• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.969-974
• /
• 1994

After adding 8Y-ZrO2 powders to 3Y-ZrO2 powders at ratios of 0, 33, 50, 67, and 100% by weight, the mixed yttria-stabilized zirconia specimens were fabricated into thin plate using tape~casting method and then sintered at 150$0^{\circ}C$ for 4h in air. The crystalline structure, microstructure and electrical properties of the sintered zirconia thin plates were investigated by using X-ray diffractometer, scanning electron microscope and impedance analyser, respectively. At the temperatures higher than 75$0^{\circ}C$, the sintered thin plate with 33% 8Y-ZrO2 content shows higher mechanical properties and lower electrical resistivity than 8Y-ZrO2 thin plate which is generally used as an electrolyte for solid oxide fuel cells. This is due to the fact that the zirconia thin plates with low 8Y-ZrO2 content maintain the slope of low temperature region up to high temperatures, whereas at temperatures higher than 50$0^{\circ}C$ the slope decrease in the zirconia thin plates with high 8Y-ZrO2 content.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.77-82
• /
• 2015

To increase the performance of solid oxide fuel cell operating at intermediate temperature ($600^{\circ}C{\sim}800^{\circ}C$), $Sm_{0.2}Ce_{0.8}O_2$ (SDC) thin layer was applied to the $La_{0.8}Sr_{0.2}Mn_{0.8}Cu_{0.2}O_3$ (LSMCu) cathode by sol-gel coating method. The SDC was employed as a diffusion barrier layer on the yttria-stabilized zirconia(YSZ) to prevent the interlayer by-product formation of $SrZrO_3$ or $La_2Zr_2O_7$. The by-products were hardly formed at the electrolyte-cathode interlayer resulting to reduce the cathode polarization resistance. Moreover, SDC thin film was coated on the cathode pore wall surface to extend the triple phase boundary (TPB) area.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.283-289
• /
• 2001

Composite cathodes of 50/50 vol% LSM- YSZ (La$_{1-x}$Sr$_{x}$MnO$_3$-yttria stabilized zirconia) were deposited onto surface- Polished YSZ electrolytes by colloidal deposition technique. The cathode characteristics were then examined by scanning electron microscopy (SEM) and X-ray diffraction (XRD) and studied by ac impedance spectroscopy (IS). The typical impedance spectra measured for an air/LSM- YSZ/YSZ/Pt/air cell at $700^{\circ}C$ were composed of two depressed arcs. Addition of YSZ to the LSM electrode significantly enlarged the triple-phase boundaries (TPB) length inside the electrode, which led to a pronounced decrease in cathodic resistivity of LSM-YSZ composite electrodes. Polishing the electrolyte surface to eliminate the influences of surface impurities and to enlarge the TPB length can further reduce cathode resistivity. The cathodic resistivity of the LSM- YSZ electrodes was a strong function of operation temperature, composition and particle size of cathode materials, applied current, and electrolyte surface roughness.

• Journal of the Korean Ceramic Society
• /
• v.44 no.8
• /
• pp.419-423
• /
• 2007

The behavior of oxygen gas participating in fining was observed in CRT (Cathode Ray Tube) glass melts doped with $Sb_2O_5\;or\;CeO_2$ by means of a yttria-stabilized zirconia (YSZ) electrode. The temperature dependence of the oxygen equilibrium pressure ($P_{o2}$) or the activity in both melts showed typical behavior corresponding to a theoretical redox reaction. In other words, the $P_{o2}$ value of melts with $CeO_2$ was lower than that of melts with $Sb_2O_5$ above $1250^{\circ}C$. The result implies that $Sb_2O_5$, is more efficient as a fining agent compared to $CeO_2$. On the other hand, melts from a batch containing $Sb_2O_5\;and\;KNO_3$ showed much higher $P_{o2}$ values compared to melts without $KNO_3$ above $1350^{\circ}C$. It is suggested that the addition of $KNO_3$ to CRT glass batch contributes partly to the first fining of the melts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.1
• /
• pp.35-40
• /
• 2007

Cobalt ($Co^{2+}$) doped yttria stabilized cubic zirconia (YSZ, $Y_2O_3\;:\;25{\sim}50wt%$) single crystals grown by a skull melting method were heat-treated in $N_2\;at\;1000^{\circ}C$ for 5 hrs. The reddish brown single crystals were changed into either violet or blue color, respectively. Before and after heat treatment, the Co-doped YSZ crystals cut for wafers (${\phi}6.5{\times}t\;2mm$) and round brilliant (${\phi}10mm$). The optical and structural properties were examined by UV-VIS spectrophotometer and XRD. These results are analyzed absorption by $Co^{2+}\;(^4A_2(^4F)\to{^4P})\;and\;Co^{3+}$, change of energy gap and lattice parameter.

• Journal of the Korean Vacuum Society
• /
• v.5 no.2
• /
• pp.119-126
• /
• 1996

The effect of the $O_2$ concentration in the sputtering gas mixture, substate temperature and Ar pressure on the structural and optical properties of 3 mol% YSZ and 8 mol% YSZ thin films deposited by RF magnetron sputtering were investigated . The films were observed to have various crystal structures with different compositions in accordance with the type of the target materials. The size of fine grain-like particles decreased wiht increasing the $O_2$ concentration in the sputtering gas in the case of 3mol% YSZ, while it increased in the case of 8 mol% YSZ . However, the average opticla transmission of 8mol% YSZ, despite of thicker thickness. was higher than that of 3 mol% YSZ. Furthermore, the values of refractive index of 3mol% YSZ increased with increasing the $O_2$ concentration in the sputtering gas on the contrary to those of the 8 mol% YSZ. However, the transmission spectra of 8 mol% YSZ films were not strongly influenced by the substrate temperature and Ar pressure, whereas the refractive index of the YSZ films were strongly affected by the sputtering parameters.

• Journal of the Korean Ceramic Society
• /
• v.43 no.8 s.291
• /
• pp.498-503
• /
• 2006

A gas turbine blade with thermal barrier ceramic coating is operated at high temperature to increase engine efficiency. Recently, thermal barrier characteristics have been improved by advanced coating technology through microstructure control and increase of adhesion force of the coating layer. More advanced coating materials, rare earth zircon ate ceramics have been studied for replacing YSZ coatings as thermal barrier coatings. In this study, $La_2O_3,\;HfO_2,\;CeO_2,\;Gd_2O_3$ and pure or yttria stabilized zirconia were prepared. Microstructure analysis and the evaluation of mechanical properties such as Hertzian indentation and hardness test were performed.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.161-167
• /
• 1988

Yttria-Stabilized Cubic Zirconia Crystals with Various Y2O3 amounts (6-15mol%) were grown by the Skull melting technique. The modeling of the nucleation at the Skull bottom and the best growth condition were studied. The abrupt changes in generator heating Power and lowering rate of crucible caused the dendritic growth in the grown crystal. The optimum condition of cubic Zirconia single crystals was obtained when the lowering rate was gradually increased. The effect of Y2O3 amounts on the perfection adn the color of the grown crystal were determined. The darkish color generated in the crystals added Y2O3 amounts over 12mol% was eliminated by the annealing in air at 1200$^{\circ}C$ for 24hrs.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.391-402
• /
• 1999

Characteristics of composite electrolytes which were prepared by coating a thin film of YSZ (yttria sta-bilized zirconia : (ZrO2)0.92 (Y2O3)0.08) on YDC (yttria doped ceria : Ce0.8Y0.2O1.9) with mixed conductivity have been investigated in order to develop the low-temperature solid oxide fuel cell. The thickness (t) of spin-coated YSZ thin films after the heat-treatment at 600$^{\circ}C$ was increased proportionally to the sol con-centrations (C) while the decrease in its thickness with the spin rate ($\omega$) could be expressed in the e-quation of ln t=9.49-0.53 ln $\omega$(0.99mol//s sol conc.) When the sol concentration and the spin rate being less than 0.99 mol/l and higher than 1000 rpm respectively reliable YSZ/YDC composite electrolytes could be obtained by multi-coating although several micro-cracks were observed in singly coated YSZ film surfaces. The dense YSZ film with a 1$\mu\textrm{m}$ thickness was prepared by coating of 0.99 mol/l YSZ sol five-times at 2000 rpm followed by heat-treatment at 1400$^{\circ}C$ for 2h, The adhesion between YSZ film and YDC substrate was found to be very good. The open circuit voltages of H2/O2 single cell with YSZ/YDC composite electrolytes were 0.79∼0.82 V at 800$^{\circ}C$ and 0.75∼0.77V at 900$^{\circ}C$ The open circuit voltage was inversely proportioned to the thickness ratio of YSZ thin film (1$\mu\textrm{m}$) to YDC substrate(0.28-2.22 mm)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1245-1251
• /
• 2009

This paper describes the research on the non-eroding throat insert materials under condition of high-temperature, high-pressure, and long-burn time. C/SiC, CIT and W/$Y_2O_3$ were chosen and tested in thermal protection evaluation motor of burning time 20 seconds. From the test results, a heat resistance of W/$Y_2O_3$ was the most excellent among them, but was happened crack on material surface. Thermal reaction characteristics and heat resistance of these materials and feasibility of W/$Y_2O_3$ as throat material were ascertained.