• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.469-487
• /
• 2007

Grain-Size Trend Analysis is the methodology to identify net sediment transport pathways, based on the assumption that the movement of sediment from the source to deposit leaves the identifiable spatial pattern of mean, sorting, and skewness of grain size. It can easily be implemented with low cost, so it has great potentials to contribute to geomorphological research, whereas it can also be used inadequately without recognition of its limitations. This research aims to compare three established methods of grain-size trend analysis to search for the adequate way of application, and also suggest the research tasks needed in improving this methodology 1D pathway method can corporate the field experience into analyzing the pathway, provide the useful information of depositional environments through X-distribution, and identify the long-term trend effectively. However, it has disadvantage of the dependence on subjective interpretation, and a relatively coarse temporal scale. Gao-Collins's 2D transport vector method has the objective procedure, has the capability to visualize the transport pattern in 2D format, and to identify the pattern at a finer temporal scale, whereas characteristic distance and semiquantitative filtering are controversial. Le Roux's alternative 2D transport vector method has two improvement of Gao-Collins's in that it expands the empirical rules, considers the gradient of each parameters as well as the order, and has the ability to identify the pattern at a finer temporal scale, while the basic concepts are arbitrary and complicated. The application of grain sire trend analysis requires the selection of adequate method and the design of proper sampling scheme, based on the field knowledge of researcher, the temporal scale of sediment transport pattern targeted, and information needed. Besides, the relationship between the depth of sample and representative temporal scale should be systematically investigated in improving this methodology.

• Korea Journal of Hospital Management
• /
• v.8 no.1
• /
• pp.112-134
• /
• 2003

The purpose of this study is to analyze the consumer's expectation before the health care service and the consumer's satisfaction after it. The participants of the study are inpatients in a general hospital located in Seoul. The resources were collected from the self-administration questionnaire survey run parallel with face to face interview. In order to measure the degree of the consumer's expectation, 349 samples were collected from the first questionnaire survey on the date of admission to the hospital. The second questionnaire survey was carried out on the date of discharge to the hospital with the participants responding to the first questionnaire survey. There are 154 samples collected from this survey. The results from the analysis of these resources are as follow. First, the survey shows that one of the highest consumers' expectations was about the generosity, kindliness and sincerity from the staff at the hospital, specially from doctors. Second, according to the analysis of the factors affecting the expectations of the consumers, with regard to path of admission to a hospital relating to patient's features, outpatient who gets into a hospital expected good medical care much more than the other patients. In regard of doctor's features, patients usually and highly expect good medical care from doctors who have good carrier and much experience. Third, according to the second questionnaire survey, what patients are satisfied most with is about the generosity and sincerity from staff at a hospital, especially from doctors and their gem attitudes. The results from survey show that the differences among the degree of consumers' satisfaction are very variable, depending on surrounding environments and facilities. The only fact that expectation didn't meet with satisfaction appeared to the case about technology and skill of medical care and the case about updated medical skills and equipments. Fourth, comparing the degree of expectation with the degree of satisfaction of consumers, correlative analysis was concerned significantly and specifically about the part of overall cleanliness relating to facilities and surrounding environments, the items about medical examination and test plan procedure relating to skill of medical care, professional specialties and convenience for procedure, and the items about satisfying explanations and concern about patients from doctors relating to staff's generosity and sincerity. Fifth, the analysis of the factors affecting the degree of how much patients are satisfied with shows that relating to sociodemographical features, patients are not satisfied with the case when the time and process of medical treatment are getting longer. It is surveyed that consumer were satisfied with the motivation to visit a hospital and the insurance type in patient's feature and so were the medical department and the factor of the degree of the expectation in disease's feature. Sixth, according to analysis based on the survey, patients would join again a hospital when they get satisfaction from the medical care and also they want to come again regarding to doctor's capability. For example, when doctors are old, have a good carrier and much experience, patients would come again. As seen from the above, consumers are usually satisfied with the medical treatment more than that they expected before. They would intend to use again when they get satisfaction from the medical care provided at a hospital. Patients and consumers highly expect good attitude as well as capacity from medical doctors and they are also generally satisfied with those things. Therefore, in order to increase the degree of consumer's satisfaction and their intention to come again, the hospital staff would have to commit themselves to achieve high quality service continuously and would have to make an effort to offer the finest quality service.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.487-493
• /
• 2008

Recently, in proportion to the remarkable development of dentistry and income increases it is growing more and more a concern about changed awareness in appearance. In this study, it had a grasp of the purpose for university hospital visiting, the motive of the commencement for orthodontic treatment and a method of the treatment as well as term. Based on these, the aim of this study is to keep more of the information between parent and doctors for mutual understanding and to grasp the characteristics for the needs of orthodontic treatment. In order to conduct researches, there has made a survey of 150 persons among orthodontic patients' parents who visit CBNU hospital, the pediatric dentistry. The study has found the results like these. 1. There was a question about the reason to visit CBNU hospital in the department of pediatric dentistry for orthodontic treatment. 52.1% of respondents, the survey found, were more likely to receive a good medical service. 25% of them were counselled from a relative or an acquaintance. 16.7% of them were recommended by another dental clinic. 2. There was a question about the expected orthodontic treatment period, when at first hospital visiting. 37.5% of the respondents answered that it was a 'more than 2 years', 12.5% of them said 'from 12 months to 18 months'. 3. There was a question about the reason to receive orthodontic treatment. 58.3% of the respondents, the survey found, answered the reason was parents' concern about the malocclusion of their children, 12.5% of them said a the orthodontic problem pointed out by entourages. 4. There was a question about the method of orthodontic treatment for patients who visit the department in pediatric dentistry. 41.7% of the respondents said that it was used as 'an intra-oral fixed appliance', 29.2% of them said 'an intra-oral removable appliance', 2.1% of them said 'an extra-oral appliance', 5. There was a question about the waiting time for treatment after a dental appointment. 60.4% of the respondents said 'from 5 minutes to 10 minutes', 4.1% of them said 'from 15 minutes to 30 minutes'. There was a question about the extent of an acceptable waiting time. It was answered to 'from 5 minutes to 10 minutes' by 60.4% of them, 2.1% of them said 'from 15 minutes to 30 minutes'.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.314-321
• /
• 2007

This study was conducted to select leaf vegetables suitable for cultivation in apartment verandas and simple and easy fertigation method for home gardening. In order to develop the convenient fertigation method, hydroponics, wick irrigation, and overhead irrigation methods were compared. For the wick irrigation, two types of nutrient sources were used; one was slow release fertilizers mixed with medium and the other one was nutrient solution filled in container located under pots. The growth of leafy lettuce, leaf mustard, and leaf beet was better in both of the wick irrigation methods rather than in overhead irrigation and hydroponics. The wick irrigation method is very easy, so that it is expected to bring a good result from the cultivating and managing point of view, if it brings with commercialized system along with slow release fertilizer. As a result of investigation of environment such as temperature, relative humidity, and irradiance level in apartment verandas in autumn the highest irradiance level during a day was just 48% and 35% in verandas facing south and feeing southeast, respectively, comparing to that in greenhouse. The light environment was investigated as a limiting factor for vegetable growing in verandas. Therefore, to select the vegetables showing good growth under low irradiance environment, nine leaf vegetables such as romaine lettuce, lent lettuce, head lettuce, endive, pak-choi, leaf mustard, garland chrysanthemum, leaf beet, and Chinese chive were grown under 0%, 50%, 70%, 90% shading. Among them, Chinese chive showed the best growth under low irradiance levels. Endive showed line growth reduction according to shading degree, however, even under 90% shading condition, it showed good growth. And then leafy lettuce, garland chrysanthemum, and pak-choi followed. Therefore, these results will be of help in selecting vegetables for veranda gardening with different light levels.

• Parasites, Hosts and Diseases
• /
• v.32 no.2
• /
• pp.65-74
• /
• 1994

Surface ultrastructure of Pawctrema timonnauini developmental stages was studied using a scanning electron microscope. The metacercariae were collected from the marine clam, Topes phiLippinam and juvenile and adult worms were recovered at 1, 2, 3 and 7 days after experimental infection of mice. The metacercariae had a large oral sucker and characteristic lateral projections. Around the lip of the oral sucker many type I and type II sensory papillae were observed, and type III papillae were located symmetrically on the medial side of the lateral projection. Numerous type I papillae were grouped around the genital pore. The tegumental spines were distributed over the worm surface except the lip of the suckers and genital pore. The 1-day old worm had a well-developed ventral sucker, with 6 type II sensory papillae on its outer surface and another 6 type I papillae on the inner side. Two small type I papillae were seen on the anterior side of the ventral sucker. The genital pore was small and opened separately from the ventral sucker and 15 type I papillae were grouped around it. The 2-, 3-. and 7-day worms revealed that as they grew to be adults, the spine tips became multipointed, the genital pore formed a genital atrium, and the cytoplasmic process became well differentiated. In 2- and 3-day worms 10 type II papillae encircling the lip of the oral sucker, and additional 4 papillae at the dorsal side of 4 dorsal type II papillae were a characteristic feature. The distribution pattern of sensory papillae around the oral sucker and genital pore, and 2 type I papillae on the anterior side of the ventral sucker, was so peculiar in R timonnnuini, that they seem to be useful keys for taxonomic differentiation from other gymnophallids.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.53-58
• /
• 2013

Purpose: To optimize correction method for SPECT/CT, image quality consisting of resolution and contrast was evaluated using three radioisotopes ($^{99m}Tc$, $^{201}Tl$ and $^{131}I$) and three different correction methods; attenuation correction (AC), scatter correction (SC) and both attenuation and scatter correction (ACSC). Materials and Methods: Images were acquired with a SPECT/CT scanner and a conventional CT protocol with an OESM reconstruction algorithm (2 iterations and 10 subsets). For resolution measurement, fixed radioactivity (2.22 kBq) was infused into a spatial resolution phantom and full width at half maximum (FWHM) was measured using a vendor-provided software. For contrast evaluation, radioactive source with a ratio of 1:8 to background was filled in a Flanged Jaszczak phantom and percent contrast (%) were calculated. All the parameters for image quality were compared with non-correction (NC) method. Results: As compared with NC, image resolution of all three isotopes were significantly improved by AC and ACSC, not by SC. In particular, ACSC showed better resolution than AC alone for $^{99m}Tc$ and $^{201}Tl$. Image contrast of all three radioisotopes in a sphere with the largest diameter were enhanced by all correction methods. ACSC showed the highest contrast in all three radioisotopes, which was the most accurate in $^{99m}Tc$ (85.9%). Conclusion: Image quality of SPECT/CT was improved in all the radioisotopes by CT-based attenuation correction methods, except SC alone. SC failed to improve resolution in any radioisotopes, but it was effective in contrast enhancement. ACSC would be the best correction method as it improved resolution in radioisotopes with low energy levels and contrast in radioisotope with low energy levels. However, in radioisotope with high energy level, AC would be better than ACSC for resolution improvement.

• Journal of agricultural medicine and community health
• /
• v.39 no.1
• /
• pp.1-13
• /
• 2014

Objective: The objectives were to estimate the rate of the injury in the elderly over the past year and to identify factors related to injury in the elderly in South Korea. Method: Using data from the 2008 Community Health Survey, 43,049 elderly persons, aged 65 years and older, were selected as study subjects. Their experience of injury during the past year and other variables, including socio-demographic factors, health-related factors, and diagnosed chronic diseases, were used. The chi-squared test and multiple logistic regression analysis with weighted analysis were conducted and statistical significance was set at p<0.05. Result: The rate of injury in the elderly during the past year was 5.1%. The most common types of the injury were falling/slipping down and traffic accidents. Factors related to injury in the elderly were living alone, current drinking, depression, poor self-rated health, stroke, and osteoporosis. Living alone (odds ratio 1.23, 95% CI: 1.05-1.45), current drinkers (OR 1.19, 95% CI: 1.05-1.35), poor self-rated health (OR 1.72, 95% CI: 1.43-2.08), depression (OR 1.23, 95% CI: 1.17-1.68), and history of stroke (OR 1.40, 95% CI: 1.17-1.68), and history of osteoporosis (OR 1.45, 95% CI: 1.26-1.66) were related to an increased risk of injury. Conclusions: Intervention programs that consider the risk factors related to injury should be developed and implemented to decrease and prevent injuries in the elderly.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.14 no.2
• /
• pp.183-196
• /
• 2003

Objectives：The Purpose of this study is to investigate the reliability and validity of Korean Parent and Teacher Conners' Rating Scale. Methods：Randomly selected 1st to 6th graders of the two elementary schools(N=1044) in Anyang City participated in the study. Children diagnosed with ADHD(N=23) at the child and adolescent clinic at a university affiliated hospital were included in the study for the analysis of clinical validity of the scales. Parent and teacher completed Korean Conners' Rating Scale and Korean-ADHD Rating Scale(KARS). In addition, parents completed Korean-Children Behavior CheckList(K-CBCL). Descriptive statistics, t-test, and analysis of variance were performed. Results：Scores of Korean Conners' Parents Rating Scale were significantly correlated with those of Korean Conners Teacher Rating Scale. High internal consistency reliability were demonstrated in both parent and teacher rating scales. There were significant correlations among sub-scales of Conners' Rating Scales, K-CBCL and K-ARS. Factor analyses revealed that the K-CTRS had three-factor structure (Inattention-Passivity, Hyperactivity, Conduct Problem) and the K-CPRS had five-factor structure(Impulsive-Hyperactive, Conduct Problem I, Anxiety, Psychosomatic, Conduct Problem II). Conners' Rating Scales effectively distinguish children with ADHD from children without ADHD. Conclusion：Korean Parent and Teacher Conners' Rating Scales are valid and reliable instruments that are useful for screening and identifying childhood problem behaviors. Future studies are required with a larger number of sample sizes including adolescents from various geographic regions.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.88-94
• /
• 2014

In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.