• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.193-200
• /
• 2016

Purpose: New low-cost oilseeds are needed to meet an ever-increasing demand for oil for food, pharmaceutical, and industrial applications. African oil bean seed is a tropical crop that is underutilized and has high oil yields, but there have been no studies conducted on its mechanical oil expression up to now. The objective of this work was to investigate the effect of moisture content and seed dimensions on mechanical oil expression from the seeds. Methods: Fresh oil bean seeds were procured, de-hulled, and cleaned. Initial seed moisture content, obtained in accordance with the ASAE standard, was 12% dry basis (db). The seeds were further conditioned by dehydration and rehydration prior to oil expression to obtain four other moisture levels of 8, 10, 14, and 16% db. The major diameter of the seeds was measured using digital vernier calipers, and the seeds were classified into size dimensions (< 40, 41-45, 46-50, 51-55, and > 55 mm). The oil yield and expression efficiency were obtained in accordance with standard evaluation methods. Results: The highest oil yield and expression efficiency (47.74% and 78.96%, respectively) were obtained for a moisture content of 8% db and seed dimensions of < 40 mm, while the lowest oil yield and expression efficiency (41.35% and 68.28%, respectively) were obtained for a moisture content of 14% db and seed dimensions between 51-55 mm. A mathematical model was developed to predict oil yield for known moisture content and seed dimensions, with a coefficient of determination $R^2$ of 95% and the confidence level of the predictive model of 84.17%. The probability of prediction F ratio showed that moisture content influence was more significant than seed dimensions. Conclusions: The higher the moisture content and larger the seed dimensions, the lower the oil yield from African oil bean seeds.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.642-644
• /
• 2010

With the rapid increase occurring in both the capacity and density of memory products, test and repair issues have become highly challenging. Memory repair is an effective and essential methodology for improving memory yield. An SoC utilizes built-in redundancy analysis (BIRA) with built-in self-test for improving memory yield and reliability. This letter proposes a new heuristic algorithm and new hardware architecture for the BIRA scheme. Experimental results indicate that the proposed algorithm shows near-optimal repair efficiency in combination with low area and time overheads.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.89-97
• /
• 1989

Graft polymerization of MMA onto cotton fiber was carried out in two ways, two step graft polymerization and one step emulsion graft polymerization, using tetravalent cerium ion as an initiator. At two step graft polymerization, the first step was the pretreatment of cotton fiber with an aqueous initiator solution and the second was the grafting pretreated cotton fiber in the monomer solution. In case of one step emulsion graft polymerization, MMA was emulsified with SLS in initiator solution. Under the various graft polymerization conditions, graft yield, graft efficiency and from the Arrhenius plot the apparent activation energy were compared. The results of this study were as follows: 1. Graft yield and graft efficiency of emulsion graft polymerization were higher than those of two step graft polymerization. 2. In case of two step graft polymerization, graft yield was affected by the pretreatment time of cotton fiber with an aqueous initiator solution. And graft yield of emulsion graft polymerization was increased with the concentration of emulsifier below cmc of SLS and was decreased thereafter. 3. Elevation of temperature resulted increase in graft yield for both grafting methods. The apparent activation energy of emulsion graft pelymerzation was lower than that of two step graft polymerization. 4. Increased reaction time increased in graft yield, but decreased in graft efficiency. 5. Moisture regain of grafted cotton was decreased with graft yield.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.297-310
• /
• 2023

M.7 rootstock is moderately resistant to fire blight. However, M.7 is generally too vigorous for high-density apple systems, but it can be grafted onto cultivars that exhibit weak tree growth, such as 'Sansa'. This study investigated the vegetative growth, yield, and fruit quality of 'Sansa' apple trees grafted on M.7 or M.9 rootstocks to assess the feasibility of establishing domestic high-density apple systems using M.7 and to determine the optimum exposure length for rootstocks. Trees were planted with exposed rootstock lengths of 5, 10, and 15 cm. The vegetative growth of apple trees grafted onto M.7 was greater than that of M.9 and vegetative growth tended to decrease as the exposed length of rootstock increased. However, the differences in yield per tree, average weights, soluble solids contents, and titratable acidity due to the rootstock and its exposure length varied. The accumulated yield over a 10 year period and the yield efficiency of M.7 were lower than that of M.9 and the yield efficiency tended to decrease as the exposed length of rootstock increased. When apple trees were grafted onto M.9, biennial bearing and tree vigor weakening occurred if the exposed length of the rootstock was over 10 cm. Conversely, when apple trees were grafted onto M.7, vegetative growth was excessive if the exposed length of rootstock was below 10 cm. Based on the results from this study, the optimum M.7 and M.9 exposure lengths for 'Sansa' were 15 cm and 5 cm, respectively.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2004

We have calculated the power extraction efficiency and the lasing wavelength distribution of complex-coupled(CC) DFB lasers above threshold for various｜$\chi$L｜ and facet reflectivity combinations, and we have compared the results with those at threshold. Also, we have investigated the effect of coupling coefficient ratio(CR) and the reflectivity of AR facet on the power extraction efficiency and the lasing wavelength distribution. At threshold, the single mode yield as a function of power extraction efficiency of in-phase(IP) CC DFB lasers is the same as that of anti-phase(AP) CC DFB lasers. Above threshold, however, the single mode yield as a function of power extraction efficiency of IP CC DFB lasers is much larger than that of AP CC DFB lasers. For IP CC DFB lasers, AR-HR combination has high single mode yield and large power extraction efficiency compared to other facet combinations. IP CC DFB laser with AR-HR combination for ｜$\chi$L｜of 0.8 has the highest single mode yield and largest power extraction efficiency above threshold among the cases considered. For AR-HR combination, as CR increases and the reflectivity of AR facet decreases, both single mode yield and power extraction efficiency increase due to the reduction of the spatial hole burning effect. For AR-HR combination, the lasing wavelength of CC DFB laser has distributed over the stopband of DFB. As CR increases, the lasing wavelength concentrates on the long wavelength side for IP CC DFB laser, while on the short wavelength side for AP CC DFB laser. As ｜$\chi$L｜ increases, the width of the wavelength distribution decreases and the lasing wavelength moves to the long wavelength side.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.563-569
• /
• 2013

This experiment was carried out to investigate the effect of liquid-pig-manure application method (Tr.1: surface appl. LPM 150%, Tr.2: surface appl. LPM 50% + LPM 50%, Tr.3: chemical fertilizer, Tr.4: soil injection LPM 150%, Tr.5: soil injection LPM 50% + surface appl. 50%, Tr.6: no fertilizer) and the economic efficiency of yield on forage crops cultivaion. In barley cultivation experiment, Tr.5 was found to be best, showing the yield of 1,462 kg $10a^{-1}$, and followed by Tr.2(1,226 kg $10a^{-1}$), Tr.3(1,226 kg $10a^{-1}$), Tr.4(1,225 kg $10a^{-1}$) and Tr.1(1,209 kg $10a^{-1}$) in order. In maize cultivation experiment, Tr.4 was found to be best, showing the yield of 2,142 kg/10a, and followed by Tr.1(2,125 kg $10a^{-1}$), Tr.3(2,024 kg $10a^{-1}$), Tr.5(2,011 kg $10a^{-1}$) and Tr.2(1,925 kg 1$10a^{-1}$) in order. The income was showing 1,274,000 ~ 1,591,000 Won $10a^{-1}$ in barley, whereas 766,000-794,000 Won 1$10a^{-1}$ in maize. There was more economical efficiency in barley cultivation than maize cultivation. Rather than the LPM surface application, LPM soil injection was more effective.

• Korean Journal of Plant Resources
• /
• v.22 no.3
• /
• pp.220-226
• /
• 2009

An experiment was conducted to find out among 9 trap settings the most appropriate site for trap placement in the Brinjal field based on Brinjal shoot and fruit borer trapping efficiency, shoot and fruit infestation, healthy and total fruit yield, and BCR. The efficiency of different trap setting positions varied significantly. Trapping efficiency observed the $T_{1}$ ensured the minimum shoot and fruit infestation 10.02% and 20.95%, respectively, minimum infested fruit yield (4.75 ton/ha), maximum healthy and total fruit yield (26.72 and 31.47 ton/ha) and the maximum BCR (1.70), which was followed by $T_{2}$ and $T_{4}$. The minimum trapping efficiency of $T_{9}$ treatment led the maximum shoot and fruit infestation 13.89 and 29.26%, respectively, maximum infested fruit yield (7.59 ton/ha), minimum healthy and total fruit yield (17.74 and 25.32 ton/ha) and the minimum BCR (1.00). A correlation between the number of BSFB adults trapped from the most efficient trap setting and the shoot and fruit infestation recorded and found a linear positive correlation between number of BSFB adults trapped and shoot infestation (r = 0.781) and fruit infestation (r = 0.810). The effect of pheromone trap positions observed in this study may be attributed to the easy accessibility of the lures and traps, when they are placed at the canopy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.213-219
• /
• 2013

A field study was conducted to understand nitrogen use efficiency of high yielding Japonica rice varieties under three levels of nitrogen fertilizer (90, 150 and 210 kg N $ha^{-1}$) in Iksan, Korea. Two high yielding rice varieties, Boramchan and Deuraechan, and an control variety, Dongjin2, were grown in fine silty paddy. Nitrogen use efficiencies (NUE) were 83.3, 56.3, and 41.2 in 90, 150, and 210 kg N $ha^{-1}$ fertilizer level, respectively. Total nitrogen uptake varied significantly among nitrogen levels and varieties. Variety Dongjin2 showed the highest nitrogen uptake efficiency (NUpE), while Boramchan and Deuraechan showed higher nitrogen utilization efficiency (NUtE). However, Nitrogen harvest index (NHI) was higher in Boramchan (0.58) than Deuraechan (0.57) and Dongjin2 (0.53). Rough rice yield showed linear relationship with total nitrogen uptake ($R^2$=0.72) within the range of nitrogen treatments. Boramchan produced significantly higher rough rice yield (8546 kg $ha^{-1}$) which mainly due to higher number of panicles per $m^2$ compared to Deuraechan (7714 kg $ha^{-1}$). Deuraechan showed higher number of spikelets per panicle, but showed lower yield due to lower number of panicle per $m^2$. Rice varieties showed different nitrogen uptake ability and NUE at different nitrogen level. Plant breeders and agronomist should take advantage of the significant variations and relationships among grain yield, NUpE, and NUE.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.6
• /
• pp.737-741
• /
• 1996

Dry matter yield of reed canarygrass was investigated in uncultivated rice paddy in Korea, and an attempt was made to estimate the most economic and efficient cutting frequency and rates of nitrogen (N) fertilization, for increased production of reed canarygrass. Total dry matter yields of reed canarygrass per year were 7.4-15.7, 8.5-16.1, and 7.5-13.4 tons/ha in 3, 4, and 5 cutting frequencies, respectively, and over the N treatments of 0-120 kg N/ha/cut. When cut 3 or 5 times annually, the 2nd cut produced the highest proportion of total yield at 38.4 and 33.0%, respectively, when cut 4 times the 3rd cut was highest (38.3%). The ranges of economic N level, limiting N level and efficiency of dry matter production were 243.3-293.0, 387.2, and 14.6 kg DM/kg N, respectively. These indicators were particularly low for the 5 cutting frequency possibly because of the unusually high temperature in the summer season. The best cutting frequency for the dry matter production of reed canarygrass in 1994 was 3 per year because of the higher efficiency of dry matter production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1316-1323
• /
• 1999

Extensive emphasis on milk and milk fat yields with no diversion for beef performance increased the yield efficiency of North American dairy cattle. Heavy demand for North American genetics followed national strain comparison trials in Poland, and US and Canadian dairy cattle and germplasm still are an important source of genetics for many countries. Genetic improvement has accelerated in many countries because of the implementation of sampling programs for young bulls and improved evaluation procedures. Rapid access to information and more frequent calculation of genetic information also are having a positive impact on genetic improvement. Traits other than yield should be considered in a breeding program, but those traits mist have a reasonable opportunity for improvement and sufficient economic worth. Because of ever increasing efficiency, the world's milk supply comes from fewer cows each year. However, no decline in the rate of genetic improvement is apparent under current genetic practices; estimates of heritability are increasing, and a decline in yield efficiency is unlikely in the near future. As management improves, especially for subtropical conditions, many of the selection principles used in temperate climates will be adopted for more adverse environmental conditions.