• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.141-146
• /
• 2011

Successful coating of high quality glassy carbon is introduced by applying high pressure during the curing process of dip-coated phenol resin on graphite. The dependence of the applied pressure on the quality of the glassy carbon layer has not been reported so far. Pressure was changed from 0 to 400 psi during curing at $200^{\circ}C$. After carbonized at $1100^{\circ}C$ in inert atmosphere for the 400 psicured sample, as a promising result, a thick (~ 3 mm) and smooth glassy carbon layer could be obtained without any breakage, and the yield of carbonization was remarkably increased. It is believed that the cross-linking of resins results in decreasing volatile contents and, thus, increasing the yield of the glassy carbon. The origin of the improvement is discussed on the basis of several analytical results including FE-SEM, FT-IT and Raman spectrum.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.254-259
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the eighteen cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the optimal improvement of dent resistance.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.2-9
• /
• 1978

A review of factors influencing grass and clover establishment, survival and yield at oversowing was made from the experimental results of home and abroad. The following conclusions are considered: (1) The existing vegetation present at oversowing appeared to be the most critical factor reducing establishment and survival of grass. Therefore, it is essential to check competition from the native vegetation before oversowing. (2) Although lime had comparatively little effect on yield of grassland, the general effect of lime should be more emphasized under our acid soil conditions to promote the availability of all the essential elements and the growth of microorganisms, and to reduce the toxic effects of nutrients. One to two tons of lime per ha at oversowing would be useful. (3) Phosphorus is one of the nutrients most generally deficient in grassland soils of Korea, consequently, this nutrients applied at oversowing is very effective. Application as much as 200kg of phosphorus per ha would be essential. (4) The effect of nitrogen on the establishment and survival of grass depends on the amount and density of the herbage present. The use of nitrogen in dense herbage adversely affected grass establishment and survival, possible because the fertilizer stimulated the growth of the eisting herbage. Around 40kg of nitrogen per ha may be enough at oversowing (5) Potassium is not as universally deficient in soils of native grassland as phosphorus. Therefore, it cannot be over-emphasized at oversowing. Studies determinig the optimum amount of potassium at of oersowing are needed.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.3
• /
• pp.138-145
• /
• 2012

An ${\alpha}$-Ferrite (Fe) powder dispersed with 4 vol.% of $Al_2O_3$ was successfully produced by a simple miling at 210 K with a mixture of $Fe_2O_3$, Fe and Al ingredient powders, followed by 2 step high temperature consolidation: Hot Pressing (HP) at 1323 K and then Hot Isostatic Pressing at 1423 K. The microstructure of the consolidated material was characterized by standard metallographic techniques such as XRD (X-ray Diffraction), TEM and STEM-EDS. The results of STEM-EDS analysis showed that the HIPed materials comprised a mixture of pure Fe matrix with a grain size of ~20 nm and $Al_2O_3$ with a bimodal size distribution of extremely fine (~5 nm) and medium size dispersoids (~20 nm). The mechanical properties of the consolidated materials were characterized by compressive test and micro Vickers hardness test at room temperature. The results showed that the yield strength of the ODS (Oxide Dispersion Strengthened) Fe alloy are as much as $674{\pm}39$ MPa and the improvement of the yield strength is attributed to the presence of the fine $Al_2O_3$ dispersoid.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.2
• /
• pp.61-67
• /
• 1978

Drainage furnished air to provide favorable soil environment forfice growth at the late stage. A heavier fertilizer application and a denser plant density increase. Yield and yield component element by root activities and various substence productive element under sub-drainage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.329-344
• /
• 1997

To improve germination and growth of forages of hill pasture seeds of several forages were osmotically primed with polyethylene glycol (PEG) under different PEG concentrations, treatment periods, and temperatures. Seeds were coated with several materials, and tested for germination. The best primed or coated seeds in germination tests were surface sow on hilly area. The results obtained are summarized as follows; 1. Osmotic priming with PEG accelerated germination of forages and reduced time taken for germination. 2. Germinability was best when the seeds of Tama ryegrass or orchardgrass were treated for 6-9 days at 30g PEG1100 ml water, red clover or white clover for 3, or 9 days in 20g PEG1100 ml water at $10^{\circ}C$. 3. Priming seeds of Tama ryegrass or orchardgrass in 30% PEG solution for 6 days, and seeds of red clover or white clover in 20% PEG solution for 6 days at $15^{\circ}C$ were most effective in germination, similar to priming at $10^{\circ}C$ . 4. Priming seeds of Tama ryegrass at 15C, and orchardgrass, red clover, or white clover at $10^{\circ}C$ were effective in germination than priming at other temperatures. 5. Osmotic priming with PEG accelerated germination of forages compared to coated seeds in Petri-dishes, while coated seeds germinated more slowly, but showed better emergence and superior growth to those of primed or intact seeds in the field. 6. Priming seeds increased yield slightly, and coating seeds significantly increased its yield on hilly area.

• YAKHAK HOEJI
• /
• v.33 no.6
• /
• pp.365-371
• /
• 1989

Microbiological conversion of sterols to 17-ketosteroids has been recognized as a source for commercial preparation of steroidal drugs. In order to develop bacterial strains and process with Brevibacterium lipolyticum IAM 1398 capable of converting cholesterol to 1,4-Androstadiene-3,17-dione (ADD) at about 27% yield, we studied on strain improvement, fermentation condition and whole cell immobilization. By using UV and/or NTG as mutagens, a mutant to convert cholesterol to ADD with higher yield than 60% was selected. Better production of ADD was manifested in the case of maltose used as a supplemental carbon source, and yeast extract or soytone as a nitrogen source. Addition of tween 80 (0.05%) as a surfactant beneficial for increasing the productivity. The optimal initial pH of the medium was 6.5 and optimal culture temperature was $30^{\circ}C$. Whole cell immobilization by using carrageenan, agar, alginate and acrylamide was carried out and the activity of conversion was tested. In the case of carrageenan and agar, immobilized cells were active for at least two cycles of fermentation.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2141-2143
• /
• 2000

In this paper, high concentration yield multi-discharge type ozonizer (MDO) of new discharge type using superposed silent discharge was designed and manufactured, MDO can be consisted with 3 kind of multi discharge type ozonizer (MDO) in accordance with power supply method that supplying power, which has 180[$^{\circ}$] phase difference, to 3 electrodes and double gap. At the moment, discharge characteristics and ozone generation characteristics of each MDO were investigated in accordance with quantity of supplied gas, the number of MDO, and the shapes of each MDO. In result, ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185 [ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• Steel and Composite Structures
• /
• v.8 no.4
• /
• pp.313-328
• /
• 2008

This study attempts to suggest bending reinforcement method by applying bending reinforcement to composite profile beam in which the concept of prefabrication is introduced. Profile use can be in place of framework and is effective in improvement of shear and bending strength and advantageous in long-term deflection. As a result of experiment, MPB-CB2 with improved module had higher strength and ductility than the previously published MPB-CB and MPB-LB. In case of bending reinforcement with deformed bar and built-up T-shape section based on MPB-CB2, the MPB-RB series reinforced with deformed bar were found to have higher initial stiffness, bending strength and ductility than the MPB-RT series. The less reinforcement effect of the MPB-RT series might be caused by poor concrete filling at the bottom of the built-up T-shape. In comparison between theoretical values and experimental values using minimum yield strength, the ratio between experimental value and theoretical value was shown to be 0.9 or higher except for MPB-RB16 and MPB-RT16 that have more reinforcement compared to the section, thus it is deemed that the reinforced modular composite profiled beam is highly applicable on the basis of minimum yield strength.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.67-72
• /
• 2013

Temperature is a critical parameter in yield improvement for wafer manufacturing. In chemical vapor deposition (CVD) equipment, crack defect in ceramic heater leads to yield reduction, however, there is no suitable ceramic heater fault detection system for conventional CVD equipment. This paper proposes a short-time zero-crossing rate based fault detection method for the ceramic heater in CVD equipment. The proposed method measures the output signal ($V_{pp}$) of RF filter and extracts the zero-crossing rate (ZCR) as feature vector. The extracted feature vectors have a discriminant power and Gaussian mixture model (GMM) based fault detection method can detect fault in ceramic heater. Experimental results, carried out by measured signals provided by a CVD equipment manufacturer, indicate that the proposed method detects effectively faults in various process conditions.