperature by RF magnetron sputtering. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1267-1274
• /
• 2018

Objective: The objective of the study was to investigate the effects of zinc amino acid complex (ZnAA) on growth performance, hematological and biochemical parameters in weanling pigs. Methods: In Exp. 1, a total of 216 Duroc${\times}$Landrace${\times}$Large White weanling pigs were assigned randomly to 6 dietary treatments. Each treatment had 6 replicates (pens) with 6 pigs each. The diets were corn-soybean meal based with supplementation of 0, 20, 40, 80, 120 mg Zn/kg from ZnAA or 40 mg Zn/kg from feed-grade zinc sulfate. The experiment lasted 42 days. In Exp. 2, a total of 180 weanling pigs were assigned randomly to 3 dietary treatments supplemented with 0, 80, or 800 mg Zn/kg from ZnAA. Results: In Exp. 1, pigs fed 40 to 80 mg Zn/kg from ZnAA had higher (p<0.05) average daily gain (ADG) than the unsupplemented group during d 0 to 14. During d 0 to 42, the pigs fed 20 to 120 mg Zn/kg from ZnAA had increased (p<0.05) ADG. Pigs fed 20 to 120 mg/kg Zn from ZnAA had lower feed:gain (p<0.05), increased the activity of serum Cu-Zn superoxide dismutase on d 14, and increased serum Zn levels on d 42 (p<0.05). In Exp. 2, pigs fed diets with 800 mg Zn/kg had increased average daily feed intake during d 15 to 28 (p<0.05) compared to the unsupplemented group. During d 0 to 28, the pigs fed supplemental Zn had increased ADG (p<0.05). On d 14 and d 28, pigs fed supplemental Zn had higher the serum alkaline phosphatase activities (p<0.05). No significant differences were observed in the hematological parameters and organ indices. Conclusion: Supplementation with 20 to 80 mg/kg Zn from ZnAA improved the growth performance in weaned pigs. The piglets can tolerate up to 800 mg/kg Zn from ZnAA with limited potential health effects.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.48-55
• /
• 2006

This study was carried out for establishing the physical recycling technique for commercializing process on household batteries. The procedure involves shape separator, crushing, magnetic separation, classification and eddy current separation in sequence. The separation capacity was 400-600 unit cell/hr with shape separation system. The impurities such as manganese and zinc in the magnetic product were below 0.1% respectively, the concentration of iron was above 99% in spent carbon zinc battery. Also non-magnetic products are composed of 22-30% En, 16-22% Mn, 1-3% Fe in the case oi spent zinc carbon battery. The amounts of other components such as carbon rod, plastics and separator were about 37-50%. From the eddy current separation of nonferrous products, the plate-type zinc components were separated up to 96% with 2,250-2,750 meter/min of the conveyor speed.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2019

This study was performed to select the effective plant for phytoremediation of heavy metal contaminated areas. After cultivation of fifteen Compositae plants on soil contaminated with heavy metals for 8 weeks, the growth response and accumulation ability of each parts for heavy metal, such as arsenic, cadmium, copper, lead, and zinc were analyzed. Except Adiantum capillus-veneris, growth of Aster incisus, Coreopsis drumondii), Dendranthema indicum, Saussurea pulchella were relatively fine. Arsenic accumulation ability was the highest by Artemisia gmelini ($25.52mg{\cdot}kg^{-1}$ DW) in underground part, and D. sichotense ($3.35mg{\cdot}kg^{-1}$) in aerial part. Cadmium was the highest by Aster magnus ($2.50mg{\cdot}kg^{-1}$) in aerial part. Aerial and underground part of S. pulchella showed the highest copper accumulation (24.29, $99.92mg{\cdot}kg^{-1}$). In lead, 1.43 (A. magnus)${\sim}5.00mg{\cdot}kg^{-1}$ (S. deltoides) were accumulated in aerial part among fifteen Compositae plants. Aster hayatae ($140.09mg{\cdot}kg^{-1}$), Aster yomena ($109.07mg{\cdot}kg^{-1}$), A. magnus ($100.21mg{\cdot}kg^{-1}$) are absorbed more than $100mg{\cdot}kg^{-1}$ of Zinc. Therefore, they are considered to be phytoremediation material of zinc contaminated areas.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.5
• /
• pp.659-666
• /
• 2005

The purpose of this study was to compare the intake status of calcium, phosphorus, iron, and zinc of Korean adults residing in different regions. Subjects were recruited and divided into three groups according to the districts where they lived, which included rural (n=137), coastal (n=100), and urban district (n=117). Subjects were interviewed using a general questionnaire and 24-hour recall method for dietary intake. The average age of the subjects were 58.1 years for rural district, 57.7 years for coastal district, and 48.6 years for urban district. There was no significance in total food intake by regions. The food intakes from cereals, mushrooms, vegetables of rural district, that from fishes of coastal district, and those from sugars, milks, oils of urban area were the highest among three districts. The calcium, phosphorus, iron, and zinc intakes were $60.1\%,\;123.9\%,\;95.2\%,\;and\;73.1\%$ of RDAs, respectively. The calcium intakes as percentage of RDA in rural and coastal district were significantly (p<0.01) lower than that in urban district. A larger number of subjects from coastal or urban district ate under $75\%$ of zinc RDA compared to those from rural village. Major sources of dietary calcium in total subjects were anchovy, kimchi, milk, soybean curd, rice, ice cream, sea mustard, yogurt, loach, and welsh onion. Rice supplied $15.5\%$ for phosphorus, $22.1\%$ for iron, and $35.9\%$ for zinc of total intake. Except for rice, major sources of dietary zinc were pork, beef, small red bean, dog meat, chicken, jacopever, soybean curd, glutinous millet, and kimchi. In conclusion, the food and mineral intakes of adults differed according to the regions in which they resided. The food and nutrient intakes of coastal district were not satisfactory, and calcium and zinc intakes of three regions did not meet RDAs. Therefore, it is required unique and discriminatory nutritional education with each region for increasing intakes of calcium and zinc.

• Journal of Integrative Natural Science
• /
• v.7 no.2
• /
• pp.130-137
• /
• 2014

Resins were synthesized by mixing N-phenylaza-15-crown-5 macrocyclic ligand attached to styrene (2th petroleum in 4th class hazardous materials) divinylbenzene (DVB) copolymer with crosslink of 1%, 2%, 6%, and 12% by substitution reaction. The synthesis of these resins was confirmed by content of chlorine, element analysis, thermo gravimetric analysis (TGA), surface area, and IR-spectroscopy. The effects of pH, equilibrium arrival time, dielectric constant of solvent and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ions were showed fast adsorption on the resins above pH 4. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium (VI) > zinc (II) > europium (III) ions. The uranium ion adsorbed in the order of 1%, 2%, 6%, and 12% crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.

• ALGAE
• /
• v.26 no.3
• /
• pp.265-275
• /
• 2011

This study examined the bioaccumulation of the heavy metals copper (Cu) and zinc (Zn) by the giant kelp, Macrocystis pyrifera, by exposing meristematic kelp tissue to elevated metal concentrations in seawater within laboratory aquaria. Specifically, we carried out two different experiments. The first examined metal uptake under a single, ecologically-relevant elevation of each metal (30 ppb Cu and 100 ppb Zn), and the second examined the relationships between varying levels of the metals (i.e., 15, 39, 60, 120, 240, and 480 ppb Cu, and 50, 100, 200, 300, 500, and 600 ppb Zn). Both experiments were designed to contrast the uptake of the metals in isolation (i.e., when only one metal concentration was elevated) and in combination (i.e., when both metals' concentrations were elevated). Following three days of exposure to the elevated metal concentrations, we collected and analyzed the M. pyrifera tissues using inductively coupled plasma atomic emissions spectroscopy. Our results indicated that M. pyrifera bioaccumulated Cu in all treatments where Cu concentrations in the seawater were elevated, regardless of whether Zn concentrations were also elevated. Similarly, M. pyrifera bioaccumulated Zn in treatments where seawater Zn concentrations were elevated, but this occurred only when we increased Zn alone, and not when we simultaneously increased Cu concentrations. This suggests that elevated Cu concentrations inhibit Zn uptake, but not vice versa. Following this, our second experiment examined the relationships among varying seawater Cu and Zn concentrations and their bioaccumulation by M. pyrifera. Here, our results indicated that, as their concentrations in the seawater rise, Cu and Zn uptake by M. pyrifera tissue also rises. As with the first experiment, the presence of elevated Zn in the water did not appear to affect Cu uptake at any concentration examined. However, although it was not statistically significant, we observed that the presence of elevated Cu in seawater appeared to trend toward inhibiting Zn uptake, especially at higher levels of the metals. This study suggests that M. pyrifera may be useful as a bio-indicator species for monitoring heavy metal pollution in coastal environments.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.51-55
• /
• 2011

We investigated the etching characteristics of zinc oxide (ZnO) thin films deposited by the atomic layer deposition method. The gases of the inductively coupled plasma chemistry consisted of $Cl_2$, Ar, and $O_2$. The maximum etch rate was 40.3 nm/min at a gas flow ratio of $Cl_2$/Ar=15:5 sccm, radio-frequency power of 600 W, bias power of 200 W, and process pressure of 2 Pa. We also investigated the plasma induced damage in the etched ZnO thin films using X-ray diffraction (XRD), atomic force microscopy and photoluminescence (PL). A highly oriented (100) peak was present in the XRD spectroscopy of the ZnO samples. The full width at half maximum value of the ZnO sample etched using the $O_2/Cl_2$/Ar chemistry was higher than that of the as-deposited sample. The roughness of the ZnO thin films increased from 1.91 nm to 2.45 nm after etching in the $O_2/Cl_2$/Ar plasma chemistry. Also, we obtained a strong band edge emission at 380 nm. The intensities of the peaks in the PL spectra from the samples etched in all of the chemistries were increased. However, there was no deep level emission.

• Journal of Nutrition and Health
• /
• v.27 no.5
• /
• pp.483-494
• /
• 1994

The purpose of this study was to investigate the effect of nutritional status on the cell-mediated and humoral immunity in female college students. The nutritional status of twenty subjects was determined by six-days food records, anthropometric measurements, and biochemical assessments of serum nutrients. Cell-mediated and humoral immunity of the subjects was analyzed by in vivo and in vitro assessments. The results were summerized as follows : First, The average daily energy intake was 1437Kcal(CHO : PRO : FAT = 61:13:26), which corresponds to 71.9% of RDA. Anthropometric measurements showed that 50% of the subjects was under-weight(BMI<20), only 5% was over-weight(25

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.114-120
• /
• 2012

In this research, we prepared Ga doped zinc oxide(ZnO:Ga, GZO) targets each difference sintering temperature $700^{\circ}C$, $800^{\circ}C$, and doping rate 1 wt.%, 2 wt.%, 3 wt.%. The characteristics of thin film on glass substrates which deposited by facing target sputtering in pure Ar atmosphere are reported. Ga doped zinc oxide film is attracted material through low resistivity, high transmittance, etc. When prepared target powder's structure was investigated by scanning electron microscope, densification and coarsening by driving force was observed. For each ZnO:Ga films with a $Ga_2O_3$ content of 3 wt.% at input power of 45W, the lowest resistivity of $9.967{\times}10^{-4}{\Omega}{\cdot}cm$ ($700^{\circ}C$) and $9.846{\times}10^{-4}{\Omega}{\cdot}cm$ ($800^{\circ}C$) was obtained. the carrier concentration and mobility were $4.09{\times}10^{20}cm^{-3}$($700^{\circ}C$), $4.12{\times}10^{20}cm^{-3}$($800^{\circ}C$) and $15.31cm^2/V{\cdot}s(700^{\circ}C)$, $12.51cm^2/V{\cdot}s(800^{\circ}C)$, respectively. And except 1 wt.% Ga doped ZnO thin film, average transmittance of these samples in the range 350-800 nm was over 80%.