• Corrosion Science and Technology
• /
• v.15 no.6
• /
• pp.311-313
• /
• 2016

The anodic dissolution behavior of copper and brass in an electrolyte solution of 0.5M NaCl containing 0.5 mM $NaHCO_3$ was investigated by electrochemical impedance spectroscopy. The Nyquist plots of the copper impedance described a small loop in the high-frequency range and a large locus in the low-frequency range. Additionally, the features of the impedance spectrum of the brass were similar to those of the copper. This indicates that the copper-enriched layer formed on the brass surface due to the selective dissolution of the zinc from the surface. In addition, the rest potential and the anodic polarization curve for each sample were measured in order to discuss the selective dissolution of the zinc from the brass surface.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.325-330
• /
• 2010

Many surface protection methods have been developed to apply for constructional steels used under severe corrosive environment. Thermal spray coating has been known to be an attractive technique due to its relatively high coating speed. Furthermore high corrosion resistance of coated film with thermal spray is required to expand its application. Four types of coated films(DFT:300 um) such as pure zinc, pure aluminum and two Al-Zn alloy (Al:Zn=85:15 and Al:Zn=95:5) onto the carbon steel (SS401) were prepared with arc spray, and the corrosion behavior of their samples were evaluated by electrochemical method in this study. Pure aluminum sample showed high corrosion resistance behavior exposed to sea water solution and pure zinc and alloy (Al:Zn=95:5) samples followed pure aluminum sample. The other alloy(Al:Zn=85:15) so called galvalume coated onto the carbon steel ranks the 4th corrosion resistance in this study. The results of porosity ratio of those samples by observation are well matched with the electrochemical data.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.26-31
• /
• 2008

Anthracnose caused by Colletotrichum spp. has been known as a significant disease which commonly infects to the fruits of Chinese matrimony (Lycium chinese) in the field conditions. To select effective fungicides for the control of Chinese matrimony anthracnose, the antifungal activity of 15 fungicides were evaluated with 13 different strains of Colletotrichum spp. in the laboratory condition. Six fungicides (Dithianon WG, Tebuconazole SC, Tebuconazole WG, Trifloxystrobin + Tebuconazole SC, Azoxystrobin SC and Polyoxin D zinc salt + Carbendazim WP) out of them, showed effective suppression with the mycelium growth of pathogenic fungus, and were selected to test in vivo of the field condition. Five fungicides, Dithianon WG, Tebuconazole WG, Trifloxystrobin + Tebuconazole SC, Tebuconazole SC and Azoxystrobin SC, were significantly effective to protect anthracnose of Chinese matrimony, the variety "Chungyang Jerae".

• Korean Journal of Materials Research
• /
• v.15 no.11
• /
• pp.722-729
• /
• 2005

The electrical and dielectric stability of zinc oxide-based varistors were investigated with the cobalt oxide contents in the range of $0.5\~5.0 mo\l%$. As cobalt oxide contents increased, the ceramic density increased in the range of $5.25\~5.55g/cm^3$ and the varistor voltage decreased in the range of $235.3\~86.0V$. The varistor with on addition of cobalt oxide $1.0 mol\%$ exhibited good nonlinearity. in which the nonlinear exponent is 66.6 and the leakage current is $1.2{\mu}A$. Furthermore, the varistors exhibited the highest electrical and dielectric stability, with $\%{\Delta}V_{1mA}=-1.9\%,\;\%{\Delta}{\alpha}=-10.5\%,\;\%{\Delta}I_L=+275.0\%,\;and\;\%{\Delta}tna{\delta}=+55.6\%$, under DC accelerated aging $0.95V_{1mA}/150^{\circ}C/24h$.

• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.1-15
• /
• 1995

Tolerance to toxic effects of cadmium(Cd), including lethality has been shown following pretreatment with cadmium and zinc. This study was designed to determine if tolerance also develops to Cd-induced hepatotoxicity and renal toxicity. Three groups of rats(A, B, C), each consisting of 52 rats, were studied and each group was divided into three subgroups(1,2,3), 28 rats for each subgroup. Rats were subcutaneously pretreated with saline(A), $CdCl_2$(0.5 mg/kg, B), and $ZnCl_2$(13.0 mg/kg, C) during time periods of 5 days. At the end of the period, rats were challenged with $CdCl_2$(3.0 and 6.0 mg/kg) by intraperitoneal injection. As for the cadmium levels in rat tissues after 1,3,5,6 days of pretreatments, it was highest in the liver. Then kidney, heart, blood and muscle followed it in that order. After 24, 48 and 96 hours of intraperitoneal injection by challenge doses the concentration of cadmium in liver and kidney increased proportionally to the increase of challenge dosage. However metallothioneins in liver and kidney were increased by the pretreatment of cadmium and zinc. These data indicate the liver is a major target-organ of acute Cd poisoning, and suggest that cadmium induced hepatic injury, via release of Cd-MT, may play an important role in the nephrotoxicity observed in response to short-term exposure to cadmium. This result suggest that increasing cadmium concentrations, gradually accumulating in liver and kidney as the result of the pretreatment, served to induce the synthesis of metallothionein, thus making them resistant to the challenge from cadmium.

• Journal of Nutrition and Health
• /
• v.31 no.8
• /
• pp.1270-1282
• /
• 1998

The purpose of this research is to compare the effdct of the new weekly iron supplementation on maternal iron and zinc nutritional status with the effect of the present daily iron supplementation. To assess the iron ad zinc status of rpegant women visiting public health center in Ulsan, interview for dietary survey and general aspect of each subject was given and biochemical analysis of blood and urine was performed. The study subjects were divided to two groups randomly, but the subjects whose Hgb level was very low were allocated in daily group ethically because theeffect of weekly supplementation was not yet established as safety. Daily group received 80mg elemental Fe(250mg Fe as ferrous sulfate) per day for 100days, while weekly group received 160mg elemental Fe once a week for 15 weeks. After treatement, Hgb(p<0.01), Hct(p<0.01) , serum iron(p<0.05) and serum ferritin(p<0.001) in weekly group but RBC, Hgb , Hct , serum iron and serum iron and serum ferritin increased slightly. After correction for the initial Hgb by including it in the MANIVA, the difference in treatment effects of Hgb and TIBC between groups was statistically significant. The effect of weekly vs, daily iron supplementation program on zinc status was also studied. The difference in treatment effect between two groups was, however, not sifnificant. It is concluded that once weekly rion supplementation program in pregnant women was less effectgive to improve the iron status than daily iron supplementation program. However, because the weekly dose prevented a decline in Hgb as well as in ferritin, itw effect was positive , given the fact that non-supplemented women almost always exhibit a sifnificant drop in Hgb values. It seems that it will improve the iron status well if the amount or frequency of supplements is to be adjusted . Biweekly supplementation of a different dose or antother type of iron supplement, such as through a gastric delivery system, might be better.

• Restorative Dentistry and Endodontics
• /
• v.16 no.2
• /
• pp.33-42
• /
• 1991

The purpose of this study was to evaluate the sealing properties of the temporary filling materials used in endodontic treatment Access cavities were prepared in 135 extracted human molar teeth. Then, cotton pellets were placed in the pulp chamber until the depth of 5 mm for the temporary filling materials; Caviton, zine oxide-eugenol, double sealing (A) (stopping 15 mm + zinc oxide - eugenol, 3.5mm ) double sealing (B) (stopping 3.0 mm + zinc oxide - eugenol 2.0 mm) and gutta percha stopping. After filling the materials, the teeth were immersed in 1 % methylene blue solutions for 3 days, 1 week and 2 weeks. Then thermal cycling was performed at the temperature of $60^{\circ}C$ and $4^{\circ}C$, followed by longitudinal sections on the center of tooth. Finally, staining on the cotton pellet was evaluated. The following results were obtained. 1. Stopping showed lower marginal sealing quality than Caviton, zinc oxide - eugenol and double sealing. 2. In 1 week group, Caviton showed higher marginal sealing quality than zinc oxide-eugenol, double sealing and stopping. 3. Caviton and double sealing (B) showed a great decrease in marginal sealing quality with the increse of time. 4. Caviton had high marginal sealing quality in 3 day group and 1 week group, but in 2 week group, Caviton showed a great decrease. 5. Double sealing (B) showed fairly high marginal sealing quality in 3 day group, but decreased greatly after 1 week on.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1496-1501
• /
• 2002

A $2{\times}3$ factorial arrangement of treatments was used in a completely randomized design to determine the effects of dietary Zn on performance and immune response of acutely endotoxemic growing pigs (n=96, mean BW=24.9 kg). Factors included 1) intramuscular injection of $10{\mu}g/kg$ BW of Escherichia coli lipopolysaccharide (LPS) or control and 2) supplemental Zn at 10, 50, or 150 ppm. Diets were fed beginning after weaning (initial body weight=7.6 kg) in the nursery and continued for 16 d into the grower phase. The basal corn-soybean meal grower diet contained 1% lysine and 34.3 ppm Zn. Pigs were acclimated for 12 d in the growerfinishing facility before LPS treatment on d 13. Gain, feed intake, and feed efficiency were unaffected by dietary Zn. Feed intake decreased (p<0.10) and gain/feed was greater (p<0.10) from d 13 to d 16 for pigs injected with LPS. Serum Zn and alkaline phosphatase activity increased (p<0.05) with increasing Zn levels. The febrile response to LPS peaked at 6 h post exposure and pigs were afebrile within 12 h. Rectal temperature was greater (p<0.05) in pigs receiving 50 and 150 ppm Zn than in pigs supplemented with 10 ppm Zn. In vivo cellular immune response, measured on d 13 by skin thickness response to phytohemagglutinin (PHA), was greater after 6 h (p<0.05) in pigs fed 10 ppm Zn and exposed to LPS compared to all other treatments, but was not affected at 12, 24 or 48 h. Zinc did not affect mitogen induced lymphocyte proliferation. Zinc supplemented at 50 or 150 ppm resulted in an enhanced febrile response in pigs subjected to iatrogenic endotoxemia, but did not affect pig performance or immune response measurements.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.524-530
• /
• 2006

$xCa(Li_{1/4}Nb_{3/4})O_{3}-(1-x)CaTiO_{3}$ ceramics were sintered under the presence of zinc-borosilicate(ZBS) glass and resultant microwave dielectric properties were investigated with a view to applying the composition to low-temperature co-fired ceramic(LTCC) technology. The addition of $5{\sim}15wt%$ ZBS glass ensured successful sintering below $900\;^{\circ}C$. In general, increased addition of ZBS glass increased sinterability but it decreased the quality factor($Q{\times}f_{0}$) significantly due to the formation of an excessive liquid and second phases. As for the addition of $CaTiO_3$, the dielectric constant(${\epsilon}_r$) and temperature coefficient of resonant frequency(${\tau}_f$) increased, while the quality factor($Q{\times}f_{0}$) did not show an apparent change. The sintered $0.9Ca(Li_{1/4}Nb_{3/4})O_{3}-0.1CaTiO_{3}$ specimen at $900\;^{\circ}C$ with 10 wt% ZBS glass demonstrated 39.6 in dielectric constant(${\epsilon}_r$), 4,400 in quality factor$(Q{\times}f_{0}),\;and\;-11ppm/^{\circ}C$ in temperature coefficient of resonant frequency(${\tau}_f$).