• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.197-202
• /
• 2001

M $g_{1-x}$ Z $n_{x}$O thin films with various composition x of ZnO were fabricated by a RF magnetron sputtering method, which is expected to improve the electro-optical properties of the conventional MgO protective layer for AC-PDP. Test panels with the $Mg_{1-x}$Z $n_{x}$O protective layer have been fabricated in order to investigate the effects of ZnO doping on the electrical characteristics of devices such as the discharge voltages and the memory gain. Experimental results revealed that test panels with the $Mg_{1-x}$Z $n_{x}$O(x=0.5at%) protective layer show lower firing and sustain voltages than those seen in panels with MgO protective layer by 20V. resulting in an increasement of the memory coefficient. In addition, it was found that test panels with the $Mg_{1-x}$Z $n_{x}$O protective layer show higher discharge intensity, i. e., higher plasma density, compared with panels with MgO protective layer.ve layer.layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.17-17
• /
• 2016

이중편파 레이더는 수평 수직반사도($Z_H{\cdot}Z_V$), 차등반사도($Z_{DR}$), 교차상관계수(${\rho}_{HV}$), 차등위상차(${\Phi}_{DP}$) 등 다양한 변수 산출을 통하여 대기 수상체 구분, 우적분포에 영향이 적은 강우량 추정, 밝은 띠(BB, Bright Band)의 탐지 등이 가능하게 됨으로써 수문기상 및 재해관리 분야에 활용성이 점점 더 커지고 있다. 본 연구는 RHI, PPI에서 생산된 레이더 변수를 이용하여 BB를 탐지하고 그 특성을 평가하였다. BB는 레이더를 이용하여 상층대기를 관측할 때 수직단면에서 강수입자가 눈에서 비로 변하는 구간에서 과대하게 높은 반사도가 나타나는 층을 말한다. BB에서는 QPE가 과대 추정되기 때문에, BB의 특성 파악은 레이더의 관측전략 수립과 QPE 보정에 필수적이다. 본 연구에서는 RHI에 의한 $Z_H$의 연직단면분석, RHI와 PPI의 고도각 경사거리(slant range) 빔의 ${\rho}_{HV}$, $Z_{DR}$, $Z_H$에 의한 분석을 통하여 BB의 상단부($BB_{TOP}$), 최정점($BB_{PEAK}$) 및 하단부($BB_{BOTTOM}$)의 고도를 상호 비교 평가하였다. 분석 자료는 KICT X-밴드 레이더에 의한 관측한 2015년 10월 21일의 층상운에 의한 강우를 이용하였다. RHI에 의한 $Z_H$의 연직단면 분석결과 $BB_{top}$, $BB_{bottom}$ 및 $BB_{peak}$는 KICT 레이더 고도(MSL : 40m)를 기준으로 각각 3.26Km, 2.3Km($BB_{width}$: 0.96km) 및 2.7Km로 나타났다. 이 같은 결과는 다른 2가지 분석방법에서도 유사하게 나타나고 있으며, 이는 BB분석을 위해 다양한 변수를 통한 신뢰성 있는 BB의 특성을 파악할 수 있는 기반을 제공한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.107-108
• /
• 1997

1. 서론 : 분리막 시설의 전처리방법에는 Sand Filter, 유니필터 그리고 케트리지(5$\mu$m) 필터가 상용되어 왔다. 그러나 Sand Filter와 유니필터 등은 설치비용은 저렴하지만 처리수질이 5$\mu$m 케트리지 필터보다 떨어지므로 분리막시설의 전처리로 미흡하다. 통상적인 분리막 시설의 설계시에 사용되는 5$\mu$m 케트리지 필터는 역세가 불가능하므로 교체하지만 대규모의 수처리설비나, SS의 농도가 높은 경우에 있어서 분리막의 전처리시설로 적합치 않다. 한편 5$\mu$m 케트리지 필터는 대체하기 위한 정밀여과장치가 많이 개발되고 있으며 Z필터, BMF, Cross Filter 등이 그러한 여과장치들이다. 본 글에서 소개할 VPMF(Variable Pore Micro Filter, 가변세공 정밀여과장치)도 그러한 여과장치와 유사한 기능과 성능을 가진 정밀여과장치이다. 본 연구에서는 Caolin을 이용하여 50~100ppm 사이의 SS농도하에서 VPMF의 처리수질, 역세효율, SS포집능력 등을 평가해 볼 것이다.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.415-421
• /
• 2009

A study was performed to investigate the isobaric effects of impurities in isotope measurement of gadolinium by TIMS. Especially, the ratio of $^{155}Gd/^{158}Gd$ showed the higher value than that of natural gadolinium and also decreased as the measuring time increased. This phenomenon is considered to be due to the oxide form of La ($LaO^+$, m/z=155) causing to create a serious bias on the measurement of $^{155}Gd$ abundance by La as an impurity, and due to $LaO^+$ produced more than the $Gd^+$ in the early time which disappears as the time goes on because of lower melting point and ionization potential of La than Gd. Although isobaric effects from Ba($BaO^+$), Ce($CeO^+$), Sm($SmO^+$), La($LaO^+$), and $K_4{^+}$(m/z=156)-cluster were detected even when blank rhenium filaments were used, these could be avoided by preconditioning(baking out) the filament. And we found that the measurement of $GdO^+$ instead of $Gd^+$ is more suitable in avoiding the isobaric effect from impurities such as La, Ce and Ba in the measurement of Gd isotope only in case of absence or extremely low level of Yb, Sm, Dy, Er, Lu.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.31-43
• /
• 2015

This study had been aimed to conduct the camera calibration on VLBI antenna in the Space Geodetic Observation Center of Sejong City with a low-cost digital camera, which embedded in a mobile phone to determine the three-dimension position coordinates of the VLBI antenna, based on stereo images. The initial values for the camera calibration have been obtained by utilizing the Direct Linear Transformation algorithm and the commercial digital photogrammetry system, PhotoModeler $Scanner^{(R)}$ ver. 6.0, respectively. The accuracy of camera calibration results was compared with that the camera calibration results, acquired by a bundle adjustment with nonlinear collinearity condition equation. Although two methods showed significant differences in the initial value, the final calibration demonstrated the consistent results whichever methods had been performed for obtaining the initial value. Furthermore, those three-dimensional coordinates of feature points of the VLBI antenna were respectively calculated using the camera calibration by the two methods to be compared with the reference coordinates obtained from a total station. In fact, both methods have resulted out a same standard deviation of $X=0.004{\pm}0.010m$, $Y=0.001{\pm}0.015m$, $Z=0.009{\pm}0.017m$, that of showing a high degree of accuracy in centimeters. From the result, we can conclude that a mobile phone camera opens up the way for a variety of image processing studies, such as 3D reconstruction from images captured.

• Journal of Life Science
• /
• v.22 no.11
• /
• pp.1456-1462
• /
• 2012

Sorafenib is a multikinase inhibitor and an oral anticancer drug approved for the treatment of patients with advanced renal cell carcinoma and those with unresectable hepatocellular carcinoma. The purpose of this study was to develop an efficient method of the determination of sorafenib in human plasma using tandem mass spectrometry coupled with liquid chromatography (LC/MS/MS) and validate the method by the guidelines of the Korean Food and Drug Administration (KFDA). Plasma samples ($100{\mu}l$) were added with chlorantraniliprole as an internal standard and then mixed with the 0.1% formic acid-containing extraction solution composed of isopropyl alcohol and ethyl acetate (1:4, v/v). After centrifugation, the supernatant was concentrated at $45^{\circ}C$ under negative pressure and centrifugal force. The residue was reconstituted with a mobile phase and injected into the HPLC instrument using a reverse phase Waters XTerra$^{TM}$ C18 column (particle size $3.5{\mu}m$). Liquid chromatography was carried out within the run time of 5 min using a mobile phase composed of buffer (0.1% formic acid and 10 mM ammonium formate), methanol, and acetonitrile (1:6:3, v/v/v). The analytes were monitored by tandem mass spectrometry in the multiple reaction monitoring method programmed to detect sorafenib at 'm/z 465.2 ${\rightarrow}$ 252.5' and chlorantraniliprole at 'm/z 484.4 ${\rightarrow}$ 286.2' with positive electrospray ionization mode ($ES^+$). The result showed the proper linearity ($r^2$ > 0.99) over the range of 2,000-5,000 ng/ml with good accuracy (90.7-103.9%) and precision (less than 10%). The newly developed method using LC/MS/MS was validated by the guideline of KFDA and identified as more sensitive compared to the previous methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.436-442
• /
• 2011

To obtain the engine output correctly is basically very important factor for estimating a engine performance. But, it has been reported that the IHP measured from electronic indicator such as MIPS(Mean Indication Pressure System) has a deviation compared to mechanical indicator. It was reported by authors that the uncertainty of crank angle for TDC position could be one of the reasons. In this paper, the uncertainty of crank angle for TDC position and its influence to engine output were investigated respectively about M/E and G/E for marine diesel engines. For the purpose, two sampling methods of pressure in cylinder were considered which were 'angle base sampling' and 'time base sampling'. Angle base sampling is real crank angle acquired from angle encoder which is attached to crank shaft and time base sampling is crank angle calculated by detected revolution with Z-pluse of encoder. Time base sampling is same method of MIPS. This paper concluded that time base sampling method is not suitable for obtaining the output of marine diesel engine on board because of instantaneous speed variation and load fluctuation. Also it is verified that the variation of engine speed by load fluctuation should be one of reasons additionally in case of M/E.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.485-491
• /
• 2010

Acquisition of information on failure slope, which may cause apprehension of second hand damage, requires acquisition of fast and accurate topographical data and efficient expression in indirect surveying method without accessing as needed. Therefore, in this study, the images on the intended area were photographed through hovering in the air by approaching collapsed road cut slope with the use of unmanned helicopter photography system. As a result of comparing the points observed by no prism total station and the 10 coordinate points analyzed through image analysis, the averages of absolute values were shown to be 0.056m in X axis direction, 0.082m in Y axis direction and 0.066m Z axis direction. In addition, the RMSE of the error for 10 points of test points were 0.015636m in X axis direction, 0.021319m in Y axis direction and 0.018734m in Z axis direction. Therefore, this method can determine the range of slope and longitudinal and cross sections of each slope in dangerous area that cannot be approached in relational image matching method for the terrains of such collapsed cut slope.

• ALGAE
• /
• v.20 no.4
• /
• pp.379-388
• /
• 2005

Seagrass bed is an important component in coastal and estuarine ecosystems, providing food and shelter to a wide variety of fauna. Recently, seagrass coverage has declined significantly due to anthropogenic influences such as reclamation, dredging, and eutrophication and consequently, necessity of seagrass habitat restoration is rising. Transplantation experiments with Zostera marina using TERFS, staple method, and shell method have been conducted at Dadae Bay, Kosung Bay and Jindong Bay on the south coast of Korea to select an optimal transplanting method for restoration of Z. marina habitat. Three experimental sites located at the vicinity of natural Z. marina beds with an average water depth of about 4m. Z. marina plants, which were collected from donor bed in Koje Bay were also transplanted at 7 different time from October 2003 to July 2004 to find appropriate transplanting time. Density of Z. marina was monitored monthly at both transplanted areas and natural beds. Transplantation using the staple method showed the highest survival rate of transplant. Shell method was also an effective transplanting method at muddy areas in Kosung Bay and Jindong Bay, but not suitable at sandy areas in Dadae Bay. These results suggest that sediment composition of transplanting areas should be considered for the selection of the optimal transplanting method. Z. marina transplanted during fall usually showed the highest survival rate, while most Z. marina plants transplanted in summer died due to high lethal temperature during this period.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.123-125
• /
• 2002

여러 사람에게서 생체신호를 측정하여 특징을 추출하는 경우 피실험자마다 다른 신체적 또는 생리학적 특징에 의해 같은 클래스로 분류하고 싶어도 다른 클래스로 잘못 분류되는 경우가 발생한다. 이와 같이 N 명의 사람에게서 얻은 생체신호로 M 개의 클래스를 분류하도록 훈련하여 새로운 사람의 생체신호를 M 개의 클래스로 분류하고자 할 때 발생하는 문제를 해결하기 위한 방법으로 피실험자 독립적인 클러스터링 방법을 제안하고자 한다. 이를 위한 수학적 기반으로 동치관계들의 교집합과 합집합에 근거한 새로운 연산자를 정의하고 이를 이용하여 최대 공통 클러스터(Largest Common Cluster, LCC)라는 새로운 개념을 정의한다 이는 여러 사람에게서 얻은 정보에서 최대한 공통의 성질을 갖는 것들을 찾아내는 수학적이고 체계적인 방법이라 할 수 있다. 따라서 일단 LCC를 찾아내면 이를 특징(feature)으로 삼아 패턴분류기를 설계하면 여러 사람에게 적용가능한 생체신호 인식기를 설계할 수 있게 된다.