• 한국초지조사료학회지
• /
• 제13권2호
• /
• pp.99-104
• /
• 1993

With a purpose of finding out the effects of phosphatic fertilizer application at the grassland establishment and management on the dry matter yield and quality of grasses, a field experiment was arranged with four treatments as a randomized complcte block design and lasted from September, 19 89 to October, 1991 in hilly area near Suwon. The results obtained are summarized as follows: 1. As a early plant growth. winter hardiness. growth vigour and coverage of grasses of the plots with phosphatic fertilizer were better than those of the plots without $P_2O_5$. and the effect of application at the management was much better than that at the establishment of grassland. 2. The effect of phosphatic fertilizer on DM yield of legume was higher than of grass. Total DM yield with phosphatic fertilizer at the only establishment (5.688 kg/ha). at the only management (8.014 kg/ha) and at both the establishment and management of grassland (1 1,082 kg/ha) was much more increased by 38, 95 and 169% than that without phosphatic fertilizer (4.1 19 kg/ha), respectively. 3. The chemical component of crude protein and crude fat with phosphatic fertilizer was a little higher, on the other hand, content of NFE was lower than that without $P_2O_5$ fertilization, but the contents of crude fiber and crude ash did not tend to differentiate between treatments. 4. Production of encrgy(TDN, StE and NEL) with phosphatic fertilization at the establishment and the management of grassland was appeared to increase by 34 to 390h and 72 to 99% than that without $P_2O_5$, respectively. Production of curde protein with $P_2O_5$ tended to be similar to production of energy.

• 한국약용작물학회지
• /
• 제19권6호
• /
• pp.441-445
• /
• 2011

This research was conducted to investigate the influence of variouis organic substrates on growth and yield of organically grown ginseng seedlings in a shaded plastic house. In the investigation of optimal substrate, the eight substrate were formulated by adjusting blending rate of peatmoss, perlite, coir dust(coco peat), and vermiculite. Then, the changes in physico chemical properties of root substrates as well as their influences on the growth characteristics and yield were determined at six months after sowing. The elevation of the blending rate of peatmoss from 50% to 70% with decrease in the rate of inorganic component (mixture of perlite and vermiculite) from 50 to 30% resulted in the increase in container capacities and decrease in total porosities and air-filled capacities. The concentrations of $NH_4-N$, $P_2O_5$ and K increased as the incorporation rate of castor seed meal, phosphate ore, and langbenite, respectively, were elevated during the root medium formulations. The PPV-1 and PPV-4 substrates produced high stem length, stem diameter, shoot fresh weight, leaf area and root length among eight substrate. Root fresh weight was heaviest in PPV-4 compound nursery media. The results of this experiment will be utilized in the new substrate application for ginseng organic culture in shaded vinyl house.

• Rapid Communication in Photoscience
• /
• 제3권4호
• /
• pp.81-84
• /
• 2014

To examine the microenvironmental effect of DNA on the photosensitized reaction, the electron-donor-connecting porphyrin, meso-(9-phenanthryl)-tris(N-methyl-p-pyridinio) porphyrin (Phen-TMPyP), was synthesized. Phen-TMPyP can bind to oligonucleotides with two binding modes, depending on the DNA concentration. The fluorescence lifetime measurement of Phen-TMPyP shows a shorter component than that of the reference porphyrin without the phenanthryl moiety. However, the observed value is much longer than those of previously reported similar types of electron-donor-connecting porphyrins, suggesting that electron-transfer quenching by the phenanthryl moiety is not sufficient. The fluorescence quantum yield of Phen-TMPyP ($5{\mu}M$) decreased with an increase in DNA concentration of up to $5{\mu}M$ base pair (bp), possibly due to self-quenching through an aggregation along the DNA strand, increased with an increase in DNA concentration of more than $5{\mu}M$ bp and reached a plateau. The fluorescence quantum yield of Phen-TMPyP with a sufficient concentration of DNA was larger than that of the reference porphyrin. The singlet oxygen ($^1O_2$) generating activity of Phen-TMPyP was confirmed by the near-infrared emission spectrum measurement. The quantum yield of $^1O_2$ generation was decreased by a relatively small concentration of DNA, possibly due to the aggregation of Phen-TMPyP, and recovered with a sufficient concentration of DNA. The recovered quantum yield was rather smaller than that without DNA, indicating the quenching of $^1O_2$ by DNA. These results show that a DNA strand can stabilize the photoexcited state of a photosensitizer and, in a certain case, suppresses the $^1O_2$ generation.

• 한국작물학회지
• /
• 제31권4호
• /
• pp.493-498
• /
• 1986

품종, 시비량 및 재배관리를 동일하게 처리하였을 경우 보급년대가 상이한 각종 재배교식의 차이에 따른 종실의 생산능력을 검정하기 위하여 관행조파(60$\times$18cm), 광파(60$\times$30cm), 협폭파(40$\times$18cm), 세조파(30$\times$5, 20$\times$5cm) 및 전면전층파 등 6종류의 재배양식과 휴립재배법인 휴립이조법, 휴립광산파( 120$\times$90cm 및 90$\times$70cm) 및 휴립계조파(120$\times$90cm, 6예) 등 4종 총 10개 재배양식을 사용하여 조강보리와 그루밀를 공시품종으로 하며 시험한 결과는 다음과 같다. 1. 잡초발생량은 비파종부분의 폭이 클수록 많았고 수량과 부의 상관관계를 보였다. 2. 근분포정도는 수분소모정도와 정의 상관을 보였으며 휴간거리가 클수록 비파종부분의 근분포가 빈약하였다. 3. 양분흡수정도는 전면전층로타리시비법을 사용하는 세조파, 전면전층파, 휴립구산파 등이 종자하부 일정위치에 시비하는 작조시비법보다 낮은 경향을 보였다. 4. 종자밀도가 높은 관행조반, 광파, 협폭파 및 휴립이조파가 군집상태의 군낙을 이루어 월동률이 높은데 반하여 종자밀도가 낮아 독립수로 월동하게되는 세조파, 광조파, 전면전층파에서는 미기상의 영향으로 월동상태가 불량하였다. 5. 수량에 가장 공헌도가 큰 것은 수수였으며 균등배치가 이루워진 세조파가 광이용효율이 높고 수량도 가장 높았다.

• 한국유기농업학회지
• /
• 제8권3호
• /
• pp.91-98
• /
• 2000

몇가지 토양미생물제 처리가 근대의 수량과 식물체 및 토양의 화학성분, 그리고 미생물상에 미치는 영향을 조사하였다. 모든 미생물제 처리구에서 무처리에 비하여 수량이 증가하는 경향이 있었고, 특히 BLCS cattle dropping 처리구가 가장 높았다. 식물체의 화학성분에서는 모든 철구에서 Mg의 함량이 증가된 것을 제외하고 다른 성분들은 처리간에 차이가 없었고, 토양의 화학성분에서는 Tomi 처리구에서 K와 Mg의 함량이 높았으나, 다른 처리구에서는 차이가 없었다. 토양의 미생물상을 조사한 결과, 총세균수에서는 Tomi 처리구가 가장 높았고 Husk+Palma 처리구가 가장 높았고 Husk+Palma와 Tomi 처리구에서도 몹시 증가되었다. Actinomycetes와 fungi에서도 Tomi 처리구가 매우 증가하였으나, 다른 처리구간에는 차이가 없었고, pseudomonas에서도 각 처리간에 차이가 없었다.

• 식물조직배양학회지
• /
• 제26권3호
• /
• pp.205-209
• /
• 1999

지황 (Rehmannia glutinosa) 우량종묘 생산을 위하여 조직배양에 의해 생산된 종묘의 포장수량성을 평가하고 지표성분인 Catalpol과 유리당 함량 특성을 비교한 결과는 다음과 같다. 조직배양주의 종근저장성은 재래종에 비하여 약간 양호한 경향이었다. 또한 근장, 근경 등의 뿌리생육이 왕성하여 조직배양주의 수량성은 서천재래종 384kg/10 a에 비하여 1년차 묘는 112%, 2년차 묘는 246%까지 증수되는 결과를 보였다. 성분함량 특성비교에서는 총당함량이 서천재래 1.86%에 비하여 조직배양 1, 2년차 묘는 각각 1.21, 1.10%를 보였고, 지표성분인 Catalpol도 서천재래 0.46%에 비하여 조직배양 1, 2년차묘는 0.4%로 약간 감소되는 경향이었다. 이상의 결과에서 지황 조직배양주의 수량성은 재래종에 비하여 증수되는 특성을 보였다. 그러나 유리당과 Catalpol 함량은 약간 감소되는 경향이었는데 모본식물과 큰 차이를 보이지는 않았다.

• 한국잡초학회지
• /
• 제9권2호
• /
• pp.103-107
• /
• 1989

논 제초제(除草劑) butachlor에 대한 유묘(幼苗)의 약해반응정도(藥害反應程度)가 다른 벼 5개 품종(品種)에 3가지 다른 약량(藥量)을 이앙시(移秧時)에 처리(處理)하여 이후(以後)의 생육상태(生育狀態) 및 수량구성요소(收量構成要素)와 수량(收量)을 조사(調査)하였다. 1. 약해정도(藥害程度)는 Zhy-Lian-Ai-Yun-Nam이 가장 경미하였고 다음으로 한강찰벼, 원풍벼, 청청벼, 삼성벼의 순으로 심하였다. 2. 약해(藥害)는 토장(草長)보다 분얼수(分蘖數)에 더 크게 영향하였다. 전품종(全品種)에서 주당수수(株當穗數)의 감소가 컸으나 그 정도는 품종간(品種間)에 약간의 차이가 있었다. 3. 수량(收量)은 약해(藥害)가 낮은 Zhy-Lian-Ai-Yun-Nam이 수량감소가 가장 컸고 약해가 심하였던 삼성벼와 청청벼는 약해에 비하여 수량감소가 적었는데 이는 주당수수(株當穗數)의 감소에 상응(相應)하여 주당영화수(株當潁花數)가 증가(增加)하였기 때문이다. 4. 약해(藥害)가 중간정도(中間程度)였던 한강찰벼와 원풍벼는 주당수수감소(株當穗數減少)에 따라 주당영화수(株當潁花數)가 증가하지 않았고 또 원풍벼는 1,000립중(粒重) 감소하여 수량감수가 컸다.

• 한국한의학연구원논문집
• /
• 제4권1호통권4호
• /
• pp.115-127
• /
• 1998

To improve the quality control of frequently used oriental medicinal plants, the storage, cutting, processing and decokting methods of Rehmannia glutinosa Libosch. var. purpurea Makino(熟地黃) were examined. The contents of 5-hydroxymethyl-2- furaldehyde(5-HMF) of Rehmannia glutinosa Libosch. var. purpurea Makino were analysed by HPLC at various conditions as the standard component. Raw materials were classified into 3 groups with their specific gravity(天 地 人黃) and determined the ding weights and the contents of water, the solid component of Ji-Hwang(地黃) was the most. Rehmannia glutinosa Libosch. var purpurea Makino was steamed and dried nine times and analysed the content of 5-HMF on every time. In the case of Ji-Hwang, the standard component of the ninth sample was produced the most. But which of the tenth samples of Chun-Hwang and Yin-Hwang(天黃 人黃) were the most. The best decokting conditions which were determined by the yield of 5-HMF were as follows : non cutting, soaking time was 0 minutes, decokting time was 75 minutes after boiling. The contents of sugar on each of samples were determined. The contents of standard component increased by steaming number and the contents of sugar decreased.

• Smart Structures and Systems
• /
• 제30권1호
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.