• 한국식품영양과학회지
• /
• 제30권3호
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Journal of the Korean Data and Information Science Society
• /
• 제18권3호
• /
• pp.773-782
• /
• 2007

The statistical process control charts are very extensively used for monitoring of process mean, deviation, defect rate or reject rate. In this paper we consider a control chart to monitor the process reject rate in the high yield process, which is based on the observed cumulative probability of the number of items inspected until r defective items are observed. We first propose selection of the optimal value of r in the CPC-r charts, and also consider the usefulness of the chart in high yield process such as semiconductor or TFT-LCD manufacturing process.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권2호
• /
• pp.183-192
• /
• 2004

The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.

• 한국세라믹학회지
• /
• 제44권8호
• /
• pp.430-436
• /
• 2007

Rheological properties of cement paste containing ultrafine blastfurnace slag (UBS, $9600cm^2/g$) were investigated by mini-slump test, pH meter, conduction calorimeter and coaxial cylinder viscometer. In order to improve rheological properties of the cement paste, granulated blastfurnace slag (GBS, $3500cm^2/g$) and polycarboxylate type superplasticizer (PC) were also used in this experiment. The fluidity of cement paste containing UBS was decreased. The yield stress and plastic viscosity of cement paste was increased with increasing UBS. But the rheological properties were improved when GBS and PC were added to UBS blended cement paste. In the relationship between the yield stress and the plastic viscosity or the mini-slump value, the yield stress of the cement paste was proportional to the plastic viscosity of it. However the cement paste mini-slump value was in inverse proportional to the yield stress.

• 한국초지조사료학회지
• /
• 제37권2호
• /
• pp.108-115
• /
• 2017

The aim of this study was to evaluate different herbicides in corn-soybean intercropping for optimum growth, yield and nutritive value of forage under Korean environment conditions. Herbicidal treatments were randomly applied over five plots, viz. (1) Control treatment: no herbicide; (2) Alachlor; (3) Simazine; (4) Pendimethalin and (5) Mixture of alachlor and simazine herbicides in RCBD have three replications. Results depicted that treated herbicides exhibited significant effect over control of weeds. Simazine herbicide alone or mixed with alachlor had adverse effects on soybean but enhanced (p<0.05) corn production in terms of survivability, dry matter and digestible nutrients yield. Corn-soybean coupling and total dry matter yield were greater (p<0.05) in pendimethalin. Simazine-alachlor mixture reduced (p<0.05) soybean height. Conclusively, simazine could not be suitable for corn soybean intercropping because of having an adverse effect on soybean component. Pendimethalin could maintain growth and yield of corn and soybean both components. Effect of alachlor was comparable to that of pendimethalin.

• 한국농림기상학회지
• /
• 제16권4호
• /
• pp.316-326
• /
• 2014

출수한계기의 설정을 통해 이앙한계기 및 파종한계기 추정이 가능하며, 이는 이모작 가능 지대를 파악할 수 있게 하여 기후변화에 따른 작부체계 설정에 도움을 줄 수 있다. 본 연구에서는 과거평년인 1971년부터 2000년까지의 기상자료와 현재평년인 1981년부터 2010년까지의 기상자료를 이용하여 51개의 관측지점에서의 출수한계기를 설정하였으며 최대 잠재적 수량 개념인 기후등숙량을 이용하여 생산성을 검정하였다. 출수 후 40일 동안 평균기온의 누적온도를 이용하여 계산되는 출수한계기를 설정하기 위해 $760^{\circ}C$, $800^{\circ}C$, $840^{\circ}C$ 및 $880^{\circ}C$를 기준온도로 사용하였다. 또한, 기후등숙량은 출수 후 40일 간의 평균온도 및 일조시간을 이용하였다. 출수한계기에서 출수를 하였을 경우 일반적인 벼 재배시기에 비해 수량이 얼마나 감소하는지를 분석하기 위해 출수한계기에서의 기후등숙량을 기후등숙량의 최대값으로 나눠 그 비율값인 $CYP/CYP_{max}$을 구하였다. 출수한계기 분석 결과 과거평년에 비해 현재평년에서 출수한계기가 앞당겨지거나 변화가 없는 관측지점도 있었으나 대부분의 지점에서 출수한 계기가 늦추어졌으며 기준온도별로 그 변화가 상이하였다. $CYP/CYP_{max}$값은 모든 조건에서 81.8%이상의 값을 보였으며 대부분의 조건에서 90%이상의 값을 보였다. 따라서, 출수한계기까지 출수를 늦추더라도 기후적인 측면에서는 수량에 대한 손실이 크지 않을 것으로 사료된다. 출수한계기가 늦추어진 경우, 이는 이앙한계기 역시 늦추어질 것을 나타내며, 결국, 기후변화 조건에서 이모작 가능 지역이 증가할 가능성이 높을 것으로 사료되었다. 본 연구는 출수 후 40일간의 평균온도와 일조만을 대상으로 분석하여, 급작스러운 기온저하나 개화기 고온장해 등과 같은 기상장해 등은 고려하지 않았다. 따라서, 등숙기 기간동안의 특이적인 기상조건을 고려하고 보다 생물리학적인 수량예측을 위해 작물 모델을 사용한 연구가 추후에 수행되어야 할 것으로 사료된다. 또한, 이러한 방법을 사용하여 우리나라뿐만 아니라 동아시아 지역에서 미래기후조건에서의 재배한계기에 대한 분석를 통해 지역적인 기후변화적응 대책에 대한 연구가 필요할 것이다.

• 한국강구조학회 논문집
• /
• 제16권3호통권70호
• /
• pp.315-324
• /
• 2004

본 논문은 지관에 압축력을 받는 냉간성형 각형강관 T형 용접접합부의항복선 해석에 관한 연구이다. 기존 연구 중 냉간성형 정방형 각형강관 T형 용접 접합부만을 포함하는 실험결과와 Kato, Packer, Zhao, CIDECT 및 본 연구진들의 제안식을 비교하였다. 제안된 항복선 모델의 적용한계치를 제안하기 위하여, 항복선 해석에 기초하여 이전 논문에서 제안된 항복선모델을 재검토하였다. 제안된 항복선 모델은 냉간성형 각형강관 곡률부와 용접크기를 고려한다. 마지막으로, 실험상의 실체 파괴모드와 해석상의 비교결과를 참조하여, 항복선 해석의 적용범위를 ${\beta}^{\prime}{\leq}0.8$로 제안하였다. 여기서, ${\beta}^{\prime}=0.8$, ${\beta}^{\prime}=b_1^{\prime}/b_0^{\prime}$, $b_1{^{\prime}}=b_1+t_0$, $b_0{^{\prime}}=b_0-t_0$.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권8호
• /
• pp.69-76
• /
• 2020

The study examines lagged economic effects of research and development (R&D) investment on the market value of manufacturing firms listed on the Shanghai Stock Exchange or the Shenzhen Stock Exchange in China. This study applies panel data analysis methods to address the following issues: 1) There might be an adjustment lag in the impact of R&D investment on corporate market value, and 2) Unobserved firm effects must be taken into account. The balanced panel data includes a total of 1,462 observations with 34 cross-sections of manufacturing firms listed on Chinese stock markets and with 27 time-specific quarterly periods from 2007 to 2017. The results indicate that the R&D investment of Chinese manufacturing firms tends to yield favorable market value of the firm with some adjustments to time. The results show that R&D investment exhibits a strong positive impact on their market value of manufacturing firms in Chinese stock markets. Moreover, R&D investment has a positive time-lag effect on the market value of the firm. Interestingly, the R&D investment of Chinese manufacturing firms generate a relatively constant positive effect on their market value, supporting the notion that the corresponding returns of R&D investment for such firms yield lagged but added market values.

• Journal of Animal Science and Technology
• /
• 제60권2호
• /
• pp.1.1-1.6
• /
• 2018

Background: Maize fodder is being used as staple feed for livestock but it lacks protein and essential amino acids; lysine and tryptophan. Intercropping maize with leguminous soybean crop is promising technique under limited land resources of South Korea but it can only give considerable advantages when adequate distance is provided between corn and soybean rows. Main aim of present study was to find-out adequate distance between corn and soybean seeding rows for optimum growth, yield and nutritive value of intercropped forage. Methods: Different interrow distances between corn and soybean were evaluated under four treatments, viz. 1) Corn sole as positive control treatment 2) Zero cm between corn and soybean (control); 2) Five cm between corn and soybean; 3) 10 cm between corn and soybean, with three replicates under randomized block design. Results: Findings depicted that height and number of corn stalks and ears were similar (P > 0.05) among different treatments. Numerically average corn ear height was decreased at zero cm distance. Dry matter percentage in all components; corn stalk, corn ear and soybean was also found not different (P > 0.05) but dry matter yield in component of corn ear was lower (P < 0.05) at zero cm distance as compared to that of 5 and 10 cm interrow distances. In case of nutritive value, total digestible nutrient yield in intercropped corn was also found lower (P < 0.05) at zero cm distance than that of 5 and 10 cm interrow distances between corn and soybean seeding rows. Substantial decrease in dry matter yield of maize ear at zero cm distance might be attributed to factor of closed interrow spacing which made interplant competition more intensified for light interception, necessary for photosynthetic activity. Lower dry matter yield in ear also reduced total digestible nutrients in intercropped maize because it was determining factor in calculation of digestible nutrients. The optimum yield and nutritive value of forage at wider interrow distance i.e. 5 cm between corn and soybean might be due to adequate interseed distance. Conclusion: Conclusively, pattern of corn and soybean seeding in rows at 5 cm distance was found suitable which provided adequate interrow distance to maintain enough mutual cooperation and decreased competition between both species for optimum production performance and nutritive value of intercropped forage.