• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.634-644
• /
• 2021

This study aims to propose various ways to utilize CLO, which focuses mainly on the production of 3D virtual samples, by comparing it with the pattern drafting functions of Four apparel CAD experts, who have teaching experience in YUKA and CLO, participated in a focus group interview, and a basic bodice prototype drafting was carried out by each participant to evaluate the pattern drafting functions of YUKA and CLO. The result of this study showed that the pattern drafting tools of YUKA are subdivided since YUKA is a CAD tool inherently specialized in pattern making. Though CLO provided a relatively limited pattern drafting menu compared to YUKA, it was found that pattern drafting could be accomplished with the help of supplementary tools and functions. This finding suggests that each CAD offers the corresponding tools for the same use of menus or functions in the prototype drafting process. The major difference between YUKA and CLO is that YUKA defines the pattern area by a set of line segments, whereas CLO utilizes an outline composed of closed curves. YUKA provides various specific tools according to the options such as angles, straight lines, and curves, while CLO produces the same results using combinations of a limited number of tools. Compared with YUKA, the advantage of CLO is its user-friendly task environment such as the Windows-based user interface, from the usability perspective. This study concludes that pattern drafting education using CLO would help not only industrial 3D design practitioners but also pattern education in academia

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.65-77
• /
• 2024

This study aimed to propose effective ways to integrate CLO into educational settings by conducting a comparative analysis of pattern functions in YUKA and CLO, specifically focusing on skirt prototypes and variations. CLO, being a 3D virtual sample CAD tool, is mainly used in education to facilitate the creation of 3D virtual clothing. In order to explore the applicability of CLO's pattern functions in pattern education, CAD education experts were asked to produce two types of skirt prototypes and two skirt variations. Subsequently, in-depth interviews were conducted. In addition, the skirt pattern creation process was recorded on video and used for comparative analysis of YUKA and CLO pattern functions. The comparison revealed that CLO provides the pattern tools necessary for drafting skirt prototypes. The learning curve for acquiring the skills necessary for drafting and transforming skirt prototypes was found to be relatively shorter for CLO compared to YUKA. In addition, due to CLO's surface-based pattern drawing method, it is difficult to move or copy only specific parts of the outline, and there are some limitations in drawing right angle lines. In the pattern transformation process, CLO's preview function proved to be advantageous, and it was highly rated on user convenience due to the intuitive UI. Thus, CLO shows promise for pattern drafting education and is deemed to have high scalability as it is directly linked to 3D virtual clothing.

• Journal of the Korean Home Economics Association
• /
• v.35 no.5
• /
• pp.249-264
• /
• 1997

The purpose of this study was to provide the reference information for user and potential users of apparel CAD system is Korea. Two interviews were carried out for the study. The apparel CAD system of Assyst, Gerber and Yuka was selected for technical comparative study. The results were as follows: 1. The future development of the apparel CAD system is the transfer of the developed pattern design from a 3D design system and of CIM concept. 2. The share of data is working closely in a module function. So the Assyst system provide connectivity and communication between all apparel CAD system's module and other automation programs. This system is suitable for CIM production line. 3. The Gerber system is developed the Apparel CAD system which is given by the CAM system's technical ability. This system is given high insurance of ability to the service and data transportation with other systems from users in the Korea. 4. The Yuka system is developed pattern making by the Apparel CAD system. This system's different methods which is compared with other systems are the split grading and auto pattern making. So this system is suitable for users which want to product many items and a little amount garment by using the Apparel CAD system.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.690-703
• /
• 2018

The purpose of this study is to help user understand the basic principles and interfaces of each program, and to provide a base material for the development of more efficient apparel CAD systems to compensate for each program's shortcomings by comparing the function of three apparel CAD systems: Yuka CAD, Opti-tex, and Style CAD. For this purpose, the skirt waistband and sleeve armhole line creation process were selected based on these two criteria. 1) There is a big difference between principle and method between CAD systems. 2) When CAD system is used rather than paper drawing process, the process is shortened and convenience is high. In this study, pros and cons and supplement point of each CAD system are suggested by comparing the functions of the CAD system performing the selected drafting process by four criteria: icon, key, method, and characteristic point. As a result of the study, it was confirmed that the three CAD systems differ in the basic principle and interface environment. As a result of analyzing the skirt waistband method function, it was confirmed that the band line is formed directly on the outline of the skirt and the band dart recognition function is the most efficient function and as a result of the analyzing the sleeve armhole line method function, it was confirmed that the curve generation function using the shape of the actual curve measure and the length adjustment function through the automation of the dimension calculation is the most efficient function.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.249-264
• /
• 1996

The purpose of this study was to investigate automatic manipulating functions of dart of CAD system, and to classify the dart of women's front bodice. The results from this study: 1.3 CAD systems, were compared in automatic manipulating functions of dart. Gerber system & Investronica system were based on the pivot-method of dart manipulating, Yuka system was based on the slash-method. 2. It is classified and made a dart-design chart with using darts, which were as examples related to dart manipulating in text & reference of the pattern design. 3. In case of education of dart manipulation, the classified dart-design chart provides variations of a basic pattern through dart manipulation.

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.542-554
• /
• 2002

The purposes of this study were to investigate, analyze, and consider the feature and practical situation of Apparel CAD education and distribution situation of CAD system so that CAD education can be effectively operated and managed in various kinds of relevant schools and universities. 32 colleges and universities that are performing CAD educational system are selected for the study. The author of the study has investigated and obtained the information through questionnaires to 32 professors who are in charge of CAD lectures and 301 students who are receiving CAD education. The result is as follows. 1. It showed that 62.5% of CAD educational systems have been practically introduced after 1995. Regarding the using system, YUKA occupies 46.9%, PAD 21.8%, and GERBER 18.8% and these three kinds of system have been chiefly supplied. 40.6% of them own only one system, 37.5% of them own 2～5 systems and 78% of them own less than 5 systems. 2. The most seriously pointed problems during the operation of CAD system were the lack of experimental materials and the frustration of manpower supply. Thus, the CAD education programs in schools and universities are practiced in inferior environments internally and externally. 3. Regarding the practical situation of CAD education, 28 among 32 schools and universities are performing CAD as one of the regular subjects for the curriculum. 4. Regarding satisfaction degree of the using system, professors showed higher satisfaction degree than students did. In conclusion, it showed that although the practical situations of CAD education in schools and universities have been changed and improved so much since 1995 owing to the increase of the positive recognition of the necessity of CAD, many students in the educational sites cannot study their favorite subjects related with CAD program with interest due to the lack of experimental facilities, the poor computer management systems, and the problems of manpower supply, etc.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.241-248
• /
• 2022

This study aims to provide basic data to suggest guidelines for re-education and work improvement of modelists based on the analysis of the current status of modelist work and education. A survey was conducted from January 4 to May 15, 2020, targeting 44 people working in pattern, pattern CAD, and grading in domestic apparel companies. Descriptive statistical analysis and frequency analysis using SPSS 25 were employed to analyze the status of work type, work difficulties, and re-education. For pattern production, the rate of using pattern CAD for business was high. It was found that companies mainly use YUKA CAD (63.8%), and branded companies use pattern CAD (100%). It was found that 3D CAD is mostly employed by vendors (88.9%), and CLO (90%) is mainly used. Regarding difficulties in pattern making, it was found that they experienced difficulties with stretchable materials owing to the amount of shrinkage and sagging of the fabric. The work problem was the lack of requisite working hours owing to the volume of work. Regarding future re-education, 63.6% of the total respondents indicated that they required a course related to pattern correction and material. Moreover, it was found that re-education was necessary to upgrade technology and acquire new knowledge, however, information on re-education was insufficient.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.97-108
• /
• 2004

This study was conducted to examine the marking efficiency of a dress pattern in order to reduce textile loss by pattern marking. A basic one-piece dress pattern saved to the Yuka CAD System was graded with different sizes and arranged for industrial purpose to calculate the marking efficiency in different conditions. Condition of marking experiment is made it a rule to use 150cm textile width and apply 44, 55, 66 pattern size for three pieces of a dress patterns. The results of the study indicated that the marking efficiency rates of the dress pattern with a separate facing was higher than the one with a self facing. In the dress pattern with a separate facing, the separated seam at center back was appeared to have a higher marking efficiency than the extended seam. It was also found that the efficiency rate was higher in the pattern with a seam at center back when comparing with the dress pattern without a seam. When the marking with a horizontally-loaded collar was compared with a vertically-loaded collar, the efficiency rate was higher for the collar loaded horizontally, The result of the study showed that the type of facing, the location of a seam, and the direction of collar loading were the factors directly related to increasing marking efficiency. The dress patterns marked efficiently in terms of a type of facing, seam, and collar treatment can reduce fabric loss and also shorten the time needed for marking process.

• Korean Journal of Human Ecology
• /
• v.16 no.1
• /
• pp.137-143
• /
• 2007

The purpose of this study is to prove the work efficiency of PDS by measuring the work time on the process of pattern making of woman's tailored jacket. Also compared to the manual work time, PDS work efficiency is estimated according to experience difference. The YUKA CAD system was used. Through analysis of PDS Process, work time was measured by stop watch. Also the appearance of the 2 jackets was evaluated by a pool of evaluators consisted of graduate students and experienced professional modelist. The results were as follows: The work efficiency of PDS is higher than the work efficiency of manual work. There were significant differences of work time between work types in the expert and inexpert group. A study compared the work efficiency by PDS work type with those by manual work type according to experience difference and found that the work efficiency by PDS in the expert group was 25.3%, in the inexpert group was 35%. There were significant differences of work time between experience groups in PDS work, the work efficiency of expert group to inexpert group in the total pattern making time by PDS was 36.7%. There were no significant differences of appearance of tailored jacket between work types.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.