• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.317-329
• /
• 2019

Slag was collected from the iron-producing furnace site in Saengsoegol, Baegun mountain, where iron was manufactured by a righteous army against Japan in the Gwangyang region; then, the iron-manufacturing technique of the early modern period was investigated through scientific analysis. In the microstructure analysis results of the selected samples, iron bloom was mainly observed together with magnetite and fayalite. In the component analysis results of the compounds, it was confirmed that the furnace was built by using gangue of alkali feldspar or plagioclase series, and the ironmaking work was performed at a high temperature of at least 1050℃, because mullite was identified together with cristobalite and hercynite. Based on the chemical composition, it was speculated that low-grade iron ores were used as raw materials, and it seemed that the yield was low, because the total Fe content of the smelting slag samples was 37.72-49.93%. It was difficult to confirm whether a slag former was used, and it seemed that materials easily obtained nearby were used when the furnace was built, without considering the corrosion resistance. It appeared that the ironmaking work was performed at the Gwangyang Saengsoegol iron-producing furnace based on the direct ironmaking method in an environment that could escape the vigilance of the Japanese Empire to produce weapons that would be used for the resistance against Japan. It seemed that there was neither an advanced ironware production system nor a mass production system, and small-scale works were performed in short periods of time.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.744-747
• /
• 2010

In this study, antioxidant activity of enzymatic, ethanolic and aqueous extract from Blueberry were evaluated by measuring the scavenging activity on 1,1-diphenyl-2-picrylhydrazyl (DPPH). Enzymatic extract were prepared by enzymatic hydrolysis of Blueberry using food grade five different carbohydrases (Viscozyme, celluclast, AMG, Termarmyl, Ultraflo) and five proteases (Protamex, Kojizyme, Neutrase, Flavourzyme, Alcalase). The ethanol extract were lower than enzymatic extracts in yield, but higher in ployphenolic contents. The 70% ethanolic extract of Blueberry exhibited better DPPH radical scavenging activity compared to those of other extracts. These results suggest that Blueberry would be a good raw materials for antioxidant.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.3 s.131
• /
• pp.79-88
• /
• 2005

This research studied the utilization of the bed log wastes as a papermaking grade pulp. Five different bed log samples from shiitake mushroom (Lentinus edodes (Berk.) Sing) cultivation were collected by the cultivating periods of 1 to 5 years. The wood chemical composition and the characteristics of kraft pulping of each sample were investigated. The results of chemical composition showed that the rate of carbohydrate (glucose and xylose) content in sapwood was decreased as the cultivation period was increased. In heartwood, there was no significant difference. The screening yield of non-cultivated bed log from kraft pulping was higher than that of cultivated one, but the reject of cultivated one, especially for 5 year-cultivated, was lower than non-cultivated bed log. The fiber length and width was continuously decreased as the cultivation period was increased. Therefore, the freeness of the pulp from the cultivated bed log was sharply decreased comparing to non-cultivated due to the fiber cutting and the increased fine content. The dry strengths were increased according to the increasing addition level of bed log kraft pulp to KOCC and non-cultivated wood pulp. From the overall results, the pulp from 5 years cultivated bed log can be reasonably used if it is mixed with long fiber pulp for advantages such as reducing beating time.

• KIEAE Journal
• /
• v.14 no.2
• /
• pp.77-86
• /
• 2014

Plenty of efforts have been made in the traditional architecture of Korea, Hanok, to develop various elements such as restoration, the introduction of new design, and energy-saving while systemic setups on standard and evaluation of eco-friendly energy design of Hanok are lacking. If we evaluate energy performance based on current standards without reflecting unique features of Hanok on the system, Hanok will be included in the very low grade among the residential buildings being included in the approval system of eco-friendly architecture or the unique features will be modified and the burden of increased construction cost. Therefore, this study is to prepare the basic reference for the introductory evaluation system by evaluating the energy performance level of NEO-Hanok based on the current building energy rating system. The result for NEO-Hanok based on the building energy rating system, we propose the rating standard with scorecard elements of NEO-Hanok by considering the necessity of identity and standard for NEO-Hanok. As a result of infiltration test to check the tightness, it was measured as 10.81 times/h (50 ACH). As we switch from the main insulation for the wall from the glass wool 64k(0.035W/mk) to rigid polyurethane foam first class first unit (0.024W/mk), the result was slightly increased from the first demand quantity rating yield $249.8kWh/m^2{\cdot}yr$ to $235.0kWh/m^2{\cdot}yr$. Current certificate system is focused more on the heating load than the cooling load, it is disadvantageous for Hanok, which has less cooling energy consumption in summer. The rating result from the target building study is level 4.

• 한국정보교육학회:학술대회논문집
• /
• 2011.01a
• /
• pp.29-35
• /
• 2011

With the society rapidly changing, children are being asked respond quickly to these changes. Therefore, how children learn and think comes before what to teach, and we need to come up with ways to nurture their ability to proactively control their lives and studies. We attempt to use the technique of Accelerated learning, which focuses on the student's own ability toacquire and use information, to enhance the efficiency of information technology education. We designed the PLAY model based on accelerated learning and Multiple Intelligence Theory, and conducted ten experimental sessions on two groups of 70 second grade elementary school students.

• Laser Solutions
• /
• v.10 no.3
• /
• pp.25-32
• /
• 2007

The effect of welding speed on the weldability, microstructures, hardness, tensile property of Nd:YAG laser welding joint in 600MPa grade precipitation hardening high strength steel was investigated. A shielding gas was not used, and bead-on-plate welding was performed using various welding speeds at a power of 3.5kW. Porosity in the joints occurred at 1.8m/min, but were not observed over the welding speed of 2.1m/min. However, spatter occurred over the welding speed of 6.6m/min. The hardness was the highest at heat affected zone(HAZ) near fusion zone(FZ), and was decreased on approaching to the base metal. The maximum hardness increased with increasing welding speed. The microstructure of FZ was composed of coarse grain boundary ferrite and bainite(upper) but the HAZ near the FZ contained bainite(Lower) and fine ferrite at a low welding speed. With increasing welding speed, ferrite at the FZ and the HAZ became finely and upper binite changed to lower bainite. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal, and the tensile strength and the yield strength of joints was equal to those of raw material. Elongation was found to be lower than that of the raw material.

• Korean journal of food and cookery science
• /
• v.27 no.1
• /
• pp.85-99
• /
• 2011

Grinding is an indispensible step in preparation of espresso coffee. The purpose of this study was to evaluate physicochemical and sensory characteristics of espresso according to the grinding grades of coffee beans. Specifically, physicochemical characteristics according to the grinding grades of coffee beans were tested based on foam index, persistence of foam, total solids, concentration, extraction yield, pH, viscosity, total soluble solid content and density. With regard to sensory characteristics, QDA were carried out by 10 trained panels. Persistence of foam, total solids, concentration, extraction, pH and viscosity in physicochemical test showed significant differences among the three categories of the samples. In other words, the finer the size of particles was, the higher value was, at the p=0.001 value. Meanwhile, the value of foam index and total soluble solid content to the grinding grades was the highest in 'fine', at the p=0.001 value. Tiger-skin effect in crema, an important attribute for excellent espresso coffee, was perceived by all of the panels in 'fine'. Also, intensity of flavor was perceived as to the strongest in 'fine'. Moreover, 'fine' had the sweetness to balance the acids and bitters. In conclusion, according to the grinding grades, it was identified that there were differences in the physicochemical and sensory characteristics. Furthermore, when the size of particles was 'fine', it brought to the most positive result.

• Clinical and Experimental Reproductive Medicine
• /
• v.47 no.3
• /
• pp.221-226
• /
• 2020

Objective: We attempted to identify the optimal cutoff numbers of mature oocytes that would produce at least one or multiple top-quality (grade A) day-3 embryos in normal responders undergoing stimulated in vitro fertilization (IVF) cycles. Methods: We selected 210 fresh IVF cycles performed in 170 infertile women at a single center from January 2014 to November 2019. Four to 14 (total) oocytes were obtained in all cycles after conventional ovarian stimulation. A receiver operating characteristic curve analysis was performed to find the moderate and extreme cutoff numbers of mature oocytes that would produce ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos. Results: The cutoff number of mature oocytes was significantly correlated with the number of top-quality embryos (r = 0.467, p= 0.000). The moderate cutoff number of mature oocytes was ≥ 3, ≥ 5, ≥ 5, ≥ 6, and ≥ 6 for obtaining ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos, respectively. The extreme cutoff number of mature oocytes was ≥ 9, ≥ 9, ≥ 10, ≥ 10, and ≥ 11 for obtaining ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos, respectively. Conclusion: We present the optimal cutoff numbers of mature oocytes that would yield ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos with 95% specificity. Our findings could help infertility clinicians to set target mature oocyte numbers in women undergoing stimulated IVF cycles.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.63-63
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matches the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion bulge test in underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.