• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.83-88
• /
• 1995

In this paper, the solid modeller suitable for PC was developed for Top-down 3-D representation and analysis of fixed offshore structures. Also solid modelling and hidden line removal were conducted in order to visualize the offshore structures based on the scan line z-buffer algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.633-641
• /
• 2008

This study introduces the method of detecting and restoring occlusion areas by using epipolar algorithm and K-means classification algorithm for true ortho-photo generation. In the past, the techniques of detecting occlusion areas are using the reference images or information of buildings. But, in this study the occlusion areas can be automatically detected by using DTM data and exterior orientation parameters. The detected occlusion areas can be restored by using anther images or the computed values which are determined in K-means classification algorithm. In addition, this method takes advantages of applying epipolar algorithm in order to find same location in overlapping areas among images.

• Spatial Information Research
• /
• v.15 no.4
• /
• pp.363-370
• /
• 2007

This study has been carried for the development of the basic algorithm of helicopter navigation system based on TRN (Terrain Referenced Navigation) with information input from the GPS. The helicopter determines flight path due to Origination-Destination analysis on the Cartesian coordinate system of 3-D DTM. This system shows 3-D mesh map and the O-D flight path profile for the pilot's acknowledgement of the terrain, at first. The system builds TCF (terrain clearance floor) far the buffer zone upon the surface of ground relief to avid the ground collision. If the helicopter enters to the buffer zone during navigation, the real-time warning message which commands to raise the body pops up using Matlab menu. While departing or landing, control of the height of the body is possible. At present, the information (x, y, z coordinates) from the GPS is assumed to be input into the system every 92.8 m of horizontal distance while navigating along flight path. DTM of 3" interval has been adopted from that which was provided by ChumSungDae Co., Ltd..

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.79-89
• /
• 1984

In this paper we present development of microprocessor-based 8-channel statistical multiplexer (SMUX). The hardware design includes one Z-80A CPU board with the clock rate of 4 MHz, one 16 Kbyte ROM board for program storage, one 16 Kbyte dynamic RAM board and three I/O boards, all connected through an S-100 compatible tristate bus. The SMUX can presently multiplex 8 channels with data rates ranging 50 bps to 9600 bps, but can be reduced to accommodate 4 channels by having a slight modification of software and removing one terminal I/O board. The system specifications meet CCITT recommendations X.25 link level, V.24, V.28, X.3 and X.28. Significant features of the SMUX are its capability of handling 4 input codes (ASCII, EBCDIC, Baudot, Transcode), the use of a dynamic buffer management algorithm, a diagnostic facility, and the efficient use of a single CPU for all system operation. Throughout the paper, detailed explanations are given as to how the hardware and software of the SMUX system have been designed efficiently.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.195-199
• /
• 2008

We present an approach to detect real plane for line base recognition and pose estimation Given 3D line segments, we set up reference plane for each line pair and measure the normal distance from the end point to the reference plane. And then, normal distances are measured between remains of line endpoints and reference plane to decide whether these lines are coplanar with respect to the reference plane. After we conduct this coplanarity test, we initiate visibility test using z-buffer value to prune out ambiguous planes from reference planes. We applied this algorithm to real images, and the results are found useful for evidence fusion and probabilistic verification to assist the line based recognition as well as 3D pose estimation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.126-134
• /
• 2006

This paper describes the development of an embedded wireless LAN controller which can be in parallel operated with an existing utility controller. The embedded controller mainly consists of Prism(R) 2.5 chip set and Atmega 128 microcontroller. In order to communicate over the network, the controller including TCP/IP stack (IP, TCP, UDP, and ICMP), telnet, and X/Z modem has been developed. For a specific application, we have proposed an special method to convert data structure between TCP/IP and X/Z modem and a data buffer algorithm to minimize the RAM memory usage. Finally, the correctness and performance of the protocols are tested and verified using $CommView^{(R)}\;and\;DU^{(R)}$. The development is satisfactorily operated only for 3,381 bytes of RAM usage without sacrificing interoperability between hosts.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.85-95
• /
• 2008

Characteristically, 3D graphic algorithms have to perform complex calculations on massive amount of stream data. The vertex and pixel shaders have enabled efficient execution of graphic algorithms by hardware, and these graphic processors may seem to have achieved the aim of "hardwarization of software shaders." However, the hardware shaders have hitherto been evolving within the limits of Z-buffer based algorithms. We predict that the ultimate model for future graphic processors will be an algorithm-independent integrated shader which combines the functions of both vertex and pixel shaders. We design the register file model that supports 3-dimensional computer graphic on the programmable unified shader processor. we have verified the accurate calculated value using FPGA Virtex-4(xcvlx200) made by Xilinx for operating binary files made by the implementation progress based on synthesis results.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.296-305
• /
• 2016

This paper proposes a framework to automatically align Dental range image captured by depth sensors like the Microsoft Kinect. Aligning dental images by intraoral scanning technology is a difficult problem for applications requiring accurate model of dental-scan datasets with efficiency in computation time. The most important thing in dental scanning system is accuracy of the dental prosthesis. Previous approaches in intraoral scanning uses a Z-buffer ICP algorithm for fast registration, but it is relatively not accurate and it may cause cumulative errors. This paper proposes additional Alignment using the rough result comes after intraoral scanning alignment. It requires that Each Depth Image of the total set shares some overlap with at least one other Depth image. This research implements the automatically additional alignment system that aligns all depth images into Completed model by computing a network of pairwise registrations. The order of the each individual transformation is derived from a global network and AABB box overlap detection methods.

• Korean Journal of Remote Sensing
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2006

IKONOS images have the perspective geometry in CCD sensor line like aerial images with central perspective geometry. So the occlusion by buildings, terrain or other objects exist in the image. It is difficult to detect the occlusion with RPCs(rational polynomial coefficients) for ortho-rectification of image. Therefore, in this study, we detected the occlusion areas in IKONOS images using the nominal collection elevation/azimuth angle and restored the hidden areas using another stereo images, from which the rue ortho image could be produced. The algorithm's validity was evaluated using the geometric accuracy of the generated ortho image.