• Wind and Structures
• /
• v.8 no.3
• /
• pp.163-178
• /
• 2005

Wind-induced mean and dynamic interference effects of tall buildings are studied in detail by a series of wind tunnel tests in this paper. Interference excitations of several types of upwind structures of different sizes in different upwind terrains are considered. Comprehensive interference characteristics are investigated by artificial neural networks and correlation analysis. Mechanism of the wakes vortex-induced resonance is discussed, too. Measured results show significant correlations exist in the distributions of the interference factors of different configurations and upwind terrains and, therefore, a series of relevant regression equations are proposed to simplify the complexity of the multi-parameter wind induced interference effects between two tall buildings.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.1045-1050
• /
• 1988

The problem of applying the linear integral filter in analysis and parameter estimation of linear continuous systems is discussed. A discrete-time model, which is equivalent to that obtained using the bilinear z transformation, is derived and employed to predict system output. It is shown that the output error can be controlled through the sampling interval. In order to obtain unbiased estimates, an instrumental variable (IV) method is proposed, where the instrumental variables are constituted using adaptive filtering. Some problems on implementation of the recursive IV algorithm are discussed. Both theoretical analysis and simulation study are given to illustrate the proposed methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.195-205
• /
• 1997

The propulsion marine diesel engine have been widely applied with a mechanical- hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechani¬cal - hydraulic governor to control the speed of engine under the condition of low speed and low load because of jiggling by rough fluctuation of rotating torque and hunting by dead time of Desiel engnie The performance improvement of mechanical - hydraulic governor is required to solve these problems of control system. The electro - hydraulic governor using PID algorithm is provided to compensate the faults of mechanical- hydraulic governor. In this paper, in order to analyze the ship speed control system, the transfer function was converted from the z tansformation to w transformation. The influence of dead time changing by engine speed which induces hunting phenomena was investigated by Nichols chart of w plane. As a method of performance improvement of mechanical hydraulic governor, a Eletro - hydraulic governor shows that fine control results can be obtained through optimal parameter tuning of PID

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.6 no.3
• /
• pp.53-57
• /
• 2007

This paper presents a geometrical error compensation of tool alignment for B axis controlled machine. In precision machining, tool alignment is crucial parameter for machined surface. To decrease tool alignment error, plus tilted tool from B axis center is touched to reference work piece and checked the deviation from original position. Same process is performed in minus tilt. Comparing these 2 touch positions, wheel alignment error in X axis and Z axis can be calculated on B axis center. Experimental results show that this compensation method is efficient to correct tool alignment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.184-187
• /
• 1997

Coordinate measuring machines(CMMs) are used to obtain the dimensional information with micron accuracy. This paper is concerned with the development of the horizontal arm type coordinate measuring machine using open architecture controller. The coordinate measuring machine considered in this paper consists of three orthogonal axes in the x, y and z directions. Open architecture controller IS used to implement a measuring system which can be fulfill to various needs of endusers of coordinate measuring machines. The open architecture controller presented here is embodied in personal computers. The programs and man-machine interfaces(MM1) are developed for various measuring conditions. Through the computer simulation based on the mathematical models of the coordinate measuring machine, control parameters are optimally tuned.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.68-77
• /
• 1995

The two-dimensional pressure distribution, which is the most important parameter in the casting cleaning installations(CCI), was analyzed using the K-FIX computer program for two-phase flow. Modelling was done using R-Z coordinates for the initial and boundary conditions which don't have periodic influx and efflux, and also there was the electric discharge due to high pressure and temperature. The marked particles were introduced to prodict the structure and the size of main and local moving surfaces. The initial and boundary conditions were modified due to the internal structure of CCI.From the results of numerical analysis, it was shown that the maximum pressure on casting was increased with the increase of a water level. The pressure on casting in the radial direction was higher than that in axial direction. Also, it was proved that by introducing the marked particles it was possible to predict the surface structure in case of two-phase flow.

• Structural Engineering and Mechanics
• /
• v.58 no.6
• /
• pp.1001-1020
• /
• 2016

The study is to investigate the free vibration of antisymmetric angle-ply conical shells having non-uniform sinusoidal thickness variation. The arbitrarily varying thickness is considered in the axial direction of the shell. The vibrational behavior of shear deformable conical shells is analyzed for three different support conditions. The coupled differential equations in terms displacement and rotational functions are obtained. These displacement and rotational functions are invariantly approximated using cubic spline. A generalized eigenvalue problem is obtained and solved numerically for an eigenfrequency parameter and an associated eigenvector of spline coefficients. The vibration characteristic of the shells is examined for cone angle, aspect ratio, sinusoidal thickness variation, layer number, stacking sequence, and boundary conditions.

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.137-152
• /
• 2008

The work presented in this paper includes material characterisation and an investigation of suitability in seismic dampers for two commercially available NiTi-alloys, along with a numerical analysis of a new damper system employing composite NiTi-wires. Numerical simulations of the new damper system are conducted, using Brinson's one-dimensional constitutive model for shape memory alloys, with emphasis on the system's energy dissipation capabilities. The two alloys tested showed some unwanted residual strain at temperatures higher than $A_f$, possibly due to stress concentrations near inclusions in the material. These findings show that the alloys are not ideal, but may be employed in a seismic damper if precautions are made. The numerical investigations indicate that using composite NiTi-wires in a seismic damper enhances the energy dissipation capabilities for a wider working temperature range.

• Electronics and Telecommunications Trends
• /
• v.13 no.2 s.50
• /
• pp.10-28
• /
• 1998

무선 ATM에서는 위치관리 기법으로는 PNNI 라우팅 프로토콜의 확장과 기존의 셀룰러 전화망의 위치 등록기 개념에 근거한 방식들이 제안되고 있는데 크게 Mobile PNNI 방식과 Location Register(LR) 방식으로 나누어진다. Mobile PNNI 방식은 기존의 PNNI 라우팅 프로토콜을 기반으로 하여 단말기의 이동성을 제공할 수 있도록 수정 확장한 위치 관리 기법이다. Mobile PNNI 방식에서는 단말기가 이동할 경우에 영역 변수(scope parameter) S에 의해 제한된 범위 내에서 교환국 간에 reachability information이 갱신되며, 이러한 정보를 이용하는 PNNI 라우팅 프로토콜을 기반으로 하여 위치 추적과 호 설정이 동시에 수행된다. LR 방식은 Mobile PNNI 방식과는 달리 발신호가 발생하게 되면, 계층적인 구조의 위치 등록기들의 추적을 통해 상대편 이동 단말기가 접속된 교환국의 위치 정보를 알아낸 다음, 호 설정 과정을 수행하게 된다. 본 연구에서는 무선 ATM에서의 여러 가지 위치관리 요구사항을 살펴보고, 위에서 언급한 두 가지 방식에 대하여 자세히 소개하고, 이들을 비교 분석한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.60.3-61
• /
• 2018

Abell 115 is a renowned cluster merger at z=0.197. It exhibits an asymmetric X-ray distribution with cometary tails and a megaparsec-sized radio relic stretching in the northeastern direction from the core of the northern cluster. Many observations have concluded that this cluster merger has a large impact parameter, but there has been no numerical analysis on the structure of Abell 115. In this study, we simulate Abell 115 with Gadget2 N-body/SPH code to reproduce the X-ray and weak lensing features of Abell 115. We find a new plausible merger scenario of Abell 115, wherein the northern cluster is currently in an outgoing phase. The predicted X-ray emission has a similar morphology to the observed tail of the northern cluster. However, in order to reproduce the observed line-of-sight velocity and projected distance while maintaining the two systems gravitationally bound, the system should possess a large projection angle, which makes the shock look considerably more diffused than the observed radio relic.