• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.265-272
• /
• 2000

Unbond brace hysteretic dampers are generally used to prevent or decrease structural damage in buildings subjected to strong earthquake by its energy dissipating hysteretic behavior. According to a previous research, the optimum ratio of device yield strength to story yield strength of the combined system has been identified as the most important parameter for characterizing the performance of this device. In this research, the validity and the applicability of the previous research has been investigated and a new approach has been proposed through earthquake response analysis of a steel structure installed with unbond brace type hysteretic damper.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.1
• /
• pp.52-58
• /
• 2012

The experiment was conducted under the Department of Animal Breeding and Genetics, Bangladesh Agricultural University (BAU), Mymensingh from June, 2001 to December, 2005 in two different locations (Central Cattle Breeding and Dairy Farm and Bangladesh Livestock Research Institute in Savar, Dhaka) to observe ovarian response to different doses of FSH in three different genotypes of cattle- indigenous Local, Pabna cattle and Friesian${\times}$Local cross. Five different dose levels used were 200, 240, 280, 320 and 360 mg. Ovarian response as corpus luteum (CL), recovered embryo (RE) and of transferable embryos (TE) count in Local were significant for 320, 280 and 280 mg respectively. In Pabna cattle CL, RE and TE count were found significant for 360, 320 and 320 mg respectively. In Friesian${\times}$Local cross CL, RE and TE count were found significant for 360, 320 and 320 mg respectively. The excellent quality embryos showed significantly the highest yield ($1.80{\pm}0.20$) in the 240 and 280 mg FSH levels in Local genotype. In Pabna cattle, the highest yield ($2.00{\pm}0.32$) was found at FSH level 320 mg. In Friesian${\times}$Local, the highest yield ($2.20{\pm}0.20$) was found at FSH level 280 mg.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.2
• /
• pp.61-70
• /
• 2013

An application of the EQS (Eradi Quake System) bearings to a short period building structure and the structure earthquake responses according to the design parameters of the EQS are studied by the ICT Center case study. The features of the EQS application to seismic isolated building structures are investigated, and the design procedure to determine the yield load and the secondary stiffness of the EQS is also studied. A computational analysis is performed to confirm the applicability of the EQS to the building structure and the earthquake responses according to the design parameters. The ICT Center in Indonesia is adopted as an application case of the EQS. The application of the EQS is found to extend the fundamental period of the ICT Center. Three types of EQS with different yield loads and secondary stiffness are designed and applied in the earthquake response analyses. The analysis results show the response of the structure with respect to the design parameters and which type of EQS is suitable for the ICT Center.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.497-506
• /
• 2013

The optimal condition for the torrefaction of eucalyptus (Eucalyptus globulus) was investigated by response surface methodology. The carbon content in the torrefied biomass increased with the severity factor (SF), while hydrogen and oxygen contents decreased. The calorific value of torrefied biomass ranged from 20.23 to 21.29 MJ/kg, depending on the torrefaction conditions. This implied that the energy contained in the torrefied biomass increased by 1.6 to 6.9%, when compared with that of the untreated biomass. The weight loss of biomass increased as the SF increased. The Code level of reaction temperature had the highest impact on the energy yield of torrefied biomass, while the effect of Code level of reaction time was considerably low. The highest energy yield was obtained at low SF.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.209-214
• /
• 1994

A study was conducted to study yield response and nutrient uptakes with N, P, K application. Its growth and root yield of Aralia continentalis was increased along with the added amount of fertilizer, and optimum fertilization rates of N, P, K were 38, 21, 18kg/10a, respectively. On the path coefficient analysis between the growth characters and root yield, its values showed in the order of plant height, root width, number of budstocks, number of branch, stem width and number of root. Relative yield of non-fertilization against fertilization of N, P, K were low in the order of N, P and K, that is, responses of fertilization on root yield of Aralia continentalis were affected greatly in the order of N, K and P, but the fertilization efficiency was high in the order of K, P and N. Calcium content was the highest and phosphorus content was the lowest among the mineral nutrients contained in the leaf, but relationships between nitrogen content and root yield was showed positive correlation the difference distinctly between the chemicals and the organics.

• Research in Plant Disease
• /
• v.12 no.3
• /
• pp.231-234
• /
• 2006

The influences of powdery mildew caused by Sphaerotheca fusca were assessed on cucumber to verify the economic injury level and yield response. Based on the relation of disease severity and yield response, economic threshold was determined by grading the disease severity of powdery mildew. Yield loss simulation due to damage of powdery mildew was conducted by defoliation of lower cucumber leaves in two seasons. The minimum number of leaves was 10 in spring season and 13 in autumn season which made no distinct difference on cucumber yield. The whole yields of cucumber was reduced as the disease severity was increased. Therefore occurrence of powdery mildew have a negative effect on cucumber yield. The regression equation between disease severity and yield loss showed Y=-57.237x+6143.1, $R^2=0.9628$. This equation suggests the disease severity of economic threshold is 17.6%, which is 3% reduction point of yield based on yield and economic relations. These results suggest that application of fungicide should be needed when 1 or 2 leaves of cucumber are infected by powdery mildew in the growing season.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.59-66
• /
• 2017

Modern seismic codes rely on performance-based seismic design methodology which requires that the structures withstand inelastic deformation. Many studies have focused on the inelastic deformation ratio evaluation (ratio between the inelastic and elastic maximum lateral displacement demands) for various inelastic spectra. This paper investigates the inelastic response spectra through the ductility demand ${\mu}$, the yield strength reduction factor $R_y$, and the inelastic deformation ratio. They depend on the vibration period T, the post-to-preyield stiffness ratio ${\alpha}$, the peak ground acceleration (PGA), and the normalized yield strength coefficient ${\eta}$ (ratio of yield strength coefficient divided by the PGA). A new inelastic deformation ratio $C_{\eta}$ is defined; it is related to the capacity curve (pushover curve) through the coefficient (${\eta}$) and the ratio (${\alpha}$) that are used as control parameters. A set of 140 real ground motions is selected. The structures are bilinear inelastic single degree of freedom systems (SDOF). The sensitivity of the resulting inelastic deformation ratio mean values is discussed for different levels of normalized yield strength coefficient. The influence of vibration period T, post-to-preyield stiffness ratio ${\alpha}$, normalized yield strength coefficient ${\eta}$, earthquake magnitude, ruptures distance (i.e., to fault rupture) and site conditions is also investigated. A regression analysis leads to simplified expressions of this inelastic deformation ratio. These simplified equations estimate the inelastic deformation ratio for structures, which is a key parameter for design or evaluation. The results show that, for a given level of normalized yield strength coefficient, these inelastic displacement ratios become non sensitive to none of the rupture distance, the earthquake magnitude or the site class. Furthermore, they show that the post-to-preyield stiffness has a negligible effect on the inelastic deformation ratio if the normalized yield strength coefficient is greater than unity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1626-1631
• /
• 2010

An experiment was conducted to evaluate the effect of dietary replacement of normal maize (NM) with quality protein maize (QPM) on performance, immune response and carcass characteristics of broiler (Krishibro) chickens. Six experimental diets were prepared separately for starter and finisher phases. Diet 1 was a control diet formulated with NM and soybean meal. In diets 2-5, the NM was replaced with QPM at 25, 50, 75 and 100%, respectively. Diet 6 was the same as the control diet, but supplemented with synthetic lysine similar to the industry standard. Each test diet was fed to 8 replicates, each of 5 chicks, reared in stainless steel battery brooders. The AME content of QPM (3382 kcal/kg) was similar to that of NM (3,352 kcal/kg), but protein (9.91 vs. 8.94%), lysine (0.40 vs. 0.26%) and tryptophan (0.09 vs. 0.07%) contents of QPM were higher than NM. Dietary replacement of NM with 50% QPM significantly (p<0.05) improved body weight gain, feed conversion ratio, humoral immune response, relative bursa weight, and breast muscle yield and lowered abdominal fat content. No further improvement in these parameters was recorded by increasing the level of replacement of NM with QPM to either 75% or 100%. Further, the improvement noticed in the 50% QPM group was similar to the group fed the NM diet with lysine supplementation, and thus dietary replacement of NM with QPM at 50% did not need extra synthetic lysine supplementation. It is concluded that dietary replacement of NM with QPM at the 50% level resulted in optimum performance, higher breast muscle yield and higher immune response in broiler chickens.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.492-496
• /
• 2012

Fertigation with drip irrigation provides effective and cost-efficient way to supply both nutrient and water to crop. However, inappropriate management of fertigation systems may cause inefficient nutrient and water use, thereby diminishing expected yield benefits as well as contributing to deterioration of soil properties. In this study, greenhouse experiments were conducted to investigate the optimal concentration of N, P and K fertigation solution for maximum production of oriental melon (Cucumis melo L.) using a response surface methodology, to evaluate an efficiency of nutrients uptake and an effect on soil chemical properties. Canonical analysis of response surface and contour plot interpretation revealed that $108.3mg\;L^{-1}$ of nitrogen (N), $54.8mg\;L^{-1}$ of phosphorous (P) and $158.3mg\;L^{-1}$ of potassium (K) resulted in maximim yield of oriental melon ($2,966kg\;10a^{-1}$). Compared to conventional practice, fertigation increased fruit yield up to 23.0% (p<0.001), uptake of N and K by plant also up to 33.3% (p<0.001) and 15.7% (p<0.01), respectively. These results suggest that fertigation has the advantage of the increase in yield and fertilizer use efficiency.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2008

Azuki bean has never been commercially grown in Thailand, due in part to a lack of suitable varieties. A core collection of 114 azuki bean accessions, originally from different parts of China(northern, central, southern) representing the germplasm of Chinese land races, were evaluated in the experimental field of the Institute of Vegetable Crops, Jiangsu Academy of Agricultural Sciences, China from June to October 2004. The same experiment was repeated at Kamphaeng Saen campus of Kasetsart University, Thailand from February to May 2005. Yield, yield components, and agronomic traits were recorded in all accessions in order to identify certain genotypes for further investigation. The statistical parameters that were used as indicators of phenotypic variation were mean, coefficient of variability(CV), correlation coefficient(r), range, mean difference, and phenotypic clustering of the accessions. The results indicated that the azuki bean varieties planted in Kamphaeng Saen were shorter, earlier in growing duration, and lower in plant height, seed yield per plant, 100-seed weight, and pods per plant as compared to when they were grown in China. This discrepancy was caused largely by the combined effect of temperature, rainfall, and day length. The traits that were rather stable in both locations were branches per plant and seeds per pod. Azuki bean varieties from northern China showed higher response to the changing environments compared with those from central and southern China. Some agronomic traits showed high correlation coefficient between the environments in Thailand and China. The CV of agronomic traits in both locations were ranked in descending order as follows: seed yield per plant, pods per plant, branches per plant, plant height, 100-seed weight, seeds per pod, and growing duration. The CV of seeds per pod and branches per plant were almost the same in both locations. Yield per plant in China correlated well(r=0.75) with pods per plant, but not with the other traits. Based on their response to both environments, the azuki bean accessions can be broadly divided into four groups, viz. northern 1, northern 2, central, and southern. This implied that there was more diversity, but probably less stability among the accessions originating from northern China.