• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.2
• /
• pp.99-104
• /
• 1993

With a purpose of finding out the effects of phosphatic fertilizer application at the grassland establishment and management on the dry matter yield and quality of grasses, a field experiment was arranged with four treatments as a randomized complcte block design and lasted from September, 19 89 to October, 1991 in hilly area near Suwon. The results obtained are summarized as follows: 1. As a early plant growth. winter hardiness. growth vigour and coverage of grasses of the plots with phosphatic fertilizer were better than those of the plots without $P_2O_5$. and the effect of application at the management was much better than that at the establishment of grassland. 2. The effect of phosphatic fertilizer on DM yield of legume was higher than of grass. Total DM yield with phosphatic fertilizer at the only establishment (5.688 kg/ha). at the only management (8.014 kg/ha) and at both the establishment and management of grassland (1 1,082 kg/ha) was much more increased by 38, 95 and 169% than that without phosphatic fertilizer (4.1 19 kg/ha), respectively. 3. The chemical component of crude protein and crude fat with phosphatic fertilizer was a little higher, on the other hand, content of NFE was lower than that without $P_2O_5$ fertilization, but the contents of crude fiber and crude ash did not tend to differentiate between treatments. 4. Production of encrgy(TDN, StE and NEL) with phosphatic fertilization at the establishment and the management of grassland was appeared to increase by 34 to 390h and 72 to 99% than that without $P_2O_5$, respectively. Production of curde protein with $P_2O_5$ tended to be similar to production of energy.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.6
• /
• pp.441-445
• /
• 2011

This research was conducted to investigate the influence of variouis organic substrates on growth and yield of organically grown ginseng seedlings in a shaded plastic house. In the investigation of optimal substrate, the eight substrate were formulated by adjusting blending rate of peatmoss, perlite, coir dust(coco peat), and vermiculite. Then, the changes in physico chemical properties of root substrates as well as their influences on the growth characteristics and yield were determined at six months after sowing. The elevation of the blending rate of peatmoss from 50% to 70% with decrease in the rate of inorganic component (mixture of perlite and vermiculite) from 50 to 30% resulted in the increase in container capacities and decrease in total porosities and air-filled capacities. The concentrations of $NH_4-N$, $P_2O_5$ and K increased as the incorporation rate of castor seed meal, phosphate ore, and langbenite, respectively, were elevated during the root medium formulations. The PPV-1 and PPV-4 substrates produced high stem length, stem diameter, shoot fresh weight, leaf area and root length among eight substrate. Root fresh weight was heaviest in PPV-4 compound nursery media. The results of this experiment will be utilized in the new substrate application for ginseng organic culture in shaded vinyl house.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.81-84
• /
• 2014

To examine the microenvironmental effect of DNA on the photosensitized reaction, the electron-donor-connecting porphyrin, meso-(9-phenanthryl)-tris(N-methyl-p-pyridinio) porphyrin (Phen-TMPyP), was synthesized. Phen-TMPyP can bind to oligonucleotides with two binding modes, depending on the DNA concentration. The fluorescence lifetime measurement of Phen-TMPyP shows a shorter component than that of the reference porphyrin without the phenanthryl moiety. However, the observed value is much longer than those of previously reported similar types of electron-donor-connecting porphyrins, suggesting that electron-transfer quenching by the phenanthryl moiety is not sufficient. The fluorescence quantum yield of Phen-TMPyP ($5{\mu}M$) decreased with an increase in DNA concentration of up to $5{\mu}M$ base pair (bp), possibly due to self-quenching through an aggregation along the DNA strand, increased with an increase in DNA concentration of more than $5{\mu}M$ bp and reached a plateau. The fluorescence quantum yield of Phen-TMPyP with a sufficient concentration of DNA was larger than that of the reference porphyrin. The singlet oxygen ($^1O_2$) generating activity of Phen-TMPyP was confirmed by the near-infrared emission spectrum measurement. The quantum yield of $^1O_2$ generation was decreased by a relatively small concentration of DNA, possibly due to the aggregation of Phen-TMPyP, and recovered with a sufficient concentration of DNA. The recovered quantum yield was rather smaller than that without DNA, indicating the quenching of $^1O_2$ by DNA. These results show that a DNA strand can stabilize the photoexcited state of a photosensitizer and, in a certain case, suppresses the $^1O_2$ generation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.4
• /
• pp.493-498
• /
• 1986

In order to evaluate the effect of various cultural methods developed during last 30 years on grain yield of wheat and barley and structure of plant stand for uptake of nutrient and water, solar energy use and com-petitive capacity with weed, 10 kinds of cultural practices were compared in the clayey upland soil. Row fertilization is more effective for uptake of N,P and K than rotary fertilization. Weed occurrence was deeply related with width of non-seeded area in the row and affected yield decrease. Winter injury was more serious in the cultural practices with thick plant community than in those with isolated individual plant. Root distribution was more remarkable in drill seeding or broadcasting than row seeding and had positively correlated with water consumption of barley.

• Korean Journal of Organic Agriculture
• /
• v.8 no.3
• /
• pp.91-98
• /
• 2000

This study was conducted to investigate the effects of microbial fertilizers on the yields of chard, chemical components of plant and soil, and the microbial floras. Six microbial fertilizers, MPK+Husk+Palma, Husk+palma, MPK+Compost, Compost, Bio livestock cattle system (BLCS) cattle dropping, and Tomi, were used. The yield of chard in six microbial fertilizer treatments was higher than that of control. The BLCS cattle dropping treatment showed the highest yield of chard among six microbial fertilizer treatments. Only one component, MgO in chard was increased with all treatments compared with control, Two components, K and Mg, in soil were increased with Tomi treatment. The number of total bacteria and bacillus was increased in soil that treated with Tomi, Husk+palma, and MPK+Husk+Palma. The number of actinomycetes and fungi was also increased with Tomi treatment. It appears that the microbial fertilizers increase the yield of chard by forming the useful microbial floras.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.205-209
• /
• 1999

Chinese foxglove(Rehmannia glutinosa) is receiving much attention as one of the principal medicinal crops and the crud drug. This study was conducted to obtain the basic breeding information of Chinese foxglove derived from tissue culture. To compare plant characteristics between local variety and tissue cultured seedlings, plant growth and root yield has been investigated. In addition, catalpol and free sugar contents were also analized. The ability for the storage of root stock originated from tissue culture seedlings were better than that of local variety. The growth and root yield of in vitro propagated plants were superior to those of conventionally propagated plants. Root yield of 1-year-old and 2-year-old seedlings investigated 112% and 246% respectively than Seacheon local shows 384 kg/10 a. Although there were no significant different between tissue culture seedlings and conventionally propagated one, slight decline of component contents in tissue culture plants were still existed. Investigated sugar content among Seocheon local, 1-year-old tissue culture seedlings, and 2-year-old tissue culture seedlings were 1.86%, 1.21%, and 1.10% respectively. Catalpol content as one of standard materials indicates 0.46% in Seocheon local and 0.40% in tissue cultured ones.

• Korean Journal of Weed Science
• /
• v.9 no.2
• /
• pp.103-107
• /
• 1989

Five rice cultivars were treated by four dose of butachlor at transplanting seedling stage. Visual injury rate by butachlor was lowest in Zhy-Lian-Ai-dun-Nam and highest in Samseungbyeo, but reduction of yield was higher in Zhy-Lian-Ai-Yun-Nam and Hangangchalbyeo than in Samseungbyeo and Cheungcheungbyeo. Reduction of panicle number by butachlor was most effective factor to yield reduction.

• Korean Journal of Oriental Medicine
• /
• v.4 no.1 s.4
• /
• pp.115-127
• /
• 1998

To improve the quality control of frequently used oriental medicinal plants, the storage, cutting, processing and decokting methods of Rehmannia glutinosa Libosch. var. purpurea Makino(熟地黃) were examined. The contents of 5-hydroxymethyl-2- furaldehyde(5-HMF) of Rehmannia glutinosa Libosch. var. purpurea Makino were analysed by HPLC at various conditions as the standard component. Raw materials were classified into 3 groups with their specific gravity(天 地 人黃) and determined the ding weights and the contents of water, the solid component of Ji-Hwang(地黃) was the most. Rehmannia glutinosa Libosch. var purpurea Makino was steamed and dried nine times and analysed the content of 5-HMF on every time. In the case of Ji-Hwang, the standard component of the ninth sample was produced the most. But which of the tenth samples of Chun-Hwang and Yin-Hwang(天黃 人黃) were the most. The best decokting conditions which were determined by the yield of 5-HMF were as follows : non cutting, soaking time was 0 minutes, decokting time was 75 minutes after boiling. The contents of sugar on each of samples were determined. The contents of standard component increased by steaming number and the contents of sugar decreased.

• Smart Structures and Systems
• /
• v.30 no.1
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.1
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.