• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.45-53
• /
• 2012

In this paper, we proposed the efficient addressing scheme for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. Therefore proposing x, y and z coordinate axes from divided address space of 16 bit to solve this problems. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than $Cskip$ algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verified performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduced the multi hop better than ZigBee distributed address assignmen.

• Journal of Korean Society on Water Environment
• /
• v.30 no.6
• /
• pp.632-637
• /
• 2014

Proficiency testing by interlaboratory comparisons is used to determine the performance of individual laboratories. In order to verify the quality of acute toxicity testing with Daphnia magna, National Institute of Environmental Research in South Korea is regularly organizing interlaboratory comparisons to estimate the analytical accuracy of different laboratories. Total 58 laboratories located in South Korea took part in interlaboratory proficiency testing scheme with three proficiency testing samples. TU(Toxic Unit) values of each laboratory were determined and robust z-score was calculated in order to evaluate the proficiency levels. Based on the robust z-score classification, 74% of the participant laboratories showed a satisfactory performance (43 laboratories). The main reason of 'unsatisfactory' performance seemed to be considered that the unsuitable management of test organism incubation system and the lack of experience on the identification of the test organism condition by effect of toxicity.

• International Journal of Automotive Technology
• /
• v.4 no.4
• /
• pp.181-191
• /
• 2003

Since the nonlinearity and uncertainties which inherently exist in vehicle system need to be considered in active suspension control law design, this paper proposes a new control strategy for active vehicle suspension systems by using a combined control scheme, i.e., respectively using a genetic algorithm (GA) based self-tuning PID controller and a fuzzy logic controller in two loops. In the control scheme, the PID controller is used to minimize vehicle body vertical acceleration, the fuzzy logic controller is to minimize pitch acceleration and meanwhile to attenuate vehicle body vertical acceleration further by tuning weighting factors. In order to improve the adaptability to the changes of plant parameters, based on the defined objectives, a genetic algorithm is introduced to tune the parameters of PID controller, the scaling factors, the gain values and the membership functions of fuzzy logic controller on-line. Taking a four degree-of-freedom nonlinear vehicle model as example, the proposed control scheme is applied and the simulations are carried out in different road disturbance input conditions. Simulation results show that the present control scheme is very effective in reducing peak values of vehicle body accelerations, especially within the most sensitive frequency range of human response, and in attenuating the excessive dynamic tire load to enhance road holding performance. The stability and adaptability are also showed even when the system is subject to severe road conditions, such as a pothole, an obstacle or a step input. Compared with conventional passive suspensions and the active vehicle suspension systems by using, e.g., linear fuzzy logic control, the combined PID and fuzzy control without parameters self-tuning, the new proposed control system with GA-based self-learning ability can improve vehicle ride comfort performance significantly and offer better system robustness.

• Journal of Korea Water Resources Association
• /
• v.38 no.12 s.161
• /
• pp.1039-1049
• /
• 2005

The objective of this study is to produce optimal radar-derived rainfall for hydrologic utilization. The ground clutter and beam blockage effects from Mt. Kwanak station (E.L 608m) are removed from radar reflectivities by POD analysis. The reflectivities are used to produce radar rainfall data in the form of rain rates (mm/h) by the application of the Marshall-Palmer reflectivity versus rainfall relationship. However, these radar-derived rainfall are underestimated in temporal and spatial scale compared with observed one, so it is necessary to hire a correction scheme based on the gauge-to-radar (G/R) statistical adjustment technique. The selected watershed for studying the real-time correction of radar-rainfall estimation is the Soyang dam site, which is located approximately 100km east of Kwanak radar station. The results indicate that adjusted radar rainfall with the gauge measurement have reasonal G/R ratio ranged on 0.95-1.32 and less uncertainty with that mean standard deviation of G/R ratio are decreased by $9-28\%$. Mean areal precipitation from adjusted radar rainfall are well agreed to the observed one on the Soyang River watershed. It is concluded that the real-time bias adjustment scheme is useful to estimate accurate basin-based radar rainfall for hydrologic application.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2007

We investigated analytically and numerically the occurrence of modulation instability in fibers with periodic changes both in dispersion and gain. Previously, it has been known that the modulation instability is suppressed in dispersion managed solitons where dispersion is managed in such a way that the local dispersion alternates between the normal and the anomalous regimes. In this work, we enhanced the advantage of the dispersion management scheme by additionally introducing proper gain/loss profiles in fibers. The gain/loss profile is given by $\Gamma(z)=0.5/D(z)*(dD/dz)$, where D(z) represents the dispersion profile. The fundamental gain spectra of the modulation instability in the dispersion and gain managed fibers have been derived analytically and confirmed by numerical calculation. Our investigation reveals that in the dispersion and gain fibers the modulation instabilities are always much more suppressed compared to the case with only dispersion managed. In practical dispersion management schemes, dispersion profiles show discontinuity. and thus. the corresponding gain/loss profiles tend to be finite. In these cases, the gain/loss profiles were approximated by lumped gains/losses of finite values. Our numerical calculations confirm that this approximation also works well.

• Journal of Digital Contents Society
• /
• v.15 no.6
• /
• pp.663-673
• /
• 2014

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. In this paper, we proposed the efficient addressing scheme for improving the performance of routing algorithm by using ZigBee in WBAN environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. Therefore proposing x, y and z coordinate axes from divided address space of 16 bit to solve this problems. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than Cskip algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verified performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduced the multi hop better than ZigBee distributed address assignment

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.957-960
• /
• 2006

In this paper, we studied the location estimation algorithm of a spatial 3 dimension which extend the location estimation algorithm of a plane 2 dimension in 2.45GHz band RTLS(Real time location system). We used TDOA scheme which need not a time of transmission information of the tag and estimated 3 dimension coordinates. Also, estimated intersection of hyperbolic curve to X, Y coordinate of the tag at 2D coordinates searching area, $300m\times300m$ and LOS propagation environments. And, we estimated Z coordinate ultimately using X, Y coordinate. The location estimation algorithm of a spatial 3 dimension satisfies the RTLS specification requirement, 3m radius accuracy. From the result, we confirm that the location of tag which similar to actual coordinate in the case to an ideal received offset. However, we verified that the location of tag which escapes from a radius 3m within error range when received offset increased. Therefore, as the future work we are consider enhanced location accuracy of a spatial 3 dimension in RTLS system which using the decrease scheme of reader offset or the discriminate scheme of the estimation location.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.49.1-49.1
• /
• 2013

We present a new galaxy classification scheme in the Wide-field Infrared Survey Explorer (WISE) [$3.4{\mu}m$]-[$12{\mu}m$] color versus $12{\mu}m$ luminosity diagram. In this diagram, galaxies can be classified into three groups in different evolutionary stages. Late-type galaxies are distributed linearly along "MIR star-forming sequence" identified by Hwang et al. (2012). Some early-type galaxies show another sequence at [3.4]-[12] $(AB){\simeq}-2.0$, and we call this 'MIR blue sequence'. They are quiescent systems with old stellar population older than 10 Gyr. Between the MIR star-forming sequence and the MIR blue sequence, some early- and late-type galaxies are sparsely distributed, and we call these galaxies 'MIR green cloud galaxies'. Interestingly, both MIR blue sequence galaxies and MIR green cloud ones lie on the red sequence in the optical color-magnitude diagram. However, MIR green cloud galaxies have lower stellar masses and younger stellar populations (smaller $D_n4000$) than MIR blue sequence galaxies, suggesting that MIR green cloud galaxies are in the transition stage from MIR star-forming sequence galaxies to MIR blue sequence ones. We present differences in various galaxy properties between the three MIR classes using a multi-wavelength data, combined with the WISE and Sloan Digital Sky Survey Data Release 10, of local (0.03 < z < 0.07) galaxies.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.4
• /
• pp.11-19
• /
• 2001

In this paper, we study the convergence property of iterative learning control (ILC). First, we present a new method to prove the convergence of ILC using sup-norm. Then, we propose a new type of ILC algorithm adopting intervalized learning scheme and show that the monotone convergence of the output error can be obtained for a given time interval when the proposed ILC algorithm is applied to a class of linear dynamic systems. We also show that the divided time interval is affected from the learning gain and that convergence speed of the proposed learning scheme can be increased by choosing the appropriate learning gain. To show the effectiveness of the proposed algorithm, two numerical examples are given.

• Proceedings of the KSEEG Conference
• /
• 1999.04a
• /
• pp.90-93
• /
• 1999

We present a high frequency electromagnetic (EM) inversion scheme for detecting and characterizing a fracture using single-hole data. At high frequencies, say above tens of mega-hertz, since displacement currents cannot be ignored, electrical permittivity as well as electrical conductivity is to be considered together for analyzing the EM scattering data. In this paper, we have developed a three-step inversion scheme to map the fracture and to evaluate its electrical conductivity and permittivity. We performed EM profiling along the z-axis using three-component receivers for each source. The model was excited by a vertical magnetic dipole and the resistant magnetic fields were inverted using the non-linear least-squares method. Background resistivity and permittivity were easily obtained using vertical magnetic fields below 1 MHz and above 10 MHz, respectively. Both the vertical and dipping sheets were successfully mapped using the phase difference between 40 and 41 MHz. The electrical property of the sheet was well resolved using the information obtained in the previous two steps and secondary magnetic fields. Our study shows the potential of imaging the fracture in single-hole survey environment using the high frequency EM method.