• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.121-129
• /
• 2008

본 논문에서는 페라이트자석을 사용하고 있는 BLDC 전동기를 희토류 자석을 사용하는 전동기로의 설계를 다루고 있다. 최근 전기기기가 소형 경량화 됨에 따라 자석 성능이 우수한 희토류 자석을 이용한 전동기가 많이 사용되고 있다. 그러나 전기제품 메이커들은 기존의 설계를 유지하려는 경향이 있다. 본 연구에서는 전기기기에 취부되는 전동기의 외형을 그대로 하고 내부의 설계만 희토류 자석으로 변경하는 설계를 한다. 설계를 간단히 하기 위해 유한 요소법의 상용 패키지를 반복적으로 사용하였고 코깅 토오크를 줄이기 위해 고정자 요크와 고정자 단의 그루브를 설계하였다.

• 조명전기설비학회논문지
• /
• 제28권2호
• /
• pp.48-53
• /
• 2014

The shield effect of 4 layered shield case was investigated in this paper. The material of the case was non-oriented SiFe sheet with a thickness of 0.5mm. The size of the case was 100mm wide, 100mm high and 300mm long. Relative permeability of SiFe sheet was needed to calculate shield effect. It was obtained from the measurement by a ferrite yoke and from the calculation by eddy current FEM analysis. Three configurations were used to connect both ends of SiFe sheet. First one is a connection by double-welded butt. Second one is to put the sheet the same material above the confronted both ends of the sheet to avoid a leakage magnetic flux. The last one is ideally without any connection. The shield effect of the second one agreed well with the last one and showed the shield effect of -40dB.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.35-43
• /
• 1997

Concurrent Engineering is one of the methods which are used for the rapid product development. One of the important features in Concurrent Egineering is that the development process is to be parallel and the organization should be cross-functional. In order that the process be parallel and that the organization be cross-functional, an integrated information system such as PDM (Product Data Management) is required. Although the integrated data base is constructed, it could be meaningless if the application softwares were not inter-operable. This study shows an example of intergrated information system from three-dimensional product design to mold design and tooling for the development of Deflection Yoke(DY) which is one of the important parts of Cathode Ray Tube(CRT). A three-dimensional product design software, which is based on a commercial code, has been developed by ourselves. Selective Laser Sintering(SLS), which is one of the rapid prototyping techniques, has been used in this study. Mold design has been done by the three-dimensional way. A newly developed method of mold tooling, which is called Quick Die Manufacturing(QDM), has been introduced.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1049-1060
• /
• 2011

The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.59-63
• /
• 2019

To reduce the fault current below the current capacity of a circuit breaker, researches on HTS (High Temperature Superconductor) power cables with fault current limiting (FCL) function are increasing. An FCL HTS power cable transports current with low a impedance during normal operation. Yet, it limits the fault current by an increased inductive or resistive impedance of conducting layer when quench occurs at the FCL HTS power cable by the large fault current. An inductive type FCL HTS power cable uses increased inductive impendence caused by leakage magnetic flux outside the cable core when the quench occurs at a shield layer losing the magnetic shielding effect. Therefore, it has an advantage of less resistive heating than resistive type FCL HTS power cable and temperature increase is suppressed. This paper describes an ideal circuit model for the FCL HTS power cable to investigate the effectiveness of increased inductive impedance when quench occurs at the shield layer. Then, FEM analysis is presented with a simplified model cable composed of various iron yokes to investigate the effect of the shape of yoke on the generation of the inductive impedance.

• 한국자기학회지
• /
• 제10권4호
• /
• pp.178-182
• /
• 2000

본연구에서는 서로 직교하는 yoke 장치와 4-채널 과도기록장치를 사용하여 회전하는 자기장을 발생시키고, 회전자화에 의한 자기적 손실을 측정할 수 있는 측정시스템을 구성하였다. 개발된 측정장치를 사용하여 무방향규소강의 회전자화에 의한 자기적특성을 측정하였으며, 회전자화에 의한 손실의 측정에서 자기유도성분의 측정방향과 자화력성분의 측정방향이 일치하지 않아, 시계방향 및 반시계방향으로 측정한 값이 차이를 나타내었다. 그러나 시계방향 및 반시계방향으로 측정한 회전자화에 의한 손실값의 평균은 일정함을 알 수 있었으며, 이를 이용할 경우 회전자화의 폭정오차를 줄일 수 있었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.115-121
• /
• 2014

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a Switched Reluctance Motor(SRM) make it possible to use in many commercial adjustable speed application. The simple magnetic circuit results in a high efficiency drive and low temperature rise, and the drive system provides a good drive characteristics. This paper is provides two phase 4/3 SRM that is similar to two phase 6/3 SRM as aspect to magnetic structure. Although 6/3 SRM does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited, but two phase 4/3 SRM experiences a flux reversal in small part of stator yoke. The flux reversal in two phase 4/3 SRM could be relieved by an adjustment of stator yoke structure. The magnetic analysis and design considerations of the two phase 4/3 SRM have been obtained by the finite element method analysis (FEM).

• 한국정밀공학회지
• /
• 제17권1호
• /
• pp.204-208
• /
• 2000

An approximate similarity theory has been applied to predict the forming load of non-axisymmetric forging of aluminum alloys through model material tests. The approximate similarity theory is applicable when strain rate sensitivity, geometrical size, and die velocity of model materials are different from those of real materials. Actually, the forming load of yoke, which is an automobile part made of aluminum alloys(Al-6061), is predicted by using this approximate similarity theory. Firstly, upset forging tests are have been carried out to determine the flow curves of three model materials and aluminum alloy(Al-6061), and a suitable model material is selected for model material test of Al-6061. And then hot forging tests of aluminum yokes have been performed to verify the forming load predicted from the model material, which has been selected from above upset forging tests. The forming loads of aluminum yoke forging predicted by this approximate similarity theory are in good agreement with the experimental results of Al-6061 and the results of finite element analysis using DEFORM-3D.

• 항공우주시스템공학회지
• /
• 제16권5호
• /
• pp.1-7
• /
• 2022

최근 인공위성 임무 고도화에 따라 고성능의 전장품이 탑재되어 시스템 소요전력이 증가되고 있다. 이에 따라 충분한 전력확보를 위하여 태양전지판 크기 또한 점차 증가하고 있다. 태양전지판의 크기 증가 및 중량화는 위성체 자세 기동 시 발생하는 진동과의 커플링 등에 의해 태양전지판 탄성 진동의 크기 증가를 유발한다. 상기 진동은 힌지 및 요크를 통해 위성체에 전달되어 지향성능이 요구되는 고정밀 관측위성의 지향성능과 직결되어 고해상도 영상 획득 임무 성능을 저하시킨다. 종래에는 태양전지판의 탄성 진동을 저감시키고자 고강도 설계에 집중 또는 별도의 보강재 및 댐퍼 시스템을 적용하였다. 그러나, 이는 부피 및 무게를 증가시키며 시스템 복잡성이 증가하는 한계점이 존재한다. 본 연구에서는 상기 한계점을 극복하고자 초탄성 형상기억합금(SMA: Shape Memory Alloy) 양면에 점탄성 테이프로 박막층을 적층함으로써 댐핑 특성을 극대화하였으며, 별도 시스템 적용없이 작은 부피 및 무게로 진동을 저감하여 시스템 경량화에 기여할 수 있는 설계기법을 제안하였다. 제안한 초탄성 SMA 적층형 태양전지판 요크를 태양전지판 더미에 적용시켜 자유감쇠시험 및 온도시험을 통해 설계 유효성을 입증하였다.