• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1994.11a
• /
• pp.9-13
• /
• 1994

인산형 연료전지내 열 및 물질전달 특성에 대하여 FDM과 시행착오법에 의하여 3차원 해석이 이루어졌다. Z병행류와 Z대향류를 대상으로 냉각공기 유입방향을 바꿔가며 전류밀도가 평균온도, 전압, 온도분포차, 전류밀도분포차에 미치는 영향에 대하여 고찰하였다. 본 연구의 결과로 Stack에서의 최적조건을 도출하여 연료전지의 성능향상에 도움이 되리라 기대된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.285-290
• /
• 2007

본 논문에서 구현하고자 하는 유비쿼터스 컴퓨팅 응용에 필요한 위치 인식 시스템의 주 요소는 블루투스 프로토콜 스택(BlueZ)에서 제공하는 RSSI(Received Signal Strength Indicator) 값을 측정하는 블루투스 AP, 측정된 RSSI 값을 위치 인식 서버에 전달하기 위한 무선 AP 공유기 그리고, 받은 데이터로 위치 값을 측정하는 위치 인식 서버 및 Context Broker(고 수준의 상황 정보를 추론하는 서버 역할)로 이루어져있다. 전체적인 동작 시스템은 위치 값을 측정하고자 하는 이동 매제(마스터)를 중심으로 최대 여덟 개까지 네트워크가 가능한 블루투스 AP(슬레이브)장치로 구성된 피코넷(Piconet) 영역에서 삼각측량 필요에 적절한 세 개의 블루투스 AP를 RSSI값을 이용하여 분류 한 후 이동 매체의 위치를 측정한다. 그 결과로 나온 데이터는 피코넷 영역에서 가장 가까운 무선 AP 공유기를 거쳐서 위치 값을 측정하는 위치 인식 서버에 전달한 후, 그 결과 값으로 Context Broker에서 상황 정보를 추론해서 Community Manager에서 유비쿼터스 컴퓨팅 응용에 맞게 서비스를 구현한다. 또한, 위와 같은 시스템 내부 구조 된 데이터처리는 리눅스 운영체제 내에서 디바이스 드라이버와 사용자 프로그램으로 구현된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.260-263
• /
• 2005

The effects of internal manifold designs the reactant feed-stream in Polymer Electrolyte Fuel Cells (PEFCs) is studied to figure out mass flow-distribution patterns over an entire fuel cell stack domain. Reactants flows are modeled either laminar or turbulent depending on regions and the open channels in the bipolar plates are simulated by porous media where permeability should be pre-determined for computational analysis. In this work, numerical models for reactant feed-stream in the PEFC manifolds are classified into two major flow patterns: Z-shape and U-shape. Several types of manifold geometries are analyzed to find the optimal manifold configurations. The effect of heat generation in PEFC on the flow distribution is also investigated applying a simplified heat transfer model in the stack level (i.e. multi-cell electrochemical power-generation unit). This modeling technique is well suited for many large scale problems and this scheme can be used not only to account for the manifold flow pattern but also to obtain information on the optimal design and operation of a PEMC system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.10
• /
• pp.126-134
• /
• 2006

This paper describes the development of an embedded wireless LAN controller which can be in parallel operated with an existing utility controller. The embedded controller mainly consists of Prism(R) 2.5 chip set and Atmega 128 microcontroller. In order to communicate over the network, the controller including TCP/IP stack (IP, TCP, UDP, and ICMP), telnet, and X/Z modem has been developed. For a specific application, we have proposed an special method to convert data structure between TCP/IP and X/Z modem and a data buffer algorithm to minimize the RAM memory usage. Finally, the correctness and performance of the protocols are tested and verified using $CommView^{(R)}\;and\;DU^{(R)}$. The development is satisfactorily operated only for 3,381 bytes of RAM usage without sacrificing interoperability between hosts.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.435-437
• /
• 2004

In this paper, we aim to design and implement supporting IPv6 Bluetooth Access point(AP) in Linux. Bluetooth is a cable replacement technology designed for short range ad-hoc connections, which most likely change the way we handle and access information in the near future. In Personal Area Network(PAN) mobile devices need many IP address space, then we need next generation Internet Protocol(IPv6). We designed Bluetooth Access Point with Bluetooth stack and MAC bridge function in Linux. The implementation tested on Linux system based on Bluetooth Access Point with other Bluetooth devices.

• Advances in Computational Design
• /
• v.1 no.4
• /
• pp.357-370
• /
• 2016

This paper aims to examine the dynamic response of a newly designed ultrasonic motor under half-sine shock impulses. Impact shock was applied to the motor along x, y or z axis respectively with different pulse widths to check the sensitivity of the motor to the shocks in different directions. Finite Element Analysis (FEA) with the ANSYS software was conducted to obtain the relative displacement of a key point of the motor. Numerical results show that the maximum relative displacement is of micro meter level and the maximum stress is five orders smaller than the Young's modulus of the piezo material, which proves the robustness of the motor.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.749-754
• /
• 1996

본 논문은 CANDU형 원자력 발전소의 수조 속에 저장된 사용후핵연료 다발에 대한 IAEA 보장조치(Safeguards) 방법(Method K)을 종합적으로 분석하여 국가사찰을 보다 효율적으로 준비하고자 한다. 현재 IAEA는 수중카메라(Underwater TV Camera)를 수조 속에 넣고 카메라 모니터에 나타난 사용후핵연료 끝단의 영상을 직접 확인하면서 Tray Stack에 담겨 있는 수직축(Z-축) 방향 사용후핵연료 다발 수량을 확인하고 있다. 그러나 한정된 사찰기간 내에 보장조치 목적(Safeguards Goal)을 달성하기 위해 IAEA가 적용하고 있는 수중 카메라 보조장치(Guiding Tool)는 몇 가지 문제점을 갖고 있는 것으로 분석되었다. 따라서 이와 같은 문제점을 해결하면서 보다 효율적으로 사찰활동을 지원할 수 있는 보조장치를 개발하는 것이 IAEA와 국가사찰을 위해 필요하다. 이를 위해 한정된 사찰기간 내에 최소의 인력으로 효과적인 사찰활동을 지원할 수 있는 보조장치를 새로이 설계하였다. 그리고 새로이 설계된 수중카메라 보조장치를 IAEA 및 국가사찰에 적용했을 경우 얻을 수 있는 기대 효과 등을 논의하였다.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2019

Recently, ultra-low latency flash storage devices such as Z-SSD and Optane SSD were introduced with the significant technological improvement in the storage devices which provide much faster response time than today's other NVMe SSDs. With such ultra-low latency, $10{\mu}s$, storage devices the cost of context switch could be an overhead during interrupt-driven I/O completion process. As an interrupt-driven I/O completion process could bring an interrupt handling overhead, polling or hybrid-polling for the I/O completion is known to perform better. In this paper, we analyze tail latency problem in a polling process caused by process scheduling in data center environment where multiple applications run simultaneously under one system and we introduce our adaptive polling selection technique which dynamically selects efficient processing method between two techniques according to the system's conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.173-178
• /
• 2019

Recently, the types and amount of data generated, collected, and measured in IoT such as smart home, security, and factory are increasing. The technologies for IoT service include sensor devices to measure desired data, embedded software to control the devices such as signal processing, wireless network protocol to transmit and receive the measured data, and big data and AI-based analysis. In this paper, we focused on developing a gateway for interfacing heterogeneous sensor network protocols that are used in various IoT devices and propose a heterogeneous network interface IoT gateway. We utilized a OpenWrt-based wireless routers and used 6LoWAN stack for IP-based communication via BLE and IEEE 802.15.4 adapters. We developed a software to convert Z-Wave and LoRa packets into IP packet using our Python-based middleware. We expect the IoT gateway to be used as an effective device for collecting IoT big data.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1495-1501
• /
• 2018

We have developed an extended three-dimensional free-electron laser (3D FEL) code with source-dependent expansion to calculate the intensity of the radiation field and the spot size in a free-electron laser oscillator. The effect of the wiggler field errors was evaluated for the case of a planar wiggler generated by a magnet stack with parabolic shaped pole faces by using the extended three-dimensional equations in a free-electron laser oscillator based on the proposed FEL facility which is to be operated in the far-infrared and the infrared regions. The radiation spot size due to the wiggler field errors also have been analyzed for wiggler errors of ${\Delta}B/B=0.0$, 0.03, 0.06 and 0.09% at z = 1 m and z = 2 m. The effect of the diffraction of radiation field due to the wiggler field errors of ${\Delta}B/B=0.0$ and ${\Delta}B/B=0.09%$ at 200 passes was evaluated by using the extended 3D code that we developed. The variation of the curvature of the phase front and the effect of the radiation field intensity due to the wiggler field errors were also evaluated for B = 0.5 T and B = 0.7 T with the wiggler error of ${\Delta}B/B=0.09%$ at 200 passes and the results were compared to those of without errors. The intensity of the radiation, behavior of the radiation spot size and the variation of the curvature of the phase were highly sensitive to the wiggler error of ${\Delta}B/B$ > 0.09%, but were less sensitive to the wiggler errors for ${\Delta}B/B$ < 0.09% in a free-electron laser (FEL) oscillator based on the proposed FEL facility.