• Proceedings of the Korean Society for Language and Information Conference
• /
• 2002.02a
• /
• pp.290-295
• /
• 2002

Since thesaurus is used as a knowledge resource in many natural language processing systems, it is very useful and necessary for the high quality systems, especially for dealing with semantics. In this paper, we introduce a semi-automatic method for the construction of Korean noun semantic hierarchy by utilizing a monolingual MRD and an existing thesaurus.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.537-554
• /
• 2006

Water levels of thermal groundwater ($>30^{\circ}C$) were recorded from March 2002 to June 2006 at several monitoring wells within the Yuseong spa area. Using these data, we elucidated the long-term cyclic fluctuations of thermal groundwater levels with 1 year period. We also observed a noticeable water level variation with periods of 0.5, 1 and 7 days in most monitoring wells, which indicates relatively good hydraulic connectivity within the main hotspring area. By comparing water level variations among several wells, we found out that E-W and N-S trending geological structures should be an important control factor for emplacement and flow of thermal groundwater in the study area. It may be also inferred that geothermal source is highly associated with the hydraulic connectivity of aquifers at the Yuseong spa area.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.507-513
• /
• 2002

To delineate the relationship between dynamic elastic modulus and lithologies, suspension PS logging was applied to Yuseong granite, Paldang banded gneiss, and Sabuk sedimentary rock. P and S wave velocities were also measured for these lithologies. In addition, uniaxial strength and Poisson’s ratio were measured in a laboratory for Yuseong granite and Paldang banded gneiss. In laboratory measurements, P and S wave velocities in Paldang banded gneiss were higher than those in Yuseong granite whereas Poisson’s ratio in Paldang banded gneiss was lower than that in Yuseong granite. This implies that P and S wave velocities correlate reversely with Poisson’s ratio. The dynamic Young modulus obtained from suspension PS logging was high compared to the dynamic bulk modulus and the dynamic shear modulus.

• Toxicological Research
• /
• v.18 no.3
• /
• pp.241-248
• /
• 2002

The present study was conducted to investigate the potential subacute toxicity of CJ-10882 by a 4-week repeated oral dose in dogs. The test article was administered once dally by gavage to dogs at dose levels of 0, 2, 10, and 50 mg/kg/day for 4 weeks. During the test period, clinical signs, mortality, body weights, food consumption, ophthalmoscopy, urinalysis, hematology, serum biochemistry, gross finding, organ weight, and histopathology were evaluated. Several clinical sign were observed in treated dogs at 50 mg/kg, including salivation and vomiting. Increase in the serum level of ALT and albumin observed in the female 50 mg/kg group was considered as a toxic effect related to the test article since the histopathological change in Liver was accompanied. There were no treatment-related effects on mortality, food and water consumption, ophthalmoscopy, urinalysis, hematology, serum biochemistry, necropsy findings and organ weights in any treatment group. Based on these results, target organ was not observed and the no-observed-adverse-effect level (NOAEL) was 10 mg/kg/day and the absolute toxic dose was 50 mg/kg for both male and female dogs.

• Journal of Korea Foresty Energy
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1982

To study tile comparison of aboveground biomass of Pinus rigida Mill. of 18-year-old, plantations located in Whaseong, Yuseong and Wanju district were selected. Ten sample trees in each district selected taking account of DBH distribution were felled carefully to minimize loss of branches and stem analysed by 1m lag segment sectioned from base . The tree height and DBH were measured for sample trees in total growing within $200m^2$ experimental plot. The diagram of oven-dry weight distribution of stem, branch and needle for each 1m segment was constructed. The logarithmic regression equations between dry weight of each component and the two variables, $DBH^2$ and tree height, combined term were presented. The standing crops in the sample stand was estimated to be as much as 23.88, 54.09 and 42.68 tons of dry matter, above ground , per ha in Whaseong, Yuseong anf Wanju district respectively. Annual net production was estimated at 253,657 and 3.65 tons per ha per year respectively. The net assimilation rate was 1.65,1.95 and 1.81 kg/kg/yr in Whaseong, Yuseong and Wanju district respectively. The efficency of leaf to produce stem was 0.99, 1.12 and 1.30 kg/kg/yr respectively.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.2
• /
• pp.253-269
• /
• 2010

This study analyzed image similarity, attribute recognition, and preference by multidimensional scaling. The analyses were carried out by 10 spa destinations (Deoksan, Bugok, Onyang, Yuseong, Suanbo, Bomun, Dongrae, Asan, Dogo, Haeundae) in Korea. The results were as follows: First, according to the analyses of image similarity of spa destinations, 'Haeundae, Dongrae and Bomun,' 'Dogo, Onyang, Asan,' and 'Deoksan, Suanbo, Bugok,' made similar image groups separately. However, Yuseong had different image from the other spa destinations in the above. Second, according to the analyses of attribute recognition of spa destinations, Deoksan and Bugok had more competitive ability in terms of 'the incidental facilities of spa destinations, 'Yuseong, Onyang, Asan, and Dogo' showed high competitiveness in terms of 'accessibility of spa destination' and 'tourism conditions.' Haeundae, Dongrae, and Suanbo had weak competitiveness in terms of 'the accessibility of spa destinations.' Third, according to the analyses of preference about spa destinations based on different job groups, office workers had a preference for Yuseong and Bugok, professional workers for Bomun, the people engaged in the farming, fishing, livestock raising and housewives for Haeundae and Dongrae, government officials, students, factory workers, the people living on a pension for Onyang, Deoksan and Dogo, and the self-employed for Suanbo. In conclusion, according to the analyses of spa destination preference based on different residence groups, residents of Seoul, Incheon, Gyunggi province, Gangwon province, Daejeon, Chungcheong province and Jeolla province had a preference for Yuseong, Suanbo, Onyang, Deoksan, and Asan and the residents of Daegu, Gyungsang province, Busan, Ulsan for Bugok, Bomun, and Haeundae.

• Korean Journal of Plant Resources
• /
• v.9 no.3
• /
• pp.279-284
• /
• 1996

Effects of varieties and cutting lengths of Chinense Martrimony Vine on the growth characteristics and the yield of green shoot were investigated in order to obtain the basic data The Yuseong-2 was observed higher in the number of green shoot per plant, of green shoot, but smaller in the length and the width of leaves than those of Cheongyang native. The number of green shoot was decreased in longer cutting length, but the other growth characteristics were increased. The dry weight of green shoot was $1.01{\sim}0.03g$ and the ratio of stem to leaf in green shoot was higher in leaf than that of stem, and the ratio was 46 : 54. The dry yield of green shoot was $108{\sim}204kg/10a$ in Cheongyang native and $215{\sim}363kg/10a$ Yuseong-2 and the dry yield of green shoot of Yuseong-2 may be expected in this planting year. Each growth characteristic of varieties was highly positive correlation with the yield except the number of green shoot of Cheongyang native. The number of green shoot of Yuseong-2 was nagative correlation with each growth characteristic and the yield except the number of total leaves per plant.

• Korean Architects
• /
• s.588
• /
• pp.124-125
• /
• 2018

• Korean Architects
• /
• s.641
• /
• pp.80-81
• /
• 2022

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.315-318
• /
• 1995

The optimum design problem of a coat-hanger die is solved by the inverse formulation. The flow in the die is analyzed using three-dimensional model. The new model for the manifold geometry is developed for the inverse formulation. The inverse problem for the optimum die geometry is formed as the optimization problem whose objective function is the linear combination of the square sum of pressure gradient deviation at die exit and the penalty function relating to the measure of non-smoothness of solution. From the several iterative solutions of the optimization problem, the optimum solution can be obtained automatically while producing the uniform flow rate distribution at die exit.